Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E5203 left-side engine support mount secures and stabilizes BUKH DV36 and DV48 marine diesel engines at the crankcase, cylinder head, and cover assembly area. It helps keep the engine properly supported in the hull structure, maintaining alignment and reducing unwanted movement during operation. |
$ 192.05
-
+
|
|
1-2 weeks delivery time The Bukh 008E5207 fuel pipe is a dedicated fuel line used in the fuel system pipework on BUKH DV36 and DV48 marine diesel engines. Installed within the fuel injection and valves assembly and also used with the DV48 lubrication pump pipe set, it supports clean, consistent fuel routing to keep the engine’s fuel delivery system operating reliably. |
$ 188.86
-
+
|
|
1-2 weeks delivery time The Bukh 008E5209 fuel pressure pipe set is designed to route pressurized fuel within the fuel injection system on BUKH DV36 and DV48 marine diesel engines. Used in the fuel injection and valves assembly—and also applied on DV48 engines with the lubrication pump and pipework—this line set supports clean, stable fuel delivery to keep injection performance consistent and dependable. |
$ 538.24
-
+
|
|
1-2 weeks delivery time The Bukh 008E5435 T-elbow is a water-line fitting for BUKH DV36 marine diesel engines, designed to form a secure T-connection within the engine’s water circuit. It helps route flow cleanly through the cooling plumbing, supporting dependable circulation and tidy hose runs in the installation. |
$ 230.57
-
+
|
|
1-2 weeks delivery time The Bukh 008E5557 governor arm is a control linkage component used on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Fitted within the governor and regulating handle mechanism and also referenced in the camshaft and lubricating oil pump and filter assembly on DV24RME, it helps transmit movement for stable, responsive engine speed regulation. |
$ 176.78
-
+
|
|
1-2 weeks delivery time The Bukh 008E5821 top saildrive boot is a sealing component for Bukh saildrive installations, positioned at the upper boot location to help keep the saildrive housing properly sealed. It supports a clean, secure interface that helps protect the driveline area from water ingress and maintains dependable operation in marine conditions. |
$ 999.25
-
+
|
|
1-2 weeks delivery time The Bukh front engine support is designed for DV10 and DV20S marine engine mounting applications. |
$ 144.01
-
+
|
|
1-2 weeks delivery time The Bukh front engine support is designed for DV10 and DV20 marine engine mounting applications. |
$ 203.47
-
+
|
|
1-2 weeks delivery time The Bukh 008E6065 outlet pipe is a dedicated line used in the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. Designed to route oil cooler outlet flow correctly within the engine’s cooling and lubrication package, it supports stable operating temperatures and dependable system circulation under continuous marine load. |
$ 245.07
-
+
|
|
1-2 weeks delivery time The Bukh 008E6263 oil cooler pipe assembly is a complete oil pipe for the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. It channels engine oil through the oil cooler block to help control oil temperature and support stable lubrication under continuous marine operating loads. |
$ 545.04
-
+
|
|
1-2 weeks delivery time The Bukh 008E6264 complete oil cooler pipe is a dedicated line for routing oil through the oil cooler circuit on BUKH DV36 and DV48 marine diesel engines. Installed within the injection pump and oil cooler assembly area, it supports correct oil flow to help control operating temperature and protect lubrication performance under continuous marine load. |
$ 429
-
+
|
|
1-2 weeks delivery time The Bukh 008E6532 air filter element is designed to protect the intake system on BUKH DV10L, DV10ME, DV18, and DV20 marine diesel engines. By filtering airborne contaminants before they reach the engine, it helps support clean combustion, stable performance, and reduced wear in the air intake path. |
$ 465.17
-
+
|
|
1-2 weeks delivery time The Bukh 008E6577 thermostat element regulates coolant flow in the seawater cooling system for BUKH DV10, DV10L, DV20, and DV24 marine diesel engines. With a 60 degree opening temperature, it helps the engine reach and maintain an efficient operating temperature by controlling when cooling flow is allowed to circulate through the system. |
$ 212.49
-
+
|
|
1-2 weeks delivery time The Bukh 008E6587 thermostat element is a 60 degree temperature-control component for the seawater cooling system on BUKH DV36 marine diesel engines. It helps regulate coolant flow based on operating temperature, supporting steady warm-up behavior and stable running temperatures in marine service. |
$ 288.63
-
+
|
|
1-2 weeks delivery time The Bukh 008E6745 fuel supply pipe routes diesel fuel from the fuel filter to the fuel injection pump on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed for the engine’s fuel line group alongside the lift pump and filter, it supports clean, consistent fuel delivery to help maintain stable injection performance and dependable operation underway. |
$ 196.08
-
+
|
|
1-2 weeks delivery time The Bukh 008E6998 engine wiring harness is a complete main electrical loom for BUKH DV36 and DV48 marine diesel engines. Designed for the engine’s primary electrical system, it organizes and protects key circuits to support dependable power distribution and clean, service-friendly connections in the engine room. |
$ 356.69
-
+
|
|
1-2 weeks delivery time The Bukh 008E7084 rear engine mount provides secure rear support for the marine engine installation on BUKH DV24RME, DV29RME, and DV32 engines, including applications with M 60 reversing gear mounting. Designed for the rear engine support position, it helps stabilize the powertrain, maintain alignment, and reduce unwanted movement in the engine mounting arrangement. |
$ 322.20
-
+
|
|
1-2 weeks delivery time The Bukh 008E7086 rear engine mount provides secure aft support for BUKH DV24RME, DV29RME, and DV32 marine diesel installations. Used in the engine support arrangement and for mounting the M 60 reversing gear, it helps keep the powertrain properly supported and aligned to reduce vibration transfer and maintain dependable drivetrain operation onboard. |
$ 322.20
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.