Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Whale SB4222 side entry strum box is a plastic bilge strainer assembly for flat or deep bilge applications, designed for 25mm (1 inch) and 38mm (1-1/2 inch) bilge pump hoses. It incorporates an integral non-return valve to prevent backflow and uses a detachable wicket/removable strainer plate for easier cleaning. Dimensions are 170mm (L) x 120mm (W) x 58mm (D), and it is manufactured in the United Kingdom. |
$ 49.44
-
+
|
|
1-2 weeks delivery time The Whale SB5865 strainer valve is a black plastic bilge suction strainer for flat or deep bilge installations, designed to help prevent the suction of solids. It includes a built-in non-return (check) valve to prevent water backflow and a detachable wicket/removable strainer plate for easier cleaning and maintenance, with vertical connection options for 1 inch (25 mm) and 1-1/2 inch (38 mm) hose sizes. |
$ 49.44
-
+
|
|
1-2 weeks delivery time The Whale SG1984B intelligent shower gulley is a compact marine shower sink with integrated control that automatically signals the Gulper IC pump when water needs to be pumped out, helping prevent the pump from running dry. It features fully potted circuitry protected against water ingress, an easy-clean cover, and a 4 m cable. Identifiers listed include article number 17540360, item number 038020, and manufacturer number SG1984B. |
$ 158.78
-
+
|
|
1-2 weeks delivery time The Whale SG1992B large Gulley shower drain with integrated intelligent control detects water and signals the Gulper IC pump to run, helping prevent dry running and removing the need for a greywater tank. It uses a 5V DC supply at 6 mA, includes a three-valve non-return valve, and supports a maximum flow rate of 18 litres per minute. Dimensions are 280 x 180 x 100 mm with a 180 mm diameter, and it is specified for Bavaria Yachts and suitable for shower trays with large drain openings. |
$ 151.78
-
+
|
|
1-2 weeks delivery time The Whale SG3482B Gulley IC grey waste water outlet is a compact shower gulley with built-in intelligent control electronics that electronically signal a Whale Gulper IC diaphragm pump when pumping is required, helping prevent the pump from running dry. It includes a 2-metre pre-wired cable, has an 82 mm outer diameter, a 90-degree angle, and is compatible with 19 mm and 25 mm hoses (3/4 inch and 1 inch inside diameter). |
$ 127.20
-
+
|
|
1-2 weeks delivery time The Whale SG3484B intelligent shower gulley outlet for grey waste water signals the Whale Gulper IC diaphragm pump when water needs to be pumped out to help prevent the pump from running dry. It includes a 4 m pre-wired cable, fits 19 mm and 25 mm (3/4 inch and 1 inch) hose ID, and features an 82 mm diameter body with a 90-degree angle design. |
$ 131.47
-
+
|
|
1-2 weeks delivery time The Whale SG8284 Gulley IC grey waste kit is a 12V DC system for managing shower grey water using a Gulper IC electric waste pump and a Compact Gulley IC with sensor in a pre-wired plug-and-play setup. It provides automatic control by sensing grey water level, is self-priming and can run dry, includes soft start protection, and is rated up to 19 LPM flow. The kit is listed with ISO8846 compliance and CE marking, 10A fuse, 19mm (3/4 inch) and 25mm (1 inch) hose connections, and a 4m cable (kit). |
$ 874.01
-
+
|
|
1-2 weeks delivery time The Whale SG8484 shower drain and waste water pump kit is a 24V DC Gulley IC and Gulper IC solution for gray water/shower sump disposal. It is supplied as a pre-wired plug-and-play kit with soft start, a 4 m cable, and automatic sensor switching to run the pump on contact with water and stop after draining. It supports 19 mm (3/4 inch) and 25 mm (1 inch) hose connections, is self-priming up to 3 m, can run dry, and conforms to ISO8846 (CE certified). |
$ 892.76
-
+
|
|
1-2 weeks delivery time The Whale SI3424B strum box strainer assembly for bilge IC pump systems combines a strainer, non-return valve, and automatic level switch with Intelligent Control Technology for automatic bilge water level management. It is made of plastic, uses 19 mm (3/4 inch) hose ports, and is compatible with Whale Bilge IC and Whale Gulper IC 12V or 24V pumps. Supplied with a 4 m (12 ft) cable; article number 17540369. |
$ 130.35
-
+
|
|
1-2 weeks delivery time The Whale SI8284 remote-mounted electric bilge system is a 12V DC unit with intelligent control electronics that automatically signals the pump when water needs to be pumped out. It is pre-wired and assembled and includes a three-in-one strainer, non-return valve, and electronic control switch, plus an integrated non-choke valve. The system is self-priming (up to 3 m) and dry-running capable, delivers 1140 LPH (19 LPM), supports 19 mm (3/4 inch) and 25 mm (1 inch) hose sizes, and is rated up to 8A with a 10A fuse; it conforms to ISO8846, ISO8849, and ISO15083 and includes a 3-year warranty. |
