ID
1076003
$ 2,268.76
1-2 weeks delivery time
-
+
The Jabsco 7420-0004 flexible impeller pedestal mount pump delivers a nominal 62 GPM (235 litres/min) at 1750 rpm for demanding marine duties such as engine cooling and general-purpose liquid transfer. Its bronze construction with a neoprene impeller, full thickness cam, and carbon/ceramic mechanical seal supports dependable operation, while 1-1/4 inch NPT internal vertical ports simplify integration. Self-priming performance, bi-directional pumping capability, and operation at low or high speeds make it a versatile onboard solution when installed with airtight suction lines and run with liquid for lubrication.
- Description
- Ask a Question
-
Jabsco 7420-0004 Flexible Impeller Pedestal Pump Unit
The Jabsco 7420-0004 is a marine pulley-driven flexible impeller pump end built for rugged service in demanding onboard environments. Designed as a bare shafted pedestal pump end only, it combines positive-displacement priming performance with general transfer capability for a wide range of marine pumping tasks.
Application
- Engine cooling
- Washdown
- Circulation
- Bilge pumping
- General-purpose onboard or dockside liquid transfer
Technical Specifications
Catalog Number 7420-0004 Pump Type Pulley Driven Flexible Impeller Pedestal Mount Pump (bare shafted pedestal pump end only) Nominal Flow Rate 235 litres/min (62 gallons/min) at 1750 rpm Port Size 1-1/4 inch NPT internal (vertical port) Pump Body Material Bronze Impeller Material Neoprene Shaft Seal Carbon/Ceramic Mechanical Seal Cam Full Thickness Cam (Full Cam) Shaft Standard Length Shaft Bearing Double Row Ball Bearing Self-Priming (Vertical Dry Suction Lift) 10 feet (3.0 mm as stated); minimum 800 rpm required Suction Lift (When Wetted) Up to 22 feet (6.7 m) Neoprene Impeller Temperature Limits 45°F to 180°F (7°C to 82°C) Maximum Pressure For continuous operation, pressure should not exceed 30 psi Intermittent Service Pressure 35 to 50 psi using 807-1001 high pressure impeller plus an extra gasket
Product Details
- Bronze body and stainless steel shaft construction stated for marine environments
- Primes at low or high speeds (self-priming performance depends on airtight suction lines)
- Pumps either thin or viscous liquids and can handle more solids in suspension than other types of rotary pumps
- Operates at low or high speeds, can be mounted at any angle, and pumps in either direction with equal efficiency
- Pump shaft rotation determines intake and discharge port locations
- Normally assembled at the factory for clockwise rotation (looking at end cover)
- Depends on the liquid pumped for lubrication; do not run dry for more than 30 seconds
- Do not pump gasoline or other flammable liquids
- Neoprene impeller is noted as suitable for water and general-purpose pumping; if there is any oil in the water, use a nitrile impeller (see parts list)
Features
- Mechanical seal
- Self-priming up to 10 feet vertical lift
- Easy to service and maintain
- Will tolerate abrasive wear
- Handles hard and soft solids without clogging
- Can pump in either direction
- Will not airlock
Spare Parts Available
- Major Overhaul Kit / Rebuild Kit: Catalog # 90062-0001, Service Kit, Neoprene, with Neoprene Impeller, O-Ring and Seal
- Impeller: Catalog # 17935-0001, Impeller, Neoprene
- Shaft Seal: Catalog # 6407-0010, Service Kit, Neoprene, with Neoprene Impeller, O-Ring and Seal
-
Popular products
-
1-2 weeks delivery time$ 2,268.76 -
-
-
-
-
-
1-2 weeks delivery time$ 1,445.18 -
-
-
