VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STAFIN03A fin set is a two-piece stainless steel stabilizer fin assembly for hydraulic stabilizers, specified with a fin size of 0.3 m². Intended for motor yachts exceeding 10 meters in length, these fins are used to reduce rolling movement in adverse sea conditions such as heavy swells and challenging weather. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus MPA22BS25 engine instrument panel assembly is a 12V MPA22 dashboard panel with two instruments including a rev counter scaled 0–5000 rpm, supplied with an ignition lock, hour meter, voltmeter, and integrated LED and acoustic warning signals. The panel is manufactured from seawater-resistant aluminium with a black-coated, weatherproof finish, is rated IP64 splash-proof/waterproof, and uses connectors stated as compatible with older VETUS panels; gaskets and mounting screws are included for installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus HT3064 connection sealing set is a precision-engineered sealing component set intended to provide reliable sealing of hydraulic connections on the BOW230 HM. It is supplied to maintain connection integrity, support leak prevention, and simplify installation for hydraulic system service in marine and industrial applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus BL30/1500 stern tube assembly is a bronze water-lubricated stern gear component for GRP or wooden vessels, supplied with an outer cutlass bearing aft and an integrated rear mounting flange for installation. It is specified for a 30 mm propeller shaft diameter and has a tube length of 1500 mm. The tube includes slots intended to simplify cutlass bearing replacement, and water lubrication can be arranged either via an optional G3/8” water scoop kit (WCAPS) or by tapping water from the main engine’s raw water-cooling circuit using the ZWBKIT (T-piece 18-10-18 mm, 3 m of 10 mm hose DWHOSE10A, and four hose clamps). |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus PWS31A2 porthole assembly (PWS31) is a stainless steel marine porthole specified as Category A2 with a Ø198 mm cut-out and suitability for wall thicknesses from 3 to 18 mm. The design is supplied in two stated configurations: an internal stainless steel frame with 8 mm “smoke” acrylic glass intended for installation according to CE AI standards, and a frameless configuration with 10 mm “smoke” acrylic glass intended for installation according to CE AIII requirements. The unit includes an anodized aluminum frame, 1 hinge, 2 handles, and provision for mosquito screen HOR31S, with an external dimension A of 220 mm. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus PZ663 aluminium porthole unit is intended for marine and outdoor installation and is specified to Category A3 performance standards. It is manufactured from aluminium for durability and is described as a functional porthole solution for boats, yachts, and vessels. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus HT5037 pressure control unit is a hydraulic pressure management component intended to maintain controlled operating pressure in marine hydraulic systems. It is described as providing precision pressure control, durable construction for demanding marine environments, and seamless integration with existing hydraulic system arrangements. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus AFSTPB push-button control component is intended for remote control applications on marine systems, providing a user-interface device for operating functions remotely. This unit is supplied as a push button only and explicitly excludes a relay, focusing on straightforward operation and reliable construction. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus EHPD12R hydraulic pump unit is a 12 V electric, gear-type pumping assembly for light-duty pleasure craft installations. It is specified with integrated non-return valves, does not include a by-pass valve, and is rated for a flow of 1400 cm³/min for onboard hydraulic operation where a compact electric pump is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus EHPD24R electro-hydraulic pump unit is a 24 V gear-type pump for light-duty pleasure craft, built with integrated non-return valves for dependable hydraulic operation. It is specified with a flow capacity of 1425 cm³/min (also referenced as 1400 cc/min), a normal pressure rating of 70 bar, and a current consumption of 9 A. The assembly incorporates a 0.95 litre reservoir and has overall dimensions of 314 x 138 x 148 mm for installation where space is limited, supporting steering and other onboard hydraulic functions. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus MP00GEN remote control panel unit (MP00G) is intended for generator installations, providing an interface for remote operation of generator functions and for monitoring generator performance from a distance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus HT5146 filtration element is a hydraulic system filter intended for use with the HT1010 hydraulic tank. It provides an efficient filtration mechanism to remove contaminants from the hydraulic circuit, supporting smooth operation and helping reduce maintenance requirements, with installation and servicing described as straightforward. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus GLX14SIC generator set in a soundproof housing is rated at 14kVA with single-phase 230V, 50 Hz output and a stated operating speed of 1500 rpm. It is specified with IP55 protection, maximum voltage variance of ±2%, and installation limits of 15° fore and aft and 25° athwartships; dimensions are 1012 x 587 x 641 mm including the sound hood, with stated maximum ambient temperature of 40°C and maximum raw water temperature of 30°C, and a GLX noise level of 57 dB(A) when installed with the soundproof box. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus GLX14TIC generator set is a complete 14 kVA power generation unit providing 3-phase 400 V output at 50 Hz, supplied with a sound hood for reduced noise operation. It is specified with a maximum speed of 1500 RPM, uses the Vetus engine model M4.45, and has IP55 protection with a stated maximum voltage variance of ±2% and an overall weight of 395 kg. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus GLX6,5SIC generator set with sound hood is a complete marine power generation unit from the VETUS GX range, which spans 6 kVA to 20 kVA and is available for 50 or 60 Hertz outputs. It is specified with maximum voltage variance of ±2%, IP55 protection, and a maximum ambient temperature of 40°C; the supplied sound-proof box provides a stated noise level of 57 dB(A). Additional limits include maximum raw water temperature of 30°C and maximum continuous inclination angles of 15° fore and aft and 25° athwartships. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus BG30/1000 stern tube assembly is a glassfibre reinforced polyester (GRP) shaft support component for marine propulsion installations, supplied with an integrated cutlass bearing. It is specified for 30 mm diameter propeller shafts and is stated with a tube length of 1081.5 mm, intended for water-lubricated propeller shaft assemblies requiring a GRP stern tube of this specification. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus BG35/1000 GRP stern tube assembly is a polyester (G.R.P.) tube intended for water-lubricated propeller shaft installations, specified with a 35 mm diameter and a stated length of 1081.5 mm (product designation lists L=1000 mm). Supplied with a cutlass bearing for shaft support, it is intended to be directly bonded into the hull as part of a marine propulsion shaft line. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus BG35/2000 GRP stern tube unit is a polyester stern tube for a water-lubricated propeller shaft assembly, supplied with an integrated cutlass bearing. It is specified with a Ø35 mm diameter and a stated length of 2081.5 mm, and it must be directly bonded into the hull for installation. |
Our managers will contact you and clarify the terms of the order
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.