Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E1589 intermediate bearing hub assembly is a complete intermediate bearing unit used within the crankshaft and bearing group on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports stable shaft alignment and smooth rotation in the engine’s lower-end assembly, helping reduce vibration and maintaining dependable operation under continuous marine loading. |
$ 764.20
-
+
|
|
1-2 weeks delivery time The Bukh 008E2347 stop solenoid mounting bracket provides a secure, correctly aligned mounting point for the stop solenoid on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built to support reliable shutdown operation, it helps keep the solenoid stable against vibration so the fuel shutoff mechanism operates consistently when commanded. |
$ 131.88
-
+
|
|
1-2 weeks delivery time The Bukh 008E2434 return pipe is a dedicated return line for BUKH DV10 marine engines, designed to route returning fluid cleanly back into the system. Built for proper fit within the DV10 installation, it supports tidy hose routing and dependable operation in the engine’s return circuit. |
$ 170.10
-
+
|
|
1-2 weeks delivery time The Bukh 008E2435 return hose is a dedicated return-line hose for BUKH DV20 marine diesel engines, designed to route returning fluid back through the system with a secure, OEM-style fit. It supports clean, reliable plumbing in the engine installation and is ideal for maintenance replacements where dependable hose routing matters onboard. |
$ 207.92
-
+
|
|
1-2 weeks delivery time The Bukh 008E2560 dipstick kit with seal, tube, and fittings is a complete assembly for checking and maintaining correct engine oil level on BUKH marine diesel installations. Supplied as a matched set, it supports clean, accurate oil-level monitoring and helps keep the dipstick mounting point properly sealed; it replaces the earlier article number 008E2449. |
$ 212.59
-
+
|
|
1-2 weeks delivery time The Bukh 008E2780 ring terminal connector is a reliable electrical connection component for Bukh marine engine wiring and onboard electrical installations. Designed to secure a solid terminal-to-stud connection, it helps maintain dependable continuity in vibration-prone marine environments and supports clean, service-friendly electrical assembly. |
$ 78.77
-
+
|
|
1-2 weeks delivery time The Bukh 008E2922 complete stop magnet is a ready-to-install shutdown solenoid unit for BUKH DV8-32 marine diesel engines. It actuates the engine stop function for controlled shutdown, helping ensure dependable operation and straightforward service replacement, and it is listed as replacing 032D0702, 031D0702, and 612E0060. |
$ 1,021.57
-
+
|
|
1-2 weeks delivery time The Bukh 008E3025 chain-and-gearwheel shaft assembly supports the raised hand starting mechanism on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built around a sprocket with axle design, it transmits manual starting motion through the start-drive linkage to help ensure positive engagement and dependable mechanical operation when hand starting is required. |
$ 690.91
-
+
|
|
1-2 weeks delivery time The Bukh shaft with sprocket is intended for marine engine drive and mechanical transmission applications. |
$ 1,578.50
-
+
|
|
1-2 weeks delivery time The Bukh 008E3656 hose nipple with throttle is a keel-cooling connection fitting used on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to join cooling hoses securely while incorporating a built-in flow restriction, it helps regulate coolant circulation through the keel-cooling system for stable operating temperatures and dependable onboard performance. |
$ 152.67
-
+
|
|
1-2 weeks delivery time The Bukh 008E4336 water pipe is a genuine-fit replacement component used to route water through the engine’s water circuit. Designed for marine-duty service, it supports stable coolant or raw-water flow between connected cooling components to help maintain dependable temperature control onboard. |
$ 1,281.97
-
+
|
|
1-2 weeks delivery time The Bukh 008E4392 water-cooled elbow hose is a cooling-system connection hose designed for 2-circuit water-cooled elbow installations. It supports secure coolant and seawater circuit routing at the elbow, helping maintain dependable flow and stable operating temperatures in marine engine service. |
$ 171.96
-
+
|
|
1-2 weeks delivery time The Bukh 008E4476 vent valve is a compact ventilation component used to release trapped air from a marine engine system, helping maintain stable flow and consistent operation. Designed as a Bukh replacement part, it supports reliable service by allowing proper venting where air pockets could otherwise affect performance. |
$ 500.60
-
+
|
|
1-2 weeks delivery time The Bukh 008E4795 rear counterweight is a rotating weight component for the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and BUKH DV48 marine diesel engines. It helps balance rotating forces for smoother operation, supporting stable running and reducing vibration-related stress on connected components. |
$ 1,372.43
-
+
|
|
1-2 weeks delivery time The Bukh 008E4800 front counterweight assembly is a complete rotating weight designed for the flywheel and front-end rotating weight assembly on BUKH DV36 and DV48 marine diesel engines. It supports smooth, balanced rotation of the engine’s rotating mass, helping reduce vibration and promoting stable operation under marine load conditions. |
$ 1,372.43
-
+
|
|
1-2 weeks delivery time The Bukh 008E4821 dipstick with plug provides a secure, screw-connected oil level checking point within the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. Designed for dependable sealing and quick routine inspections, it helps support clean, consistent oil system maintenance in demanding onboard operation. |
$ 329.78
-
+
|
|
1-2 weeks delivery time The Bukh 008E5053 suction pipe and oil strainer complete unit supports clean, consistent oil pickup for BUKH DV36 marine diesel engines. Installed within the lubrication pump pipework, it helps protect the lubrication system by straining contaminants before oil is drawn into the pump, promoting stable oil flow and dependable engine protection at sea. |
$ 465.27
-
+
|
|
1-2 weeks delivery time The Bukh 008E5201 right-side engine mount is a dedicated support component for the crankcase, cylinder head, and covers area on BUKH DV36 and DV48 marine diesel engines. It helps secure the engine in its mounting arrangement, supporting proper alignment and reducing unwanted movement for smoother, more reliable operation onboard. |
$ 172.77
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.