VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus EHPRSET08 coupling set is a three-piece compression fitting kit supplied with olives and support sleeves for connecting VETUS EHPR series electro-hydraulic pumps (EHPA, EHPB, EHPC) to Vetus HS04N 6x8mm nylon tubing. It is intended to provide a secure hydraulic connection between the pump assembly and the specified tubing size. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M213A402A diesel propulsion package integrates a Mitsubishi M2.13 marine diesel engine with a TMC40 gearbox configured for i=2.0 reduction and a straight outlet. Rated at 12PS / 8.8KW at 3,000 rpm, the engine is a 2-cylinder 635cm³ unit with a 2-circuit cooling system and a 12V electrical system. Supplied as a package with an MP10B12 panel, a Technodrive TMC40P gearbox, four flexible engine mounts (type KSTEUN25V), and a pre-installed oil suction pump, and it includes a water-cooled aluminum engine cover intended to reduce engine compartment temperatures and contribute to reduced engine noise. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M218A402A marine diesel propulsion package integrates a Mitsubishi M2.18 2-cylinder engine with a Technodrive TMC40P gearbox (reduction i=2.0, straight outlet). Rated output is 16PS / 11.8KW at 3600 rpm with a displacement of 635cm³, and the unit is specified with 2-circuit cooling and a 12V electrical system. Supplied equipment includes an MP10B12 instrument panel, four flexible engine mounts (type KSTEUN35V), a pre-installed oil suction pump, and a water-cooled aluminum engine cover intended to reduce engine compartment temperature by up to 15°C while contributing to noise suppression. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M218A405A marine diesel engine package is based on the Mitsubishi M2.18 and is specified with a Technodrive TMC40P gearbox featuring a straight outlet and a 2.6 reduction ratio. Rated at 16PS / 11.8KW at 3600 rpm, it is a 2-cylinder, 635cm³ unit with a 2-circuit cooling arrangement and a 12V electrical system, and it is supplied with an MP10B12 instrument panel, four flexible engine mounts (type KSTEUN35V), and a pre-installed oil suction pump. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M329A402A marine diesel engine package combines a Mitsubishi M3.29 3-cylinder (952 cm³) power unit rated at 27.2 HP / 20 kW at 3,600 rpm with a Technodrive TMC40P gearbox (straight outlet) and 2.0 reduction ratio. The configuration includes 2-circuit cooling, a 12 V electric system with MP22BS12 panel, and is supplied with the standard instrument panel MPA22KBS2, four flexible engine mounts type KSTEUN40V, and a pre-installed oil suction pump. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M445A602A marine diesel engine package (Mitsubishi M4.45 with TMC60 i=2.0) is a 4-cylinder, 4-stroke propulsion engine rated at 42 PS / 30.9 kW at 3,000 rpm with 1,758 cm³ displacement. It specifies 98 Nm maximum torque at 3,200 rpm, a 78 x 92 mm bore x stroke, swirl/prechamber combustion, and a heat exchanger cooling arrangement described as a 2-circuit cooling system. The engine operates on a 12V electric system (alternator 12V/110A) and is listed with a maximum installation angle of 15°, weight with gearbox of 185 kg, and service connections including 50 mm exhaust diameter, 20 mm cooling water inlet, and 8 mm diesel inlet/return; engine mounts (KSTEUN75) and dashboard (MP22BS12A) are included. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus M456A605A propulsion engine and gearbox package combines a Mitsubishi M4.56 turbocharged four-cylinder engine (1758 cm³) with a Technodrive TMC60E gearbox with straight outlet and 2.45:1 reduction. Rated at 38.3 kW (52 hp) at 3,000 rpm, it is specified with a 2-circuit cooling system and a 12V electrical system with MP22 panel. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus SA25/1500 propeller shaft assembly is a fully machined 25 mm stainless steel screw shaft with a 1500 mm length, manufactured from duplex stainless steel 1-4462 Niro for marine corrosion resistance. It conforms to ISO 4566 and is machined with a 1:10 taper and keyway on one end; supply includes a matching key, tab washer, and a propeller nut with integrated zinc anode, plus a cap nut complete with a zinc anode. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus SA30/2500 propeller shaft assembly is a Duplex 1-4462 (Niro) stainless steel screw shaft supplied with a cap nut/end nut incorporating an integrated zinc anode for corrosion protection in marine propulsion systems. It is manufactured with meticulous machining, conforms to ISO 4566 for taper and key dimensions, and is specified at 2500 mm length with a 30 mm shaft diameter. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus OPS0752 oil pressure monitoring switch is a double pole unit for 12/24V electrical systems, specified with a 0.75 bar pressure rating and an M10 x 1K threaded connection. Intended for marine applications, it is used to monitor engine oil pressure to support safe operation where oil pressure fluctuation protection is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B12X10L propeller assembly is a 3-bladed, left-handed manganese bronze marine propeller with a 12-inch diameter and 10-inch pitch. It is specified with a disk area ratio (Fa/F) of 0.52 and is designed for a 25 mm shaft hole diameter with a 1:10 taper for vessel propulsion applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B12X9R propeller unit is a 3-bladed manganese bronze marine propeller with a 12-inch diameter and 9-inch pitch, configured for right-handed rotation. It is specified with a disk area ratio (Fa/F) of 0.52 and is machined for 25 mm shafts with a 1:10 taper. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B16X11R propeller unit is a 3-bladed, right-handed marine propulsion component manufactured from manganese bronze with a 16-inch diameter and 11-inch pitch. It is specified with a disk area ratio (Fa/F) of 0.52 and is machined for a 30 mm shaft hole diameter with a 1:10 taper to support compatibility and installation on appropriate propeller shafts. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B17X12R propeller unit is a 3-bladed, right-handed marine propulsion component manufactured from manganese bronze with a 17-inch diameter and 12-inch pitch. It features a blade area ratio (Fa/F) of 0.52 and is specified for a 30 mm shaft diameter with a 1:10 taper cone for secure installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B18X14R propeller assembly is a 3-bladed manganese bronze marine propeller with an 18 inch diameter and 14 inch pitch, configured for right-handed rotation. It features a blade surface area ratio (Fa/F) of 0.52 and is specified for 30 mm shafts with a 1:10 taper for secure fitment and reliable propulsion performance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B18X15L propeller assembly is a 3-bladed manganese bronze marine propeller specified at 18-inch diameter and 15-inch pitch for left-handed rotation. It has a blade surface area ratio (Fa/F) of 0.52 and is machined for a 30 mm shaft hole with a 1:10 taper for installation on compatible propeller shafts. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3B19X18L three-blade propeller unit is a manganese bronze ship propeller specified at 19-inch diameter and 18-inch pitch for left-hand rotation. It is manufactured with a blade surface area ratio (Fa/F) of 0.52 and is machined for a 35 mm shaft with a 1:10 taper to support secure fitment and stable propulsion duty on marine vessels. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P3C16X12R propeller assembly is a 3-bladed P3C series marine propulsion component with a 16 inch diameter and 12 inch pitch, specified for right-handed (clockwise) rotation. It is manufactured from manganese bronze and features a blade area ratio (Fa/F) of 0.55. The hub is supplied with a 30 mm bore and a 1:10 taper. |
Our managers will contact you and clarify the terms of the order
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.