$ 711.23
-
+
|
|
1-2 weeks delivery time The Whale SI8484 bilge pumping assembly is a 24V DC remote-mounted diaphragm unit with built-in intelligent control electronics for automatic on/off operation when water needs to be pumped out. It is supplied pre-wired and assembled with an easy-to-clean small strainer and a three-in-one design combining strainer, non-return valve, and electronic control switch. Key data includes 1140 LPH (19 LPM) flow, 2 m cable, 5A fuse, IP68 7-way quick connect, 19 mm (3/4 inch) and 25 mm (1 inch) hose sizes, and a maximum combined head and lift of 4 m; it conforms to ISO8846, ISO8849, and ISO15083 and includes a 3-year warranty. |
$ 727.57
-
+
|
|
1-2 weeks delivery time The Whale SK8813 service repair kit is a maintenance component set for Whale Gusher 8 Mk3 pumps (hand bilge pump). The kit includes 2 O-rings, 2 check valves (inlet and outlet flaps), and 1 neoprene diaphragm; item number 17540380, country of origin United Kingdom, shipping weight 0.30 kg. |
$ 53.58
-
+
|
|
1-2 weeks delivery time The Whale Supersub 1100 submersible bilge pump is a 12V DC electric unit for small bilges and confined spaces, with integrated venting and adjustable/rotatable ports for flexible installation and easier maintenance. It delivers up to 66 LPM (3,960 LPH / 1050 GPH) and 47 LPM (2,820 LPH / 750 GPH) at 1 m head, draws up to 4.3A (5A fuse), and requires a separate bilge switch. Hose compatibility is 25 mm (1 inch) or 28 mm (1-1/8 inch), and the pump includes a low-profile strainer, snap-fit assembly, and 3-year warranty. |
$ 92.64
-
+
|
|
1-2 weeks delivery time The Whale Supersub 1100 submersible bilge pump is a 24V DC unit for small bilges and tight spaces, with integrated venting to help prevent air in the system and adjustable/rotatable ports for easier installation and servicing. It is rated at 66 L/min (3960 LPH / 1050 US GPH without back pressure) and delivers 47 L/min (2820 LPH / 750 US GPH) at 1 m head. This pump is not automatic and is intended to be controlled by a separate bilge switch; it supports 25 mm (1 inch) or 28 mm (1-1/8 inch) hose connections, draws up to 2.2 A (2.5 A fuse), and includes a 3-year warranty. |
$ 98.41
-
+
|
|
1-2 weeks delivery time The Supersub Smart automatic submersible bilge pump is a 12V DC unit designed for efficient water removal in fresh and saltwater environments, operating automatically without a separate float switch via an integrated electric field sensor. It delivers up to 66 L/min (3960 LPH / 1050 US GPH) and is listed at 47 L/min (2820 LPH / 750 US GPH) at 1 m head, with a built-in non-return valve, low-profile design, and rotatable strainer/outlet for flexible installation. Supplied cable length is listed as 1 m, and hose outlet options include 25 mm (1 inch) or 28 mm (1-1/8 inch). |
$ 205.56
-
+
|
|
1-2 weeks delivery time The Whale SS1224 SuperSub Smart automatic submersible bilge pump is a 24V DC unit designed to start and stop automatically using electric field sensor technology, eliminating the need for a separate float switch. It includes a built-in non-return valve, integrated solid state switching with no moving parts, and is suitable for fresh and saltwater use in leisure craft bilges. Stated performance includes 3960 L/h (66 L/min) and 2820 L/h (47 L/min) at 1 m head, with hose connection options of 25 mm (1 inch) or 28 mm (1-1/8 inch), and current draw listed as up to 2.2 A. |
$ 211.44
-
+
|
|
1-2 weeks delivery time The Whale SuperSub 500 submersible bilge pump is a slim, low-profile 12V DC unit for tight bilge spaces and installation under engines. It delivers up to 32 L/min (1892 LPH / 500 US GPH), uses a 19 mm (3/4 inch) hose connection, and is intended to run with a separate bilge switch (not included). The pump draws up to 2.4A (5A fuse) and is listed with dimensions including 54 mm height, 183 mm width, and 75 mm depth, with a 3-year warranty and marine-standard certifications. |
$ 57.48
-
+
|
|
1-2 weeks delivery time The Whale SS5212 automatic submersible bilge pump is a 12V DC water-removal unit for fresh or salt water with up to 2460 LPH (41 LPM / 650 US GPH) output. It uses Electric Field Sensor Technology / an integrated solid state switch for automatic start/stop without a separate float switch, and includes a built-in non-return valve. The pump supports a 19 mm (3/4 inch) hose connection (also listed with an optional 25 mm (1 inch) connection), has a 1 m cable, 5A fuse requirement, and typical current draw of 3A at 12V (3.4A at 13.6V). |
$ 103.16
-
+
|
What are the primary uses of a Whale Bilge Pump and Pressure Pumps in marine applications?
