Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E7668 valve cover sealing gasket is designed to seal the valve cover on BUKH DV24RME, DV29RME, and DV32 marine diesel engines within the cylinder head and valves assembly. It helps maintain a tight joint between the cover and cylinder head to reduce oil seepage, keep the valve gear area protected, and support clean, reliable engine operation. |
$ 128.55
-
+
|
|
1-2 weeks delivery time The Bukh 000E7674 console bracket is a mounting component used to support and secure the console arrangement on BUKH DV24RME, DV29RME, and DV32 marine diesel engines with electric start. Built for proper alignment and stable installation, it helps keep attached hardware firmly positioned in the engine space for dependable operation underway. |
$ 205.71
-
+
|
|
1-2 weeks delivery time The Bukh 000E7675 spacer is a distance piece used in the electric start assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain correct component spacing and alignment within the starter mounting arrangement, supporting secure installation and dependable starting performance. |
$ 17.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E7676 cam follower cup is a precision valve-train component used in the camshaft system on BUKH DV29RME and DV32 marine diesel engines, within the engine group covering the camshaft, lubricating oil pump, and lubricating oil filter. It follows the cam profile to support accurate valve actuation, helping maintain smooth, reliable engine operation. |
$ 192.02
-
+
|
|
1-2 weeks delivery time The Bukh 000E7697 thermostat housing cap secures the thermostat housing in the keel-cooling system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. By properly enclosing the thermostat location, it supports stable coolant temperature control and helps maintain reliable circulation through the engine’s closed-loop cooling circuit. |
$ 229.78
-
+
|
|
1-2 weeks delivery time The Bukh 000E7765 hose retainer secures the coolant water hose in the keel cooling installation on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. By holding the hose firmly in place, it helps maintain clean routing, reduces movement and chafe, and supports reliable coolant circulation throughout the cooling circuit. |
$ 136.59
-
+
|
|
1-2 weeks delivery time The Bukh 000E7766 cylinder head gasket provides a secure seal between the cylinder head and engine block on BUKH DV20 marine diesel engines. Designed to maintain proper compression and keep coolant and combustion gases separated, it supports dependable engine operation and is referenced as 000D9687. |
$ 254.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E7810 regulator spring (2.8 mm) is a precision spring element used in the engine regulator mechanism to support stable control response and consistent operation. Designed as a direct-fit replacement part, it helps maintain dependable regulation characteristics in BUKH marine diesel applications that use this spring size. |
$ 40.96
-
+
|
|
1-2 weeks delivery time The Bukh 000E7866 rear blank end cover is a dedicated closing cover used in the rear end cover and rotating weights area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps protect internal rotating components by sealing the rear end-cover position, supporting clean, reliable operation and an OEM-correct fit during service replacement. |
$ 1,216.07
-
+
|
|
1-2 weeks delivery time The Bukh 000E7882 clamping flange is a pump-mounting component for BUKH pump 39687 applications, securing the pump connection to help maintain stable alignment and a dependable installation in marine service. This part replaces earlier part number 000E4312 and is intended as a direct-fit Bukh replacement for the pump assembly. |
$ 73.92
-
+
|
|
1-2 weeks delivery time The Bukh 000E7986 governor cover is a protective engine cover used on BUKH DV24RME and DV29RME marine diesel engines, fitted around the governor and regulating handle area. It also serves as a cover within the DV24RME camshaft section, helping shield key components around the camshaft, lubricating oil pump, and lubricating oil filter for cleaner, more secure operation in marine engine-room conditions. |
$ 57.86
-
+
|
|
1-2 weeks delivery time The Bukh 000E8062 turbocharger air inlet hose is designed for the air inlet and turbocharger connection on BUKH DV48 marine diesel engines. This hose supports smooth, controlled airflow to the turbocharger, helping maintain stable boost delivery and dependable engine performance on board. |
$ 746.16
-
+
|
|
1-2 weeks delivery time The Bukh 000E8074 return pipe gasket is a sealing element used in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. It helps maintain a tight, leak-resistant joint at the return pipe connection, supporting stable airflow and dependable turbocharger operation in marine service. |
$ 26.52
-
+
|
|
1-2 weeks delivery time The Bukh 000E8138 spacer pipe is a bracket spacing component for the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. It helps maintain correct stand-off distance and alignment at the mounting point, supporting secure installation and reducing the risk of stress or misalignment in connected air-handling components. |
$ 49.01
-
+
|
|
1-2 weeks delivery time The Bukh 000E8217 hexagon nipple is a short 3/4 BSP threaded connector for the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. Designed to provide a secure, service-friendly threaded joint, it helps maintain a reliable connection in the boosted air intake system where tight sealing and vibration resistance are critical. |
$ 286.06
-
+
|
|
1-2 weeks delivery time The Bukh 000E8344 cooling water outlet cover is a sealing cover component for the keel-cooling outlet on BUKH DV36 and DV48 marine diesel engines. It secures the outlet point in the cooling circuit to help maintain controlled coolant flow and a leak-resistant connection, supporting dependable engine temperature management underway. |
$ 355.70
-
+
|
|
1-2 weeks delivery time The Bukh keel cooling washer is intended for marine engine keel cooling system installation applications. |
$ 79.71
-
+
|
|
1-2 weeks delivery time The Bukh 000E8493 claw coupling half is a coupling element for an older-type sprinkler pump drive arrangement. Designed to mate with the matching coupling half, it helps transmit torque while allowing practical service access when removing or refitting the pump in the sprinkler system installation. |
$ 311.16
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.