Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 600-80490 thermostat gasket provides a secure seal in the thermostat area of the header tank assembly on BUKH EPA48 marine engines. Designed as an OEM-fit sealing element, it helps prevent coolant leaks and supports stable temperature control by keeping the thermostat housing properly sealed during operation. |
$ 32.67
-
+
|
|
1-2 weeks delivery time The Bukh 600-80870 fuel lift pump supplies consistent low-pressure fuel flow for BUKH EPA48 marine diesel engines. Installed in the fuel supply circuit at the fuel connections, it helps ensure reliable fuel delivery to the engine’s fuel system for smooth starting and stable operation underway. |
$ 1,324.27
-
+
|
|
1-2 weeks delivery time The Bukh 600-91801 threaded fuel pipe clamp is a securing hardware component for the fuel connections on BUKH EPA28, EPA36, and EPA48 marine diesel engines. It supports safe, stable routing of the fuel pipe by clamping it in position and helping reduce movement from vibration, keeping the fuel-line installation tidy and dependable. |
$ 34.59
-
+
|
|
1-2 weeks delivery time The Bukh 600-91802 fuel line clamp is a no-thread securing clamp used in the fuel connections assembly on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed to hold pipe 2 firmly in place, it supports clean routing and stable fuel line retention to help reduce movement and vibration in the fuel system. |
$ 27.67
-
+
|
|
1-2 weeks delivery time The Bukh 600-91803 fuel clamp screw and washer set secures fuel line clamp points in the fuel connections assembly on BUKH EPA28, EPA36, and EPA48 marine engines. Designed to hold fuel pipework firmly in place, it helps maintain tidy routing and dependable retention in vibration-prone engine-room conditions. |
$ 6.92
-
+
|
|
1-2 weeks delivery time The Bukh 600-96300 long dipstick is a Super5 header tank level-check component for BUKH EPA28 and EPA36 marine diesel engines. Designed to fit the header tank assembly, it enables quick, accurate fluid level verification during routine engine-room inspections, helping maintain stable cooling-system operation underway. |
$ 208.85
-
+
|
|
1-2 weeks delivery time The Bukh 600-96310 extended dipstick guide hose is a long dipstick routing component used with the header tank arrangement on BUKH EPA28 and EPA36 marine diesel engines. It guides and protects the dipstick path for smoother oil-level checks, helping keep service access practical in tight engine-room installations while maintaining an OEM-correct fit. |
$ 746.79
-
+
|
|
1-2 weeks delivery time The Bukh 610A1000 injection pump is a precision fuel-metering component for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel system group covering the fuel filter, fuel injection pump, fuel lift pump, and fuel piping, it delivers accurately timed, high-pressure fuel supply to support clean combustion, dependable starting, and stable engine performance. |
$ 1,912.32
-
+
|
|
1-2 weeks delivery time The Bukh 610A1007 sealing washer is a precision sealing element sized 9.6 x 13 x 0.5 mm, designed to help prevent leaks where a secure, tight joint is required in BUKH marine engine and equipment assemblies. It cross-references to part number 620A0604, making it a practical choice for service replacements where maintaining fluid-tight connections is essential. |
$ 9.48
-
+
|
|
1-2 weeks delivery time The Bukh 610A3000 fuel injection pump unit is built for precise diesel fuel delivery on BUKH DV36 marine engines, supporting smooth starting and stable running under load. Installed within the injection pump and oil cooler assembly area, it supplies the high-pressure fuel flow needed for consistent combustion and dependable propulsion performance. |
$ 5,934.34
-
+
|
|
1-2 weeks delivery time The Bukh 610A3089 12V single-pole stop solenoid provides dependable engine shut-down control on BUKH DV36 and DV48 marine diesels. Fitted within the injection pump and oil cooler assembly, this stop magnet actuates the stop function when energized, supporting safe, responsive stopping and reliable operation in marine service. |
$ 917.45
-
+
|
|
1-2 weeks delivery time The Bukh 610A3091 hollow banjo bolt is a return-line fastener used on the injection pump and oil cooler installations for BUKH DV36 and DV48 marine diesel engines. Designed to secure a banjo fitting while allowing internal fluid flow through the bolt, it helps keep the fuel and oil line connections tight, correctly routed, and reliable in marine service. |
$ 68.74
-
+
|
|
1-2 weeks delivery time The Bukh 610A3300 electric pump is a dedicated E-pump used within the fuel injection pump system on BUKH DV36 and DV48 marine diesel engines. Designed for OEM-style fit and dependable operation, it supports stable fuel delivery within the injection pump assembly areas, including installations associated with the oil cooler and the air inlet and turbocharger groups on DV48 setups. |
$ 5,934.34
-
+
|
|
1-2 weeks delivery time The Bukh 610B9052 injector nozzle insert is a precision fuel-system component for BUKH DV10ME and BUKH DV20 marine diesel engines. Installed as part of the injector, it helps deliver correct fuel atomization for clean, stable combustion, supporting smooth running and dependable engine response under varying marine loads. |
$ 438.50
-
+
|
|
1-2 weeks delivery time The Bukh 610B9220 complete injector nozzle is a ready-to-install fuel injection component for BUKH DV24RME and DV29RME engines, fitted in the cylinder head and valve area. It supports clean, consistent fuel delivery at the injector tip for dependable combustion, and it is intended to be used with the updated sealing washer Bukh 522C3080 in line with Technical Notice Bukh SI1002. |
$ 441.05
-
+
|
|
1-2 weeks delivery time The Bukh 610B9250 complete nozzle assembly is a ready-to-install nozzle unit used across key systems on BUKH DV32, DV36, and DV48 marine diesel engines. Specified for cylinder head and valve-related installation on DV32, fuel injection and valve assemblies on DV36 and DV48, and also the DV48 air inlet and turbocharger group, it supports clean, dependable engine operation with an OEM-correct fit. |
$ 470.46
-
+
|
|
1-2 weeks delivery time The Bukh 610C0120 fuel lift pump is a fuel feed pump unit designed to supply steady low-pressure fuel flow from the tank to the fuel filtration and injection system on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used within the fuel system assemblies, it supports dependable starting and consistent engine operation by keeping fuel delivery stable under varying load and sea conditions. |
$ 280.37
-
+
|
|
1-2 weeks delivery time The Bukh 610D0053 fuel filter element is a replacement insert for the fuel filtration system on BUKH DV10 and DV20 marine diesel engines. It helps keep fuel supply clean to support stable combustion and protect precision fuel-system components; this insert is supplied without a seal, and the matching seal must be ordered separately as 530P1020. |
$ 49.01
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.