Whale bilge pumps, such as the Whale Gusher and Whale Supersub, are primarily used in marine applications to remove excess water from the bilge, ensuring the boat remains buoyant and safe. These pumps, including manual models like the Whale Gusher Titan Manual and electric options like the Whale Gulper 320 High Capacity, are essential for preventing water accumulation that can lead to instability or damage. Additionally, Whale Marine offers a range of replacement parts and pump service kits to maintain the efficiency and longevity of these vital systems, supporting various marine needs from sanitation to groundwater purging.
Whale water pumps also include specialized options like the Supersub bilge pump, Super Purger, and sanitation pumps designed for various marine applications. The Whale Quick Connect system and 12-volt automatic bilge pumps, such as the Whale Gulper Grouper MK 3, ensure reliable operation. Models like the MK 3 Manual and Whale Supersub Smart are designed for specific tasks like fishbox discharge and toilet pumping. The Whale Gusher 10 Manual and Whale Watermaster Automatic Pressure Pump are ideal for more demanding tasks, with the Gusher Galley and Titan Manual Pump making outdoor living easy and enjoyable. Whale's low voltage pumps, such as the Whale Orca, Whale Flipper, and Whale V pumps, offer versatile solutions for boats and RVs. With systems designed for easy maintenance and a wide range of applications, Whale pumps like the Gusher Galley MK 3 and electric field sensor models ensure optimal performance. Whale service kits and replacement parts, such as the Whale BP0510 MK5 Universal and AK4615 Babyfoot® Service Kit, support long-term use and reliability.
How does the Whale Foot Pump, MK3 Manual Pump and MK5 Universal Manual Pump operate in a boat's galley
The Whale foot pump operates in a boat's galley by providing a manual method to draw water from a tank to the sink, ensuring reliable water flow without the need for electricity. This type of galley pump, like the Whale Gusher urchin manual, is especially useful for boats without pressure pumps or when conserving battery power. The foot pump's simple design and durability make it an excellent choice for maintaining water and heating systems, enhancing convenience and functionality in the galley.
Additionally, the Whale foot pump's efficient design allows it to be used alongside other Whale water systems, such as the Whale Supersub bilge pump, Super Purger, and sanitation pumps, ensuring a cohesive and reliable water management system. The Whale Quick Connect system further simplifies installation and maintenance, while the low voltage and manual operation make it an energy-efficient option. With products like the Whale BP0510 MK5 Universal service kit and the Whale Gusher 10 MK3 manual bilge pump, maintaining the foot pump and other Whale systems is straightforward and hassle-free, making them ideal for both small boats and larger vessels.
What are the main applications of the Whale Gusher 10 Water Pump on boats?
The main applications of the Whale Gusher water pump on boats include bilge pumping, waste management, and freshwater transfer. The Whale Gusher pumps, such as the Gusher 10 and Gusher urchin manual bilge pumps, are highly reliable for removing water from the bilge area, ensuring the safety and stability of the vessel. Additionally, the Whale Gulper Grouper pumps are specifically designed for handling waste discharge, while the MK5 universal manual pump is versatile for various onboard water management tasks. These pumps are essential components in a pump kit for maintaining effective water and waste systems on boats.
Furthermore, Whale Gusher pumps, including the 12 volt fishbox discharge pump and Whale Gulper toilet pump, provide solutions for various specific needs on a boat. The MK3 Gusher Titan manual pump and Whale GP0550 electric bilge pump enhance functionality, ensuring that the vessel's water systems operate smoothly. Whale makes outdoor living easy with products like the Super Purge and Accumulator pump, offering reliable performance in different applications. Quick Connect plumbing and service kits, such as the MK3 manual and MK5 manual pumps, facilitate maintenance and integration of water systems designed for mobile applications, ensuring an enjoyable boating experience. Whether for shower and sink water management or waste discharge with the Gulper 220 shower pump, Whale pumps, like the Gusher Galley MK2, provide versatile and dependable solutions.