The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 8713-0005B neoprene impeller delivers hygienic, efficient performance for a range of applications, using food-grade neoprene and 13 flexible blades for effective pumping action. It features a 35 mm shaft diameter with a 2 flat drive design, and its 127 mm diameter and 135 mm length support reliable fit and operation where sanitary handling is important.
|
$ 1,229.90
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8728-0000 mechanical sealing component is a high-quality spare part designed to provide a secure seal for smooth operation and improved efficiency in industrial applications. Engineered to withstand extreme conditions, it supports reliable performance where dependable sealing is critical.
|
$ 285.88
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8728-B mechanical seal is a high-quality spare part engineered to provide a secure seal for smooth operation and improved efficiency in various industrial applications. Built to withstand extreme conditions, this component supports reliable performance where dependable sealing is critical.
|
$ 184.64
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8790000 slinger kit is a durable maintenance set for Jabsco 2620 Series pumps, supplied as a pack of three for reliable service support. Each slinger is sized at 24 mm external diameter, 12 mm internal diameter, and 3 mm thickness to help maintain smooth, efficient pump operation. Built from high-quality, durable rubber or neoprene and designed for easy installation, it provides a cost-effective way to reduce malfunctions, minimize downtime, and extend pump system lifespan in marine and industrial applications.
|
$ 93.26
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8840-0002B high-pressure impeller is a sanitary-grade, 3A Food Grade EPDM rubber component built for hygienic pumping, with an 8-blade design and a 5/8 inch epoxy plastic double-flat shaft hub. Sized at 65 mm diameter and 51 mm depth (2-9/16 inch wide and 2 inch thick), it is intended to deliver smooth, steady, pulsation-free output for both low- and high-viscosity fluids, including gels and pastes, while remaining suitable for shear-sensitive liquids. FDA and 3A certifications and a stated temperature capability up to 185°F (85°C) support reliable performance in demanding applications.
|
$ 369.23
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8840‑0005B high pressure impeller delivers reliable, consistent pumping performance with an 8 blade neoprene design and a plastic insert for durable operation. Food grade neoprene construction with FDA and 3A certifications supports hygienic use, while the 16 mm shaft diameter and double flat drive help ensure a secure fit and dependable power transfer. With a 65 mm diameter and 51 mm depth, it is suited for high pressure applications and can be used in an approximate temperature range of 4°C to 70°C.
|
$ 244.02
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8840-0006B high-pressure nitrile impeller is a durable 8-blade pump component built for demanding service, featuring a nitrile rubber body with a plastic drive core, a 2-9/16 in (65 mm) outer diameter, 2 in (51 mm) depth, and a 5/8 in (16 mm) double-flat shaft drive. It is suitable for liquids including water, oily water, light oils, diesel, and alcoholic beverages such as beer, wine, whiskey, and cider, but it is not recommended for brake fluid. This impeller is commonly used in Jabsco 28 series hygienic impeller pumps, supports use in an approximate 20°C to 90°C temperature range, and carries FDA and 3A certifications.
|
$ 318.64
-
+
| ||
|
1-2 weeks delivery time The Jabsco 890-0000 cover gasket replacement component provides a secure seal that helps prevent leaks and supports equipment integrity during maintenance and repair work. Built for a precise fit and long-lasting performance, it is often used with Jabsco cover 3993 and cover 11831-0000, and it is listed as an alternate to gasket references including Jabsco 890, 11417, VW065.121.290, 065 121 290, 065121290, and 890-0000.
|
$ 16.92
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8963-0002B flexible impeller is built for hygienic pumping of liquids, gels, and pastes, using 3A sanitary food grade EPDM rubber for smooth, steady, gentle output on sensitive media. It features 9 blades, a double flat drive hub with a 1 inch epoxy plastic shaft hub, and measures 4-5/8 inches wide by 3-1/2 inches thick (118 mm diameter, 89 mm depth, 25 mm shaft diameter). Rated for temperatures up to 185°F (approximately 4°C to 120°C range) and intended for medium pressure service, it is commonly used in Jabsco 28 series hygienic impeller pumps (28500-XXXX, 28520-XXXX, 28530-XXXX, 28540-XXXX); regular water flushing is recommended for longevity, especially after pumping corrosive substances.
|
$ 762.37
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8963-0005B neoprene impeller is a food-quality, FDA- and 3A Hygienic-certified replacement component built for reliable water and simple media transfer in marine and industrial pump systems. Its 9-blade design, 118 mm diameter, 89 mm width, and 25 mm shaft diameter support efficient flow in medium-pressure applications, while the double flat hub helps maintain a secure drive connection. Rated for approximately 4°C to 70°C operation and suitable for freshwater and saltwater use, it is a strong choice where long-term durability and hygiene are essential.
