Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000E8663 thermostat pipe branch is a keel-cooling pipe designed to route coolant flow at the thermostat cover on BUKH DV36 and DV48 marine diesel engines. It supports correct circulation through the thermostat housing area, helping the cooling system regulate engine temperature reliably under marine operating loads. |
$ 83.60
-
+
|
|
1-2 weeks delivery time The Bukh 000E8696 union screw nut is a securing fastener used in the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. It helps keep connected components firmly clamped in place, supporting a stable, leak-resistant installation in the intake and turbocharging system. |
$ 38.57
-
+
|
|
1-2 weeks delivery time The Bukh 000E8870 cylinder head stud set is designed for securing the cylinder head on BUKH DV10 and DV20 marine diesel engines. These studs help maintain correct head clamping force, supporting a stable head-to-block joint and reliable sealing during temperature and load changes in marine operation. |
$ 135.43
-
+
|
|
1-2 weeks delivery time The Bukh 000E8938 sealing gasket for the air inlet filter on BUKH DV29RME marine diesel engines helps maintain a tight, clean air path into the intake system. With a 176 x 80 x 1.5 size, it supports proper filter housing sealing to reduce air leakage and protect engine breathing performance in marine operation. |
$ 64.22
-
+
|
|
1-2 weeks delivery time The Bukh 000E8996 gasket is a sealing element for the BUKH DV32 air inlet and turbocharger assembly, helping maintain a tight joint where intake air components connect. It supports correct airflow routing and reduces the risk of leaks that can affect turbocharger response and overall engine performance in marine operation. |
$ 70.74
-
+
|
|
1-2 weeks delivery time The Bukh 000E9160 air inlet connection piece provides a secure inlet branch connection for the BUKH DV32 air intake and turbocharger assembly. Designed to route and join intake airflow where it enters the induction system, it supports stable engine breathing and dependable turbocharger feed under marine operating conditions. |
$ 238.04
-
+
|
|
1-2 weeks delivery time The Bukh 000E9164 banjo bolt is a secure fastening component used on the BUKH DV32 air inlet and turbocharger assembly. Designed for dependable clamping of a banjo-style connection, it helps maintain a tight, service-ready joint in a high-vibration marine engine environment. |
$ 185.14
-
+
|
|
1-2 weeks delivery time The Bukh 000E9395 oil trap return pipe is a dedicated return line for the air inlet and turbocharger system on BUKH DV32 marine diesel engines. It routes separated oil from the oil trap back through the intended return path, helping keep the intake side cleaner and supporting stable turbocharger and air inlet operation. |
$ 238.04
-
+
|
|
1-2 weeks delivery time The Bukh 000E9455 push rod is a complete valve-train control element used across multiple BUKH DV-series marine diesel engines, including DV29RME, DV32, DV36, and DV48, and is also suitable for DV10M-48 applications. Operating within the camshaft and lubricating-oil assembly or the crankshaft and piston group (depending on engine model), it transmits cam motion to support accurate valve actuation; it replaces earlier part number 000E4988. |
$ 94.24
-
+
|
|
1-2 weeks delivery time The Bukh 000E9513 hose is a cooling-system line for two-circuit and keel cooling installations on BUKH DV24 and DV32 marine diesel engines. Designed as a direct replacement for part number 530Q0008, it supports secure coolant routing within the cooling circuit to help maintain stable engine operating temperatures underway. |
$ 105.34
-
+
|
|
1-2 weeks delivery time The Bukh 000E9514 keel cooling hose is a replacement hose for the keel cooling system on BUKH DV24 and DV32 marine diesel engines. Designed to route coolant through the keel cooling circuit, it helps maintain stable engine temperature and dependable operation, and it replaces part number 530Q0009. |
$ 209.53
-
+
|
|
1-2 weeks delivery time The Bukh 000E9598 bushing spacer supports correct alignment and sealing in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. Used as a bushing on DV32 installations and as a spacer on DV48 setups, it helps maintain stable turbocharger mounting geometry for reliable air delivery and consistent boost performance. |
$ 113.08
-
+
|
|
1-2 weeks delivery time The Bukh 000E9643 fitting is a generator bracket mounting component used in the electric start and alternator assembly on BUKH EPA28 and EPA48 marine engines. It supports secure positioning of the bracket structure to help keep the generator and charging equipment properly aligned under vibration and continuous onboard operation. |
$ 68.33
-
+
|
|
1-2 weeks delivery time The Bukh 000E9644 spacing component is a distance piece used in the electric start and alternator assembly on BUKH EPA28 and EPA48 marine engines. It helps maintain correct alignment and positioning of mounted components, supporting smooth starter engagement and reliable alternator operation in marine service. |
$ 7.48
-
+
|
|
1-2 weeks delivery time The Bukh 000E9681 air inlet gasket provides a secure seal in the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. Designed to help prevent air leaks at the joint, it supports stable airflow to the engine for consistent running and dependable turbocharging performance. |
$ 14.63
-
+
|
|
1-2 weeks delivery time The Bukh 000E9706 spacer bushing is a precision spacing component for the air inlet filter assembly on BUKH EPA28 and EPA36 marine engines. It helps position and support the air filter hardware for correct alignment and secure mounting, contributing to a stable, leak-resistant air intake installation in marine service. |
$ 87.56
-
+
|
|
1-2 weeks delivery time The Bukh 000E9765 turbocharger pipe supports clean, stable airflow routing in the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. Designed as a direct-fit replacement, it helps maintain a secure air path to the turbocharger for consistent boost response and dependable engine operation. |
$ 853.46
-
+
|
|
1-2 weeks delivery time The Bukh 00100-1U122 rear heat exchanger cap secures the rear end of the heat exchanger assembly on BUKH R210J marine diesel engines. It helps maintain a sealed cooling circuit for dependable heat transfer and stable operating temperature in marine service. |
$ 431.94
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.