Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 620L0671 E-line is a dedicated line element for BUKH DV10LME marine diesel engines, intended to restore correct routing and secure connection within the engine’s E-line arrangement. It supports a tidy, dependable installation and is suited for service replacement where an OEM-fit line is required. |
$ 222.92
-
+
|
|
1-2 weeks delivery time The Bukh 620L0683 main bearing 0.25 is a precision engine bearing shell for the crankshaft main journals in BUKH DV10LME marine diesel engines. Designed to support stable crankshaft alignment under load, it helps maintain smooth rotation, consistent oil film control, and reliable bottom-end durability in continuous marine operation. |
$ 466.60
-
+
|
|
1-2 weeks delivery time The Bukh 620L0726 push rod (226 mm length) is a precision valve-train component used to transmit cam follower motion to the rocker gear for accurate valve operation. Built for marine engine service, it supports stable valve timing and smooth running when replacing worn or bent push rods during top-end maintenance. |
$ 188.81
-
+
|
|
1-2 weeks delivery time The Bukh 71041-05101 spring lock washer is a securing fastener element for the ECU and case on BUKH S270J marine engines. Designed to maintain bolt preload under vibration, it helps keep the electronic control unit and its housing firmly fastened for dependable operation in marine service. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 80P12-S95SC nipple is a coolant-line connection component for BUKH S270J marine diesel engines, used within the coolant pipe and hose assembly. It helps create a secure junction between cooling-system hoses and piping, supporting reliable coolant circulation and minimizing the risk of leaks in the engine’s cooling circuit. |
$ 15.58
-
+
|
|
1-2 weeks delivery time The Bukh 80P14-S11SC coolant nipple is a compact connection fitting used on the turbocharger coolant circuit of BUKH S270J marine diesel engines. It provides a secure interface for routing coolant through the turbocharger area, supporting stable temperature control and dependable operation in marine service. |
$ 11.72
-
+
|
|
1-2 weeks delivery time The Bukh 8E+68 starting clutch is a key engagement component in the engine starting system, designed to transmit starter drive torque during cranking and disengage once the engine fires. Built for dependable operation in marine service, it supports consistent starts and helps protect the starter drive from unnecessary load after ignition. |
$ 1,020.88
-
+
|
|
1-2 weeks delivery time The Bukh 90E07-01454 ear clamp is a compact securing fastener used on BUKH R210J and S270J marine diesel engines in the oil pan and fuel system assemblies, including the fuel filter installation. It provides a firm, vibration-resistant hold on connected lines to help maintain clean, leak-free routing in demanding marine engine-room conditions. |
$ 2.81
-
+
|
|
1-2 weeks delivery time The Bukh 90E09-05004 ear clamp is a secure hose clamping solution used on the BUKH R210J sea water pump and oil cooler assemblies. It provides consistent, even clamping force to help keep marine fluid lines tight and leak-resistant in vibration-prone engine-room conditions. |
$ 5.90
-
+
|
|
1-2 weeks delivery time The Bukh 90E09-05754 ear clamp is a secure hose clamp for sea water hose connections on BUKH S270J engines. Used across the sea water pump, intercooler, heat exchanger, and oil cooler assemblies, it helps maintain tight, leak-resistant joints in the raw-water cooling circuit for dependable cooling system operation. |
$ 6.03
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-04004 securing clamp is a cooling-system fastener used on BUKH R210J and S270J marine diesel engines. Installed on the coolant pipe and hose assemblies and on the heat exchanger assembly, it helps hold hoses and piping firmly in place to support leak-resistant coolant circulation in marine operating conditions. |
$ 10.65
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-05004 clamp is a secure, OEM-style fastening component used across key cooling-system connections on BUKH R210J and S270J marine diesel engines. Installed on the R210J intercooler and coolant pipe and hose runs, and also within the S270J heat exchanger assembly, it helps keep hoses and pipes firmly retained to support leak-resistant, vibration-tolerant operation at sea. |
$ 11.08
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-06004 clamp is a secure fastening component used across multiple BUKH R210J and S270J engine assemblies, including the air filter, intake manifold, sea water pump, and heat exchanger. It helps maintain tight, vibration-resistant connections to reduce the risk of leaks, air ingress, and hose or duct movement in demanding marine operation. |
$ 11.62
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-07004 clamp is a secure fastening component used on BUKH R210J air filter installations and BUKH S270J intercooler connections. It helps keep hoses or ducting firmly seated to reduce air leaks and vibration-related loosening, supporting stable airflow through the intake and charge-air cooling systems in marine service. |
$ 12.56
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-08004 clamp is a securing fastener used on the air filter installation for BUKH R210J and S270J engines and also on the S270J intercooler assembly. It provides a firm hold on connected components to help maintain a sealed, stable air-intake and charge-air setup in marine operating conditions. |
$ 13.76
-
+
|
|
1-2 weeks delivery time The Bukh 90W12-11004 bellows clamp is a secure fastening component used on the exhaust elbow and pipe connection for BUKH R210J and S270J marine engines. It provides firm, vibration-resistant clamping to help keep the exhaust joint tight, supporting a dependable exhaust run and reducing the risk of leaks at the bellows connection. |
$ 14.61
-
+
|
|
1-2 weeks delivery time The Bukh 91931-2F250 wiring mounting bracket secures and organizes engine wiring on the rocker cover of BUKH R210J marine diesel engines. Designed for a clean, stable installation, it helps protect wiring from vibration and movement in the rocker cover area for dependable operation in marine service. |
$ 4.28
-
+
|
|
1-2 weeks delivery time The Bukh 94750-37100 oil pressure switch assembly monitors engine oil pressure on BUKH S270J marine diesel engines within the engine oil pump system. It supports dependable pressure indication and protection functions, helping operators catch low-oil-pressure conditions early to safeguard critical internal engine components. |
$ 42.78
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.