Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 00760-2H200 NMEA 2000 assembly is a converter kit built to integrate BUKH R210J and S270J marine engines with an NMEA 2000 network. It supports clean engine-data interfacing for compatible marine electronics, helping simplify installation and deliver reliable communication between the engine and onboard displays. |
$ 2,248.30
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1G1 digital coolant temperature gauge provides clear, at-a-glance monitoring of engine coolant temperature on BUKH R210J and S270J marine diesel installations. Designed for the instrument panel, it helps operators track warm-up and running temperature to support safe operation and protect the cooling system during real-world marine duty. |
$ 1,044.90
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1G3 digital battery voltage gauge provides clear monitoring of onboard battery voltage for BUKH R210J and S270J instrument installations, including the S270J insulated system. Designed for marine engine panels, it helps you verify charging system performance at a glance and supports dependable starting and electrical reliability underway. |
$ 1,044.90
-
+
|
|
1-2 weeks delivery time The Bukh chrome engine speed gauge (RPM gauge) is a marine instrument designed for BUKH R210J and BUKH S270J engine installations. Built for the instrument panel, it provides clear RPM monitoring to support correct throttle setting, efficient operation, and confident engine supervision underway. |
$ 1,857.62
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1G5 chrome coolant temperature gauge provides clear, at-a-glance monitoring of engine coolant temperature on BUKH R210J and S270J marine diesel installations. Built for the instrument panel, it helps operators spot overheating conditions early, supporting safer operation and protecting the engine’s cooling system during demanding running hours. |
$ 314.16
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1G6 chrome battery voltage gauge is an instrument-panel gauge for BUKH R210J and S270J marine engines, helping operators monitor system voltage at a glance. Installed in the instrument assembly, it supports quick checks of battery and charging performance for confident starting and reliable onboard electrical operation. |
$ 314.16
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1G8 chrome trim gauge is an optional instrument-panel gauge used on BUKH R210J and S270J marine engines, supporting clear trim indication at the helm. Designed to integrate with the trim gauge wiring and instrument setup, it helps the operator monitor trim position for confident handling and repeatable running attitude. |
$ 423.47
-
+
|
|
1-2 weeks delivery time The Bukh 00760-5S1H1 digital wiring harness provides a clean, reliable electrical connection for digital instrumentation on BUKH R210J and S270J marine engines. Built for the instrument system and used with the S270J insulated system, it supports stable signal and power distribution to help keep engine monitoring accurate and dependable underway. |
$ 90.18
-
+
|
|
1-2 weeks delivery time The Bukh 00760-BS1G1 Seaslink dongle is a dedicated service-tool component for BUKH R210J special tool kits. Built to support Seaslink-based connection needs during maintenance and diagnostics workflows, it helps technicians interface correctly within the specified tool kit setup for efficient onboard service. |
$ 874.83
-
+
|
|
1-2 weeks delivery time The Bukh 00800-1U142 cable guide block supports safe, controlled cable routing in the steering system on BUKH R210J marine engines. By guiding the control cable along the intended path, it helps reduce snagging and unwanted friction, contributing to smoother steering operation and dependable control response onboard. |
$ 252.87
-
+
|
|
1-2 weeks delivery time The Bukh 00800-1U144 fastening nut with UNF 7/8-14 thread is built for secure retention in the BUKH R210J steering assembly. It helps keep steering hardware firmly clamped under vibration and cyclic loads, supporting stable alignment and dependable helm response in marine service. |
$ 16.34
-
+
|
|
1-2 weeks delivery time The Bukh 00800-BS100 dummy power steering oil pump is made for the power steering assembly on BUKH S270J marine diesel engines. This pump dummy serves as the specified power steering pump unit for the installation, supporting correct system layout and component matching within the steering arrangement. |
$ 1,359.47
-
+
|
|
1-2 weeks delivery time The Bukh 00800-BS131 power steering oil return hose is designed for the power steering system on BUKH S270J marine diesel engines, providing a secure return path for hydraulic oil back to the reservoir. Built as an OEM-fit replacement, it supports clean, dependable oil circulation and helps maintain consistent steering assist underway. |
$ 64.17
-
+
|
|
1-2 weeks delivery time The Bukh 00800-BS132 power steering oil suction hose is a dedicated suction-line component for the power steering system on BUKH S270J marine engines. It helps deliver a steady supply of hydraulic oil to the power steering circuit, supporting smooth steering response and dependable operation in marine use. |
$ 77.06
-
+
|
|
1-2 weeks delivery time The Bukh 008D8879 fuel pump governor arm is a regulator lever used in the governor and regulating handle system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports precise control of the fuel pump governing linkage for stable speed regulation, and it is also used within the DV24RME camshaft, lubricating oil pump, and lubricating oil filter assembly grouping. |
$ 107.82
-
+
|
|
1-2 weeks delivery time The Bukh 008E0407 front engine support console is a marine engine mounting component that stabilizes the front support point on BUKH DV24RME, DV29RME, and DV32 diesel engines. Designed to keep the engine securely supported in the bed, it helps maintain alignment and reduces unwanted movement and vibration transfer to the hull under load. |
$ 132.76
-
+
|
|
1-2 weeks delivery time The Bukh 008E0409 front engine support console secures the engine in its marine mounting arrangement as the Front Engine Support II configuration for BUKH DV24RME, DV29RME, and DV32 engines. Built to provide stable support at the forward mounting point, it helps maintain alignment and reduces unwanted movement for dependable operation underway. |
$ 132.76
-
+
|
|
1-2 weeks delivery time The Bukh 008E0451 zinc anode with screw connection is a complete sacrificial anode rod designed for the crankcase and front end cover area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps reduce galvanic corrosion in wetted cooling passages, protecting critical engine components and supporting long-term reliability in harsh seawater operation. |
$ 77.16
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.