Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E9391 connecting pipe with oil trap is an intermediate air-intake pipe for BUKH DV32 marine diesel engines, positioned in the air inlet and turbocharger area. It guides intake airflow between components while capturing oil carryover, helping keep the intake tract cleaner and supporting stable turbocharger and engine breathing performance. |
$ 1,676.85
-
+
|
|
1-2 weeks delivery time The Bukh 008E9694 distributor plate with buzzer is a control-panel component used on multiple BUKH marine diesel engine installations, integrating an audible buzzer function for clear onboard alert signaling. Designed as a direct replacement distributor plate for the control panel assembly, it supports reliable operator notification and tidy electrical distribution across DV and EPA engine panel setups. |
$ 143.99
-
+
|
|
1-2 weeks delivery time The Bukh 008E9811 charge pressure hose is a dedicated air-system hose for BUKH DV48 marine diesel engines, used within the air inlet and turbocharger assembly. It supports stable boost-pressure control by routing charge pressure to the relevant control function, helping the turbocharged air system respond cleanly under changing engine load. |
$ 459.74
-
+
|
|
1-2 weeks delivery time The Bukh 00900-1U1B0 engine support cover is a dedicated cover used on the intake manifold assembly of BUKH R210J marine diesel engines. Designed for a secure OEM-style fit, it helps protect and complete the intake manifold area, supporting reliable air-intake system operation in marine service. |
$ 35.05
-
+
|
|
1-2 weeks delivery time The Bukh 00900-2R121 port-side oil filter is a dedicated filtration element for the oil pan area on BUKH R210J marine diesel engines. It helps keep the lubricating oil cleaner by trapping contaminants, supporting stable oil flow and protecting internal engine components during continuous marine operation. |
$ 888.66
-
+
|
|
1-2 weeks delivery time The Bukh 00900-2R181 V-belt set is a six-piece belt drive replacement package for BUKH R210J marine diesel engines. Designed for the engine’s drive belt system, these belts transmit power to belt-driven accessories and help maintain stable, low-slip operation when replacing worn or stretched belts. |
$ 314.88
-
+
|
|
1-2 weeks delivery time The Bukh 00900-2R182 belt-drive component is a drive belt (6PK 2415) for the belt drive system on BUKH R210 and R210J marine diesel engines. It provides dependable power transmission from the engine to belt-driven auxiliaries, supporting stable operation and consistent accessory performance underway. |
$ 305.23
-
+
|
|
1-2 weeks delivery time The Bukh 00900-2R1S1 thermostat is a temperature-control component for the cooling circuit on BUKH R210J marine diesel engines. Positioned within the coolant pipe and hose assembly, it regulates coolant flow to help the engine reach operating temperature efficiently and maintain stable cooling during varying load and seawater conditions. |
$ 158.08
-
+
|
|
1-2 weeks delivery time The Bukh 00900-5S1P0 crankshaft pulley damper helps stabilize belt drive operation on BUKH S270J marine diesel engines by reducing torsional vibration at the crankshaft. Positioned within the crankshaft and piston assembly area, it supports smoother power transmission to front-end accessories and helps protect connected drive components under varying load conditions. |
$ 980.83
-
+
|
|
1-2 weeks delivery time The Bukh 00900-BS010 engine assembly kit A is a purpose-matched kit for the Engine Assembly A on BUKH S270J marine diesel engines. Built for correct fit within the engine assembly, it supports dependable servicing and restoration of the engine’s core build so your propulsion system stays reliable in continuous marine operation. |
$ 82,673.18
-
+
|
|
1-2 weeks delivery time The Bukh 00900-BS020 Engine Assembly Kit B is a dedicated engine assembly package for BUKH S270J marine diesel engines, intended for use within the Engine Assembly B group. It supports correct engine assembly and service work by providing a matched kit for this specific engine assembly section, helping maintain OEM fit and dependable operation onboard. |
$ 62,004.94
-
+
|
|
1-2 weeks delivery time The Bukh 00900-BS1C0 engine cover assembly is a protective cover unit for the engine mount area on BUKH S270J marine diesel engines. Designed for a clean OEM-style fit, it helps shield the mounted engine area from onboard exposure while supporting a tidy, service-friendly engine installation. |
$ 1,432.01
-
+
|
|
1-2 weeks delivery time The Bukh 00900-BS1C1 engine cover is a protective cover component used on the engine mount area of BUKH S270J marine diesel engines. Designed for a secure OEM-style fit, it helps shield surrounding engine-mount hardware from onboard exposure while keeping the installation looking clean and service-friendly. |
$ 1,400.84
-
+
|
|
1-2 weeks delivery time The Bukh 00920-1U200 stern coupling is a flywheel-housing mounted coupling component for BUKH R210J marine diesel engines. It supports secure power transmission at the aft end of the engine interface, helping maintain a stable, aligned connection within the flywheel housing area for dependable propulsion service. |
$ 7,051.88
-
+
|
|
1-2 weeks delivery time The Bukh 00940-BS151 front-left engine hanger ring-eye is a lifting and mounting hardware component used on the main bracket of BUKH S270J marine diesel engines. It provides a secure attachment point for handling and positioning the engine, supporting correct alignment and safe service work around the engine mounting arrangement. |
$ 140.03
-
+
|
|
1-2 weeks delivery time The Bukh 00940-BS152 rear left engine hanger provides secure engine support for BUKH S270J marine diesel installations. Positioned at the rear left side of the engine at the cylinder head area, it helps keep the powerplant properly located on its mounts, reducing movement under load and maintaining correct alignment in the engine bay. |
$ 116.73
-
+
|
|
1-2 weeks delivery time The Bukh 00940-BS155 PTO engine mount insulator is a dedicated mounting component for BUKH S270J marine diesel installations, positioned at the engine mount on the PTO side. It supports secure engine seating while helping isolate operational vibration and shock loads to protect the drivetrain alignment and improve onboard comfort. |
$ 717.08
-
+
|
|
1-2 weeks delivery time The Bukh 009R2012 heating-connection plug with a 3/8 in BSP thread is used to seal a heating connection point on BUKH marine diesel assemblies. Suitable for DV24RME, DV29RME, DV32, DV36, and DV48 installations, it supports leak-tight operation on water-cooled exhaust manifolds and on circulation pump housings where a secure threaded blanking plug is required. |
$ 26.52
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.