Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E7310 air filter element supports clean, stable intake airflow across multiple BUKH marine diesel platforms, including DV24RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 engines. Positioned in the air intake system (and on some models serving the air inlet and turbocharger supply), it helps protect internal engine components by reducing airborne contamination before it enters the induction path. |
$ 337.95
-
+
|
|
1-2 weeks delivery time The Bukh 008E7317 complete piston unit is a ready-to-install replacement component for the piston group on BUKH DV10 and DV20 marine diesel engines. Designed to restore proper compression and smooth combustion, it supports efficient power delivery and dependable operation under continuous marine load. |
$ 890.14
-
+
|
|
1-2 weeks delivery time The Bukh 008E7347 diode plate is a rectifier component used in Bukh marine electrical charging circuits, helping convert alternator output into stable direct current for battery charging and onboard loads. Supplied as a dedicated diode plate unit, it supports reliable charging performance and clean electrical output in marine engine installations. |
$ 141.38
-
+
|
|
1-2 weeks delivery time The Bukh 008E7523 pressure pipe screw is a fastening component used on the lubrication pump with pipes assembly for BUKH DV36 marine diesel engines. It helps secure the pressure pipe connection so the lubrication system stays tight and dependable, supporting stable oil delivery where it matters most. |
$ 291.70
-
+
|
|
1-2 weeks delivery time The Bukh 008E7679 complete piston unit with pin and rings is built for the reciprocating assembly in BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed in the crankshaft and connecting rod group, it helps restore proper compression, smooth power delivery, and dependable cylinder sealing during overhaul or replacement. |
$ 1,037.44
-
+
|
|
1-2 weeks delivery time The Bukh 008E7805 complete camshaft unit is built for the camshaft drive group on BUKH DV24, DV29, DV29RME, and DV32 marine diesel engines. Designed to restore accurate valve timing, it supports smooth engine operation and dependable lubrication-system integration within the camshaft, lubricating oil pump, and lubricating oil filter assembly. |
$ 2,444.57
-
+
|
|
1-2 weeks delivery time The Bukh 008E7900 vacuum bleeder valve assembly helps purge trapped air and stabilize system operation on BUKH DV24RME and DV29RME marine diesel engines. Used within the governor and regulating handle assembly and also on the DV24RME camshaft area with the lubricating oil pump and oil filter group, this complete valve supports smooth regulation and dependable oil-system serviceability during maintenance. |
$ 528.73
-
+
|
|
1-2 weeks delivery time The Bukh 008E7903 high-pressure injection line for cylinder 1 is a fuel pressure pipe used in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports accurate, reliable delivery of pressurized fuel within the injection system, helping maintain consistent engine performance and dependable starting under marine operating conditions. |
$ 214.54
-
+
|
|
1-2 weeks delivery time The Bukh 008E7904 high-pressure injection line for cylinder 2 is a fuel pressure pipe used in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly group on BUKH DV24RME, DV29RME, and DV32 engines. It routes pressurized fuel to the cylinder 2 injector with an OEM-style fit, supporting consistent injection performance and dependable running under marine operating conditions. |
$ 214.54
-
+
|
|
1-2 weeks delivery time The Bukh 008E7962 bleeder valve pipe provides a secure connection for venting and bleeding through the bleeder valve on BUKH DV24RME and DV29RME engines. Used across the governor and regulating handle assembly and the camshaft, lubricating oil pump, and lubricating oil filter assembly (DV24RME), this pipe helps support clean, controlled bleeding during service and reliable system operation. |
$ 315.80
-
+
|
|
1-2 weeks delivery time The Bukh 008E8052 rotating-weight guard is a protective cover used at the crankcase and front end cover area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps shield rotating components from accidental contact and supports a safer, more protected engine front-end installation in service. |
$ 315.80
-
+
|
|
1-2 weeks delivery time The Bukh 008E8131 rocker arm oil feed pipe supports dependable top-end lubrication on BUKH DV29RME and DV32 marine diesel engines. Installed within the camshaft and lubrication system area alongside the lubricating oil pump and oil filter, it routes engine oil to the rocker arm gear to help maintain smooth valvetrain operation and reduce wear under continuous marine running. |
$ 159.10
-
+
|
|
1-2 weeks delivery time The Bukh injection pipe is intended for marine diesel fuel injection line service applications. |
$ 240.86
-
+
|
|
1-2 weeks delivery time The Bukh injection pipe is designed for marine diesel injector line replacement applications. |
$ 240.86
-
+
|
|
1-2 weeks delivery time The Bukh 008E8207 sacrificial zinc anode is designed for saildrive corrosion protection on BUKH DV8SME and DV10LSME installations. Fitted to the saildrive unit, it helps shield underwater metal components by sacrificing itself first, supporting longer service life and more reliable operation in harsh seawater environments. |
$ 78.57
-
+
|
|
1-2 weeks delivery time The Bukh 008E8219 turbocharger return pipe is a formed return-line component designed for the turbocharger system on Bukh marine engines. It helps route return flow away from the turbocharger in a controlled, secure way, supporting clean installation, dependable operation, and OEM-correct fit during service replacement. |
$ 670.17
-
+
|
|
1-2 weeks delivery time The Bukh 008E8223 turbocharger lubricating pipe provides a secure oil supply line within the air inlet and turbocharger assembly for BUKH DV48 marine diesel engines. Designed as an OEM-fit replacement, it supports dependable turbocharger lubrication to help maintain smooth operation and protect critical rotating components under continuous marine loads. |
$ 412.24
-
+
|
|
1-2 weeks delivery time The Bukh 008E8413 fuel supply pipe is designed to connect the lift pump to the fuel filter on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly, it supports clean, steady fuel delivery to the injection system for dependable starting and smooth running. |
$ 226.03
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.