ID
1349536
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D1631H5011B is a Duplex II diaphragm pump assembly with a 115V AC motor (50/60 Hz) and a 60 PSI pressure switch for demand operation. It uses a polypropylene pump body with an EPDM diaphragm, Santoprene check valve, and a medium-pressure cam. Ports are 3/8 inch NPT female inlet and 3/8 inch NPT female discharge; it is self-priming up to 8 ft (2.4 m), can run dry without damage, has a maximum temperature rating of 140°F, and weighs 5 lb.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump With 115V AC Motor
The Flojet D1631H5011B is a Duplex II series diaphragm pump built for demand-style operation, using an integrated pressure switch to stop the pump when discharge pressure reaches the switch set point and restart when flow is required. It is intended for a wide range of general pumping tasks such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing, and is designed to be installed in a dry, adequately ventilated location.
Technical Specifications
Pump Type Diaphragm pump (Duplex II series) Body Material Polypropylene Diaphragm Material EPDM Check Valve Material Santoprene Cam Medium pressure cam Pressure Switch Setting 60 PSI (switch OFF set point) Motor Voltage 115V AC Frequency 50/60 Hz Self-Priming Up to 8 ft (2.4 m) Run-Dry Capability Can run dry without damage Inlet Port 3/8 inch NPT female Discharge Port 3/8 inch NPT female Maximum Fluid Temperature 140°F Maximum Inlet Pressure 30 PSI (2.1 bar) Weight 5 lb
Features
- Demand-duty operation via an integrated pressure switch
- Pressure switch automatically stops at 60 PSI when the discharge valve is closed and restarts when a valve is opened and line pressure drops
- Pump head can be rotated in 90-degree increments to simplify plumbing
- Designed to pull higher dry vacuum using updated diaphragm and valve design
Product Details
- Typical uses include liquid transfer, spraying, cooling, circulation, filtration, and dispensing
- Demand operation is considered intermittent duty; extended high duty cycles can shorten pump life
- For outdoor mounting, shield the pump from water, dust, sunlight, and wash-down spray
- Use of a minimum 40 mesh strainer or filter on the inlet is recommended
- Do not use to pump flammable fluids (gasoline, kerosene, fuel oil, etc.) and do not use in an explosive environment
-
Popular products
