Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 57273-26000 eye bolt is a purpose-built fastening component for the power steering assembly on BUKH S270J marine engines. Designed for secure attachment where a looped fixing point is required, it supports stable alignment and dependable retention of connected hardware in the steering system. |
$ 9.34
-
+
|
|
1-2 weeks delivery time The Bukh 57587-34500 retaining clip is a secure fastener used on BUKH S270J installations in both the turbocharger and power steering assemblies. Designed for dependable hold in high-vibration marine engine compartments, it helps keep supported components properly secured for stable operation and service reliability. |
$ 4.21
-
+
|
|
1-2 weeks delivery time The Bukh 57587-34900 retaining clip secures power steering components on BUKH S270J marine engines. Designed for dependable hold in a marine environment, it helps keep hoses, lines, or related fittings properly positioned to support stable steering operation and reduce the risk of vibration-related loosening. |
$ 4.21
-
+
|
|
1-2 weeks delivery time The Bukh 600-00538 fuel lift pump gasket is a sealing element for the fuel connections area on BUKH EPA48 marine diesel engines. Installed at the fuel supply pump interface, it helps maintain a tight, leak-resistant joint to support steady fuel delivery and clean, reliable engine operation. |
$ 32.65
-
+
|
|
1-2 weeks delivery time The Bukh 600-00540 starter motor is a dependable electric starting unit for BUKH EPA28, EPA36, and EPA48 marine engines, designed for the electric start and alternator assembly. It delivers the cranking power needed to turn the engine over quickly and consistently, making it an ideal replacement when restoring reliable start-up performance onboard. |
$ 5,062.48
-
+
|
|
1-2 weeks delivery time The Bukh 600-00549 spring washer is a locking fastener element used across BUKH EPA-series marine engines, including EPA28, EPA36, EPA39, and EPA48. Fitted in assemblies such as the electric start and alternator setup and referenced in EPA48 fuel connection components (including overflow and leak oil collection piping), it helps maintain clamp load under vibration for secure, marine-ready fastening. |
$ 353.24
-
+
|
|
1-2 weeks delivery time The Bukh 600-00597 sealing washer is a copper crush washer used on the fuel pump banjo connection in the fuel connection assembly on BUKH EPA48 marine engines. It helps the banjo joint seal correctly to reduce the risk of fuel seepage and supports clean, reliable fuel system service on installations using a Kubota fuel pump layout. |
$ 13.86
-
+
|
|
1-2 weeks delivery time The Bukh 600-00630/3 flywheel with ring gear is a flywheel unit for BUKH EPA28 marine diesel engines, installed in the flywheel housing. It provides rotational inertia for smooth running and includes the starter ring gear interface to support reliable engine cranking and stable power delivery. |
$ 5,018.68
-
+
|
|
1-2 weeks delivery time The Bukh 600-01757 Super5 speed control lever is a control linkage component for BUKH EPA28 marine engines, used with the S5 speed lever arrangement. Installed at the flywheel housing and engine support locations, it provides positive lever action for precise speed control and dependable handling in onboard operation. |
$ 110.63
-
+
|
|
1-2 weeks delivery time The Bukh 600-06897 banjo fitting part B for the fuel pump supports secure, leak-resistant fuel line routing on BUKH EPA48 marine diesel engines. Designed for the fuel connection assembly, it helps maintain reliable fuel delivery by providing a proper interface between the pump and connected fuel lines. |
$ 92.20
-
+
|
|
1-2 weeks delivery time The Bukh 600-09301 recharge hydraulic pump supports the HS Start system on BUKH EPA28 and EPA36 marine engines, supplying recharge pressure where the pump is installed at the flywheel housing. Rated for 150 bar, this hydraulic pump helps ensure responsive starting support and stable hydraulic performance in the HS Start circuit. |
$ 2,267.19
-
+
|
|
1-2 weeks delivery time The Bukh 600-62620 1 1/2 in BSP exhaust gasket is a sealing element for the header tank exhaust connection on BUKH EPA28, EPA36, and EPA48 marine engines. It helps maintain a tight, reliable joint to reduce exhaust leakage, supporting safe operation and dependable performance in the marine exhaust system. |
$ 49.78
-
+
|
|
1-2 weeks delivery time The Bukh 600-62670 oil pressure switch is a monitoring component used on the header tank installation for BUKH EPA28, EPA36, and EPA48 marine engines. It supports reliable oil-pressure signaling to help protect the engine by enabling timely indication of low oil pressure during operation. |
$ 163.65
-
+
|
|
1-2 weeks delivery time The Bukh 600-67830 fuel lift pump supports steady low-pressure fuel supply in the fuel connections system on BUKH EPA28 and EPA36 marine diesel engines. Designed to move fuel from the tank toward the engine’s fuel system for reliable feed and priming, this OEM-grade replacement helps maintain consistent engine operation under changing load and sea conditions. |
$ 1,252.85
-
+
|
|
1-2 weeks delivery time The Bukh 600-72880 S3 exhaust manifold gasket provides a dependable seal for the exhaust manifold connection on BUKH EPA48 marine diesel engines. Used within the header tank assembly reference, it helps prevent exhaust gas leakage at the joint, supporting clean operation and protecting surrounding components from heat and soot blow-by. |
$ 126.87
-
+
|
|
1-2 weeks delivery time The Bukh 600-80290 fuel filter head and bleed screw supports clean, air-free fuel delivery on BUKH EPA28, EPA36, and EPA48 marine engines. Installed in the fuel connections assembly, it provides a secure mounting point for the fuel filter and enables controlled bleeding to help purge trapped air for smoother starting and stable running. |
$ 670.04
-
+
|
|
1-2 weeks delivery time The Bukh 600-80300 exhaust manifold sealing gasket is designed for the exhaust manifold exhaust joint on BUKH EPA28 marine engines and is referenced for the header tank assembly. It helps maintain a tight, reliable seal at the exhaust manifold interface to reduce exhaust leakage and support clean, dependable operation in marine service. |
$ 148.53
-
+
|
|
1-2 weeks delivery time The Bukh 600-80330 exhaust sealing gasket is designed to secure a tight, leak-resistant joint in the exhaust-side installation associated with the header tank assembly on BUKH EPA36, S5, and 4CLY marine engines. Replacing this gasket helps maintain correct exhaust flow and protects surrounding components by keeping the connection properly sealed under marine operating conditions. |
$ 211.98
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.