Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 561B0127 radial sealing ring is a precision shaft seal used to help retain lubricants and keep contaminants out of critical rotating interfaces in marine engine assemblies. It supports clean, controlled sealing performance and is also cross-referenced as an alternative to part number 0.2233.010. |
$ 22.49
-
+
|
|
1-2 weeks delivery time The Bukh 561B0201 oil seal ring is a precision sealing component for the circulation pump on BUKH DV36 and DV48 marine diesel engines. It helps retain oil where it belongs and supports dependable pump operation by maintaining a tight seal under continuous engine-room duty. |
$ 21.70
-
+
|
|
1-2 weeks delivery time The Bukh 561B0350 radial sealing ring is a shaft-type seal used in the hand starting assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to maintain a tight seal at rotating interfaces, it helps keep lubrication where it belongs and supports clean, dependable operation of the hand start arrangement. |
$ 31.36
-
+
|
|
1-2 weeks delivery time The Bukh 561B0356 shaft seal ring is a GACO SM 35.50.7 sealing element used at the rear end cover and rotating weight area on BUKH DV-series engines, helping retain engine oil and reduce leakage along rotating shafts. It also applies to the rear end rotating weight and fuel lift pump area on DV36 and DV48, supporting clean, reliable operation in the engine’s rear-end assemblies across DV24RME, DV29RME, DV32, DV36, and DV48 models. |
$ 42.57
-
+
|
|
1-2 weeks delivery time The Bukh 561B0402 radial shaft sealing ring is a propeller shaft seal for BUKH S-Drive installations, helping keep fluids contained while protecting the shaft area from seawater ingress and contamination. Supplied as a set consisting of Gottwald 1076491 and 1117095, it is sized 40 x 52 x 8 for a correct fit in the S-Drive propeller shaft sealing arrangement. |
$ 48.21
-
+
|
|
1-2 weeks delivery time The Bukh 561B0595 front radial sealing ring is a precision shaft seal used at the front end of the engine to help retain oil and reduce leakage in the crankcase and front end cover area. Supplied in size 59.5 x 80 x 10, it suits BUKH DV10, DV20, DV24, DV29, and DV32 engine applications, including DV24RME and DV29RME installations, and replaces earlier part numbers 561B0602, 561B0600, and 000E8532. |
$ 80.32
-
+
|
|
1-2 weeks delivery time The Bukh 561B0706 shaft sealing ring is a flywheel-side oil seal for BUKH DV36 and DV48 engines from engine number 2051 onward. Installed at the flywheel and front-end rotating weight area, it helps retain oil and keep contaminants out of the rotating assembly for clean, dependable operation in marine service. |
$ 239.45
-
+
|
|
1-2 weeks delivery time The Bukh 562C0300 sealing ring is a precision sealing component designed to create a tight, leak-resistant joint in Bukh engine and onboard system assemblies. Ideal for service replacement, it helps maintain proper sealing between mating parts to protect fluids, preserve system integrity, and support dependable operation in marine duty. |
$ 63.50
-
+
|
|
1-2 weeks delivery time The Bukh 562H0014 ring is a genuine replacement ring used across Bukh marine engine assemblies where this specific ring is specified. It supports correct component alignment and a secure, service-ready rebuild, helping maintain dependable operation when renewing worn or damaged parts during maintenance. |
$ 28.13
-
+
|
|
1-2 weeks delivery time The Bukh 562J0000 valve sealing gasket is a precision seal used in the valve area on BUKH DV-series marine diesel engines. Installed within the cylinder head and valve train or within fuel injection and valve assemblies (model dependent), it helps maintain a tight seal around the valve to support clean, stable engine operation and dependable service life. |
$ 40.18
-
+
|
|
1-2 weeks delivery time The Bukh 569A0010 clamping ring is a secure fastener for key BUKH DV-series assemblies, including the air inlet filter, air inlet and turbocharger connections, and keel cooling installations on DV24RME, DV32, DV36, and DV48 engines. It helps hold hoses and ducting firmly in place to reduce the risk of leaks, air ingress, and vibration-related loosening in marine service. |
$ 20.08
-
+
|
|
1-2 weeks delivery time The Bukh 569A0023 anti-corrosive clamp secures components in the rear-end rotating weight and fuel lift pump area on BUKH DV36 and DV48 marine diesel engines. Designed as a clamping ring style fastener, it provides a firm hold that supports reliable operation in corrosion-prone marine environments. |
$ 21.70
-
+
|
|
1-2 weeks delivery time The Bukh 569A0035 clamping ring Ø48/Ø70 is a secure fastening component used across multiple BUKH assemblies, including the air inlet and turbocharger system as well as the injection pump and oil cooler area. It helps maintain tight, reliable connections on DV32, DV36, DV48, and EPA48 marine engines to support consistent airflow and leak-resistant hose and duct joints in demanding marine operation. |
$ 24.92
-
+
|
|
1-2 weeks delivery time The Bukh 569A0040 clamping ring secures air-intake and turbocharger connections on BUKH DV48 marine diesel engines. Designed for a tight, vibration-resistant hold, it helps keep intake joints properly clamped to support stable airflow and dependable turbo system operation in marine service. |
$ 30.56
-
+
|
|
1-2 weeks delivery time The Bukh 569A0304 rust-proof clamping ring is a secure hose and line retaining component used in the keel cooling assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps keep cooling connections tight under vibration and thermal cycling, supporting dependable coolant circulation and leak-resistant operation underway. |
$ 10.87
-
+
|
|
1-2 weeks delivery time The Bukh 57100-3J200 power steering oil pump is a dedicated hydraulic pump for the power steering system on BUKH S270J marine diesel engines. It supplies the oil flow and pressure needed for smooth steering response, helping maintain precise helm control and dependable operation underway. |
$ 1,359.47
-
+
|
|
1-2 weeks delivery time The Bukh 57190-2F000 power steering reservoir tank assembly supports stable hydraulic operation in the power steering system on BUKH S270J marine engines. Designed as a direct-fit replacement, it provides a secure fluid reservoir to help maintain consistent steering assist and dependable response underway. |
$ 95.31
-
+
|
|
1-2 weeks delivery time The Bukh 57272-34000 copper washer is a sealing element for the power steering system on BUKH S270J marine engines. Used to help secure leak-tight joints at fluid connections, it supports dependable hydraulic performance and clean, reliable operation in marine service. |
$ 1.94
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.