|
$ 637.23
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8980-0005B flexible impeller is a high-pressure, food-grade Neoprene rubber component built for sanitary pump duties in food, beverage, and pharmaceutical applications. Its 10-blade design with a double flat drive hub (5/8 inch epoxy plastic) supports smooth, steady, pulsation-free flow while gently handling liquids, gels, and pastes with minimal damage to suspended solids. Certified to FDA and 3A requirements, it offers strong chemical resistance and operates within a stated temperature range of 45°F (7°C) to 165°F (73.9°C).
|
$ 223.36
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8980-0021B neoprene impeller is a high pressure replacement component for flexible impeller pumps, built to handle simple fluids such as water. It supports reliable operation in an approximate temperature range of 4°C to 80°C and is widely used both on board and in industrial pumping applications. With a 57 mm diameter, 32 mm depth, 16 mm shaft diameter, double flat drive hub, 10 blades, and a plastic insert, it delivers consistent pumping performance in demanding service.
|
$ 129.93
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8980-0022B neoprene impeller is a durable replacement component built for efficient oil and water transfer. Its flat drive design and ten-blade geometry help deliver reliable pumping performance, while the 2 1/4 in (57 mm) diameter, 1 1/4 in (32 mm) width, and 5/8 in (16 mm) shaft diameter support dependable fit and operation in demanding applications.
|
$ 241.24
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8980-0023B flexible pump impeller delivers efficient fluid movement with a nitrile rubber construction, a plastic core, and a double flat drive hub. It features a 2-1/4 inch (57 mm) outer diameter, 1-1/4 inch (32 mm) depth, and fits a 5/8 inch (16 mm) shaft, using 10 blades for consistent pumping performance. Suitable for water, oily water, light oils, diesel, and beverages such as beer, wine, whiskey, and cider, it is not recommended for brake fluid, and has a shipping weight of 0.10 kg.
|
$ 199.52
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8981-0002B EPDM impeller is a food-grade, high-performance rotor designed for sanitary pump applications in food processing, beverage, and pharmaceutical systems. FDA-approved EPDM material with 3A certification supports hygienic operation, while the 8-blade design promotes efficient fluid movement and smooth pump performance. A double flat drive with a 16 mm shaft diameter ensures a secure fit, and the 65 mm diameter by 51 mm depth sizing supports proper pump matching. Built with a plastic insert and rated for approximately 4°C to 120°C, it offers strong resistance to wear, chemicals, and corrosion for long-lasting reliability.
|
$ 276.94
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8981-0005B neoprene impeller is a flexible 8-blade replacement component designed for dependable pumping in both fresh and salt water. Its neoprene construction (food approved) and double flat drive hub support reliable operation in applications with minimal oil or diesel exposure, while the specified M profile helps ensure proper fit. Regular replacement (ideally annually) helps maintain consistent performance and extend pump service life across compatible Jabsco pump models.
|
$ 172.76
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8983-0002B impeller is a high-pressure EPDM replacement rotor designed for Jabsco hygienic impeller pump applications, including the 28 series. It supports an approximate operating temperature range from 4°C to 120°C and uses a double flat drive hub for the specified shaft size. Food-approved EPDM material and FDA and 3A certifications help support use in hygiene-focused fluid handling where material compatibility must be verified against the pumped medium.
|
$ 780.20
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8983-0005B neoprene impeller is a durable replacement component built for marine, industrial, and food-grade pump systems, delivering efficient water flow through a 10-blade design. Its double-flat, 2-flat drive hub and 25.4 mm shaft diameter help ensure a secure fit and smooth operation across a 4°C to 70°C temperature range. FDA and 3A certifications support use in food-related applications, and the neoprene construction provides strong wear resistance for long service life in freshwater, saltwater, and simple-fluid pumping duties.
|
$ 472.66
-
+
| ||
|
1-2 weeks delivery time The Jabsco 8984-0005B neoprene impeller is a durable replacement component for impeller pumps used in marine and industrial circulation and transfer of simple media such as water. Its food-approved neoprene construction supports hygienic applications and is backed by FDA and 3A certifications, while the approximately 4°C to 70°C temperature range helps maintain dependable performance across varying operating conditions. Commonly used in Jabsco 28 series hygienic impeller pumps (28500-XXXX, 28520-XXXX, 28530-XXXX, 28540-XXXX), it features a double flat drive hub, 9 blades, and a plastic insert for a secure fit in compatible pump designs.
|
$ 610.46
-
+
| ||
|
1-2 weeks delivery time The Jabsco 90058-0001 maintenance service kit is made for the Jabsco 6050-0001 model and supplies key replacement components to support ongoing system functionality. It includes a seal, an O-ring and gasket, and a neoprene impeller to help maintain efficiency and extend equipment service life through regular replacement.
|
$ 228.05
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.