Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 552J0970 oil pressure switch (M10 x 1) is a monitoring component for the main electrical system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps support dependable oil-pressure indication and engine protection by providing an oil-pressure signal used by the vessel’s electrical instrumentation and alarm functions. |
$ 105.24
-
+
|
|
1-2 weeks delivery time The Bukh 552J1006 remote water temperature gauge is an instrument-panel thermometer designed to monitor engine coolant temperature on BUKH DV and EPA marine diesel engines. It gives the operator clear temperature feedback at the helm, helping protect the engine by supporting timely response to cooling-system issues during operation. |
$ 497.25
-
+
|
|
1-2 weeks delivery time The Bukh 552J1007 oil pressure gauge is a reliable instrument-panel gauge for monitoring engine lubricating oil pressure on BUKH DV24RME, DV29RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 marine diesel engines. Designed as a direct replacement for gauge reference 552J0997, it provides clear oil-pressure indication to support safe operation and help protect the engine under varying load conditions. |
$ 575.87
-
+
|
|
1-2 weeks delivery time The Bukh 552K0006 ignition switch kit with two keys provides dependable on/off control for the starting and electrical circuit on BUKH ME, SME, and DV8–DV48 marine engines. Designed as a practical replacement switch for the engine control panel, it supports secure operation and straightforward key-based starting, and it is intended for standard marine engine installations rather than lifeboat engines. |
$ 331.68
-
+
|
|
1-2 weeks delivery time The Bukh 552K0008 start and stop push button switch with rubber cap provides dependable command input at the control panel for BUKH DV24RME, DV29RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 engines. Built for marine operation, it supports quick, positive start and stop actuation while the rubber cap helps protect the switch in a busy helm or engine control station environment. |
$ 44.51
-
+
|
|
1-2 weeks delivery time The Bukh 552K0211 waterproof toggle switch is a sealed control-panel switch designed for dependable onboard operation in harsh marine environments. Built for BUKH DV and EPA engine control panels, it provides positive switching action for common panel functions while helping protect the electrical circuit from moisture exposure. |
$ 200.94
-
+
|
|
1-2 weeks delivery time The Bukh 552K0251 protective cap is a durable cover designed to fit the Bukh 552K0210 toggle switch, helping shield the switch actuator from spray, dust, and accidental operation. Ideal for marine electrical installations, it supports cleaner switchgear operation and helps extend service life in harsh onboard environments. |
$ 163.82
-
+
|
|
1-2 weeks delivery time The Bukh 560B0016 sealing O-ring is designed for the lubrication pump with pipes on BUKH DV36 marine diesel engines. It helps maintain a tight seal in the lubrication circuit to support stable oil flow, reduce the risk of leaks, and keep the engine’s lubrication system operating reliably. |
$ 7.25
-
+
|
|
1-2 weeks delivery time The Bukh 560B1017 sealing O-ring is a precision seal used on BUKH DV24RME, DV29RME, and DV32 engines in both the crankcase and front end cover area and the base cover with suction valve. It helps maintain a tight joint to reduce fluid leakage and supports stable engine operation by protecting critical sealing surfaces during service and maintenance. |
$ 2.96
-
+
|
|
1-2 weeks delivery time The Bukh 560B1032 O-ring sealing element is designed to restore a tight, leak-resistant seal in Bukh marine systems. As a precision replacement O-ring, it helps maintain pressure and fluid containment at mating surfaces, supporting dependable operation and reducing the risk of seepage in service-critical connections. |
$ 3.72
-
+
|
|
1-2 weeks delivery time The Bukh 560D0006 sealing O-ring is a precision stop-solenoid seal for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. With a Ø6 x 1.78 profile, it helps maintain a tight seal in the stop-solenoid assembly to support reliable shutoff operation and reduce the risk of leakage through the solenoid interface. |
$ 2.96
-
+
|
|
1-2 weeks delivery time The Bukh 560D0007 O-ring is a sealing element designed to help maintain leak-tight joints in Bukh marine engine assemblies. Used wherever an O-ring seal is specified, it supports stable fluid containment and dependable operation by preventing unwanted leakage at mating surfaces. |
$ 4.45
-
+
|
|
1-2 weeks delivery time The Bukh 560D0025 sealing ring is a precision seal used across the camshaft area and the lubricating oil system, supporting clean, stable oil circulation in BUKH DV29RME and DV32 marine diesel engines. Installed in the camshaft, lubricating oil pump, and lubricating oil filter assemblies, it helps maintain proper sealing to reduce oil seepage and protect engine components under continuous marine operation. |
$ 3.72
-
+
|
|
1-2 weeks delivery time The Bukh 560F0009 sealing O-ring is a versatile OEM replacement used across multiple BUKH DV-series assemblies, including cylinder head and valve components as well as selected injection pump, oil cooler, and hand-start applications. Designed to help maintain tight, leak-resistant joints, it supports reliable operation on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. |
$ 3.72
-
+
|
|
1-2 weeks delivery time The Bukh 560F0011 O-ring seal supports leak-tight sealing on BUKH DV24RME, DV29RME, and DV32 marine diesel engines, used at the crankcase and front end cover as well as the rear end cover around the rotating weights area. Installed as part of the engine cover sealing system, it helps retain oil and keep contaminants out for clean, reliable operation. |
$ 3.72
-
+
|
|
1-2 weeks delivery time The Bukh 560F0013 O-ring sealing element is designed to prevent fluid leakage across multiple engine sealing points on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used in areas such as end covers, cylinder head and valve components, crankcase covers, and camshaft and lubrication-system groupings, it helps maintain stable oil and coolant containment for dependable engine operation. |
$ 4.67
-
+
|
|
1-2 weeks delivery time The Bukh 560F0014 sealing O-ring (14.6x2.4) is designed for the base cover with suction valve on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain a tight seal at the cover interface to support proper suction-side integrity and reduce the risk of leaks that can affect system performance. |
$ 3.50
-
+
|
|
1-2 weeks delivery time The Bukh 560F0017 O-ring is a sealing element for the BUKH DV36 lubrication pump with pipes, helping maintain a tight, leak-resistant joint in the engine’s oil circulation system. Designed for OEM-style fit, it supports stable oil pressure and clean operation by preventing oil seepage at the pump and pipe connections. |
$ 10.43
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.