Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 009R2013 screw plug with a 1/2 in BSP thread provides a secure sealing point in the crankcase, cylinder head, and engine covers on BUKH DV36 and DV48 marine diesel engines. Designed for dependable closing of service and inspection ports, it helps maintain proper oil and coolant containment and supports clean, reliable engine operation. |
$ 40.96
-
+
|
|
1-2 weeks delivery time The Bukh 009R2015 pipe plug is a 3/4 in BSP threaded plug used on the rear-end rotating weight and fuel lift pump area of BUKH DV36 and DV48 marine diesel engines. It seals a threaded port to help prevent fluid leaks, maintain system integrity, and support clean, serviceable engine and fuel-system operation onboard. |
$ 46.61
-
+
|
|
1-2 weeks delivery time The Bukh 018 592 003 adapter is a fuel-system connection component for BUKH S270J marine diesel engines. Designed to support correct fit-up between fuel-side parts, it helps maintain a secure, dependable interface within the fuel assembly for steady operation in marine service. |
$ 19.42
-
+
|
|
1-2 weeks delivery time The Bukh 019 230 000 oil pan plug provides a secure sealing point for the oil pan on BUKH R210J and S270J marine diesel engines. Designed for dependable service in the lubrication system, it helps keep engine oil contained where it belongs and supports clean, controlled oil draining during routine maintenance. |
$ 3.55
-
+
|
|
1-2 weeks delivery time The Bukh 020D2157 instrument panel unit in the hat corner version provides a clean, marine-ready control and display interface for your vessel’s engine instrumentation. Designed as a direct replacement panel, it supports orderly mounting of gauges and switches for clear monitoring and confident operation underway. |
$ 2,538.44
-
+
|
|
1-2 weeks delivery time The Bukh 020D2336 cable kit is a ready-to-use kit intended for Bukh cable installations, helping streamline replacement or service work where a matched set of cabling components is required. Supplied as a complete kit, it supports a clean, dependable installation approach for marine onboard systems. |
$ 4,850.31
-
+
|
|
1-2 weeks delivery time The Bukh 020D4101 manual oil hand pump with hose is a practical service component for controlled oil transfer during marine engine maintenance. Supplied as a pump-and-hose set and cross-referenced to 008E1190, it helps support clean, efficient oil handling when servicing BUKH systems. |
$ 259.67
-
+
|
|
1-2 weeks delivery time The Bukh 020D4316 water-cooled exhaust manifold provides controlled exhaust gas routing and effective water-jacket cooling for BUKH DV10M, DV18, and DV20 marine diesel engines. Built as an OEM-fit replacement, it helps manage exhaust temperatures in the manifold area while supporting dependable operation of the engine’s exhaust system in marine service. |
$ 293.93
-
+
|
|
1-2 weeks delivery time The Bukh 020D4329 mixing tube spare parts kit is designed to support maintenance of the engine mixing tube assembly on Bukh marine diesel installations. This service kit is a practical choice for restoring correct function after wear or disassembly, helping keep the mixing tube system reliable for ongoing operation. |
$ 462.64
-
+
|
|
1-2 weeks delivery time The Bukh 020D9410 elastic bearing set (4 pieces) supports secure engine mounting on BUKH DV10ME marine diesel installations while helping to reduce vibration transfer into the hull and surrounding structure. Ideal for replacement during refits or routine service, this set restores stable alignment and smoother running in the engine mounting arrangement. |
$ 581
-
+
|
|
1-2 weeks delivery time The Bukh 020D9714 side-mounting T-handle grip provides a secure, easy-to-hold interface for Bukh side mounting hardware. Designed to support confident handling during installation and service, it helps maintain dependable operation where a robust hand grip is required on the mounting arrangement. |
$ 425.73
-
+
|
|
1-2 weeks delivery time The Bukh 022D0040 DV24ME engine assembly with a 3.0:1 reduction is built as a purpose-designed BUKH ME marine diesel package, delivering 24 effective horsepower for safe, dependable operation. Its straightforward layout supports easy maintenance, while a balanced counterweight system helps neutralize vibration and tight tolerances across moving parts help keep mechanical noise low. Automatic fuel control supports efficient fueling matched to the immediate load. |
$ 34,993.94
-
+
|
|
1-2 weeks delivery time The Bukh DV24ME HE marine diesel engine assembly (022D0046) combines a 3.0:1 reduction drive with an integrated heat exchanger to support dependable propulsion and steady cooling on board. Designed as a purpose-built marine engine rather than a converted industrial unit, it delivers 24 effective horsepower, simplified maintenance, low vibration through a balanced counterweight system, and quiet running from tight tolerances in key moving components, while automatic fuel control helps match fuel delivery to the immediate load. |
$ 38,479.65
-
+
|
|
1-2 weeks delivery time The Bukh 022D4103 Solas tool and spare parts kit combines essential service items and onboard tools for BUKH DV24, DV29, and DV32RME marine diesel engines. The kit includes an oil filter, fuel filter, V-belt, wrench and tool kit, oil suction pump, and oil can—ideal for routine maintenance and practical onboard readiness. |
$ 1,386.67
-
+
|
|
1-2 weeks delivery time The Bukh 022D6613 cooling water heater is a 42V, 350W heating unit designed to warm the engine cooling water circuit on BUKH 2-cylinder and 3-cylinder marine diesel engines. With a 16 mm hose connection, it supports easier cold starts and quicker warm-up by preheating coolant before startup. |
$ 4,219.69
-
+
|
|
1-2 weeks delivery time The Bukh 022D9404 elastic engine mounting set (4 pieces) supports secure installation of BUKH DV20 to 32ME marine diesel engines while helping absorb vibration and reduce transmitted noise through the hull structure. These mounting feet are designed to maintain stable engine positioning, supporting alignment and smooth running in demanding marine service. |
$ 581
-
+
|
|
1-2 weeks delivery time The Bukh 022T0056 DV32ME diesel engine unit with a 3.0:1 reduction is built as a true marine engine for dependable propulsion, delivering 32 horsepower for confident, trouble-free operation. Its straightforward design supports easy maintenance, while a balanced counterweight system helps neutralize vibration and tight tolerances reduce mechanical noise across bearings, gears, pistons, and connecting rods. Automatic fuel control meters fuel to match the immediate load for smooth, efficient running. |
$ 40,923.94
-
+
|
|
1-2 weeks delivery time The Bukh 022T0058 DV32ME HE marine diesel engine assembly combines a 3.0:1 reduction drive with an integrated heat exchanger to deliver dependable propulsion for BUKH ME diesel engine installations. With 32 effective horsepower and a purpose-built marine design, it supports smooth running through balanced counterweights, low noise through tight tolerances in moving parts, and efficient operation via automatic fuel control matched to the immediate load. |
$ 44,411.69
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.