Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 610D0201 fuel filter cartridge is a replacement filter element used in the fuel system on BUKH DV-series engines, supporting clean fuel delivery to the injection equipment for steady, reliable running. It fits DV10ME engines from engine number 207292 and DV20ME engines from engine number 104271, and is also used across DV18ME, DV24, DV29, DV32, DV36, DV48, DV24RME, and DV29RME applications in fuel filter and fuel injection system assemblies. |
$ 46.53
-
+
|
|
1-2 weeks delivery time The Bukh 610E0502 rubber cap is a protective sealing component for the heat exchanger, helping keep the cooling circuit properly covered and safeguarded in marine engine installations. Designed as an OEM-style replacement, it supports a secure closure to reduce exposure to spray, dirt, and vibration-related loosening around the heat exchanger assembly. |
$ 188.81
-
+
|
|
1-2 weeks delivery time The Bukh 610G0076 water pump comb is a 6-hole comb component for the DV10 water pump assembly on BUKH DV10 marine diesel engines. Designed for OEM-style fit, it supports correct internal arrangement within the pump to help maintain dependable cooling-water circulation in marine operation. |
$ 145.44
-
+
|
|
1-2 weeks delivery time The Bukh 610G0100 4-hole water pump with a plain bearing is a dependable replacement pump for marine engine cooling-water circulation. Designed in a 4-bolt mounting format, it supports steady water flow through the cooling circuit to help maintain stable operating temperatures in BUKH installations that use this pump design. |
$ 676.44
-
+
|
|
1-2 weeks delivery time The Bukh pump cover gasket is intended for marine engine pump sealing applications. |
$ 13.50
-
+
|
|
1-2 weeks delivery time The Bukh 610G0251 comb element (3.1 mm) is designed for use with a two-circuit disc on BUKH DV36 and DV48 marine diesel engines. Used within the disc assembly, it supports accurate setup and consistent operation, making it a practical OEM-grade replacement part for servicing and maintaining drivetrain-related components. |
$ 119.02
-
+
|
|
1-2 weeks delivery time The Bukh 610G0502 lid is a replacement cover component designed to close and protect a Bukh marine assembly. By providing a secure barrier over the opening it serves, it helps keep internal parts shielded from splash, dirt, and general engine-room contaminants for dependable day-to-day operation. |
$ 85.18
-
+
|
|
1-2 weeks delivery time The Bukh 610G0503 water pump cover sealing element is designed for the water pump on BUKH DV36 marine diesel engines, helping maintain a tight, leak-resistant joint at the pump cover. It supports stable cooling-water circulation by keeping the pump housing properly sealed during operation and service intervals. |
$ 6.44
-
+
|
|
1-2 weeks delivery time The Bukh 610G0510 shaft seal is a dedicated sealing component for Bukh shaft applications, designed to help keep fluids contained where a rotating shaft passes through a housing. Installed as part of a shaft sealing point, it supports clean operation by reducing the risk of leakage and protecting surrounding components during marine service. |
$ 292.49
-
+
|
|
1-2 weeks delivery time The Bukh 610J0050 lubricating oil filter element helps keep the engine oil system clean on BUKH DV-series marine diesel engines, supporting dependable lubrication where the camshaft and lubricating oil pump rely on steady oil flow. Designed for DV10, DV18, DV20, DV24, DV29, DV29RME, and DV32 applications, it captures contaminants in the lubricating circuit to protect critical internal components during continuous marine operation. |
$ 27.23
-
+
|
|
1-2 weeks delivery time The Bukh 610J0200 oil filter element supports clean, stable lubrication for BUKH DV36 and DV48 marine diesel engines. Used in the injection pump and oil cooler assembly, it helps trap contaminants from the oil circuit to protect precision components, promote dependable oil flow, and support consistent engine performance underway. |
$ 41.99
-
+
|
|
1-2 weeks delivery time The Bukh 611L0101 intermediate flange gasket is a sealing element used in the air inlet and turbocharger assembly on BUKH DV32 and BUKH DV48 marine diesel engines. Designed to seal the intermediate flange joint, it helps maintain a tight connection to support stable turbocharger system operation and reduce the risk of leakage at the flange interface. |
$ 27.44
-
+
|
|
1-2 weeks delivery time The Bukh 611L0102 turbocharger intake gasket provides a secure seal in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. Designed to help maintain correct airflow and boost integrity, it supports clean, stable engine operation by reducing the risk of air leaks at the turbocharger intake connection. |
$ 14.56
-
+
|
|
1-2 weeks delivery time The Bukh 611L0150 turbocharger unit is a new replacement component for BUKH DV32 and DV48 marine diesel engines from 2020 onward, installed within the air inlet and turbocharger assembly. It compresses intake air to support strong combustion, helping the engine deliver responsive power and efficient operation under load. |
$ 3,333.36
-
+
|
|
1-2 weeks delivery time The Bukh 611Z0270 complete cold start pilot system with attachments supports reliable starting performance on BUKH RME marine diesel engines. Supplied as a complete cold-start system, it helps provide the correct start-assist function for dependable ignition and smoother cold-weather start-up behavior. |
$ 1,765.68
-
+
|
|
1-2 weeks delivery time The Bukh 612A1650 12V starter motor (1.2 kW) provides dependable electric cranking performance for BUKH DV-series marine diesel engines, supporting fast, confident starts in demanding onboard conditions. Used in the electric start system and on configurations with injection pump and oil cooler assemblies, this unit is referenced as #11131285500 for straightforward service matching. |
$ 1,153.81
-
+
|
|
1-2 weeks delivery time The Bukh 612H0570 charging alternator with a double charging diode supports stable battery charging and reliable electrical power generation across BUKH DV and EPA marine engines. Built for electric-start installations and charging duty, it helps maintain dependable starting performance and consistent onboard electrical supply, including 14 V charging applications on DV36 and DV48 setups. |
$ 1,616.13
-
+
|
|
1-2 weeks delivery time The Bukh 612M0010 spring starter unit provides a dependable manual starting solution for BUKH EPA28 marine diesel engines. Installed on the flywheel housing, it stores mechanical energy in a spring mechanism to crank the engine for reliable start-up support in marine service. |
$ 7,255.62
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.