ID
1349542
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet Duplex II series diaphragm pump assembly is a 115V AC demand-duty unit equipped with a 100 PSI pressure switch and high-pressure cam. It uses a polypropylene pump body with a Viton diaphragm and Santoprene check valve, and it features 3/8 inch John Guest push-fit inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, operates on 50/60 Hz power, has a maximum fluid temperature rating of 140°F, and weighs 5 lbs.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump with 100 PSI Switch
The Flojet D1635F7021 is a Duplex II diaphragm pump built for applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing. It is a demand-duty pump with an integrated pressure switch that automatically stops and restarts the pump based on discharge pressure.
Technical Specifications
Series Duplex II Motor Voltage 115V AC Frequency 50/60 Hz Pressure Switch 100 PSI (shutoff at 100 PSI when discharge valve is closed) Pump Body Material Polypropylene Diaphragm Material Viton Check Valve Material Santoprene Cam Type High-pressure cam Inlet Port 3/8 inch John Guest push fit Discharge Port 3/8 inch John Guest push fit Self-Priming Up to 8 ft (2.4 m) Maximum Fluid Temperature 140°F Weight 5 lbs Maximum Inlet Pressure 30 PSI (2.1 bar) Check Valve Cracking Pressure (If Used in Plumbing) No more than 2 PSI (0.14 bar) Recommended Inlet Strainer Minimum 40 mesh strainer or filter Recommended Tubing Minimum 3/8 inch ID and at least 20 inches long Pump Head Adjustment Pump head can be rotated in 90-degree increments
Features
- Demand operation with automatic shutoff at the pressure switch set point (100 PSI)
- Self-priming up to 8 ft (2.4 m)
- Can run dry without damage
- New diaphragm and valve design intended to pull higher dry vacuum
- 3/8 inch John Guest push-fit ports for inlet and discharge
Product Details
- Intended for intermittent duty cycles; continuous operation is recommended only for short periods of time.
- Mount in a dry, adequately ventilated area; if installed outdoors, shield from water, dust, sunlight, and washdown spray.
- Do not use to pump flammable fluids (including gasoline, kerosene, or fuel oil) and do not use in an explosive environment.
-
Popular products
-
-
-
-
-
-
-
-
1-2 weeks delivery time -
-
