Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 545A3129 ball bearing is a precision bearing element used in the circulation pump on BUKH DV36 and DV48 marine diesel engines. It supports smooth shaft rotation inside the pump, helping maintain steady coolant circulation while reducing friction and wear for dependable cooling-system operation. |
$ 49.01
-
+
|
|
1-2 weeks delivery time The Bukh 545B1030 pump drive shaft is a cooling water pump component that supports smooth, reliable rotation of the pump’s internal elements, helping maintain steady seawater flow for marine engine cooling. It is intended as a direct replacement part within the cooling water pump assembly to restore dependable circulation performance. |
$ 237.43
-
+
|
|
1-2 weeks delivery time The Bukh 545H0145 axial thrust ball bearing (SKF 51103) is a precision bearing element used to support axial loads in key engine control and valve-train related assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed in areas such as the governor and regulating handle and, on DV24RME, the camshaft and lubrication system group, it helps maintain smooth, controlled movement and consistent mechanical alignment under operating load. |
$ 94.01
-
+
|
|
1-2 weeks delivery time The Bukh 545Ø2040 steel ball (5 mm diameter) is a precision component used across key mechanical assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed in the governor and regulating handle system and, on DV24RME, within the camshaft, lubricating oil pump, and lubricating oil filter assembly group, it supports accurate mechanical interaction and dependable operation where a hardened ball element is required. |
$ 18.50
-
+
|
|
1-2 weeks delivery time The Bukh 545Ø2061 connecting-rod ball (8 mm) is a precision ball element used within the crankshaft and connecting-rod assembly on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Designed to support correct mechanical interaction inside the rotating assembly, it helps maintain reliable operation of the connecting rod, bearings, piston, and cylinder liner system. |
$ 22.03
-
+
|
|
1-2 weeks delivery time The Bukh 545V0032 needle bearing bush (HK 2512) is a precision bearing element used in the raised hand starting assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports smooth shaft rotation, reduces friction under load, and helps the hand-start mechanism operate reliably during repeated starting cycles. |
$ 37.39
-
+
|
|
1-2 weeks delivery time The Bukh 545V3320 inner-collar bearing bush supports smooth, stable rotation in the raised hand-starting assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. With its LR 20X25X12.5 sizing, this component helps keep the hand-start mechanism aligned, reducing friction and promoting dependable manual starting performance. |
$ 28.13
-
+
|
|
1-2 weeks delivery time The Bukh 551C0354 flat plug (4 mm) is a compact electrical connector used in the electric mains system on BUKH DV-series marine engines including DV24RME, DV29RME, DV32, DV36, and DV48. It provides a clean, reliable termination point to help keep onboard wiring organized and secure in marine engine-room conditions. |
$ 2.84
-
+
|
|
1-2 weeks delivery time The Bukh 551D0121 tube bracket is a saddle-style clamp used on the lubrication pump pipework of BUKH DV36 marine diesel engines. It supports and secures oil lines in place to help maintain orderly routing, reduce vibration-related movement, and protect the lubrication system connections in service. |
$ 9.26
-
+
|
|
1-2 weeks delivery time The Bukh 551D0126 suction pipe bracket saddle secures the suction pipe within the lubrication pump pipework on BUKH DV36 marine diesel engines. By supporting and holding the pipe in position, it helps protect the lubrication system routing from vibration-related movement and keeps the pump-and-pipe assembly stable in service. |
$ 9.26
-
+
|
|
1-2 weeks delivery time The Bukh 552A0355 green temperature warning light is a 12V control-panel indicator used on BUKH DV24RME, DV29RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 marine engines. Built to provide clear temperature-status indication at the helm, this control lamp supports quick operator awareness and dependable panel operation, and it replaces part number 552A0350. |
$ 28.90
-
+
|
|
1-2 weeks delivery time The Bukh 552A0356 orange oil warning indicator lamp is a control-panel signal light for BUKH DV and EPA marine diesel engines, helping operators quickly identify an oil warning condition at the helm. Designed as a direct replacement for earlier lamp version 552A0352, it restores clear, high-visibility status indication on the engine control panel across multiple DV and EPA models. |
$ 28.90
-
+
|
|
1-2 weeks delivery time The Bukh 552A0357 red amp warning light is a control panel indicator lamp used on BUKH DV and EPA marine engine control panels, including DV24RME, DV29RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 installations. It provides a clear red visual alert for amp-related warning indication, helping the operator monitor key electrical status directly from the helm or engine panel. |
$ 28.90
-
+
|
|
1-2 weeks delivery time The Bukh 552A0370 speedometer indicator light is an instrument-panel warning lamp used with the tachometer display to provide clear status indication at the helm. Supplied as a direct replacement part, it replaces earlier versions 552A1520 and 552A1510 to help keep your Bukh monitoring panel easy to read and dependable underway. |
$ 46.12
-
+
|
|
1-2 weeks delivery time The Bukh 552A2341 40 A fuse cable is a protective electrical lead designed to integrate a 40 amp fuse into a vessel or engine electrical circuit. It helps safeguard wiring and connected components by providing a dedicated fused connection, supporting dependable power distribution and fault protection in marine electrical systems. |
$ 6.59
-
+
|
|
1-2 weeks delivery time The Bukh 552J0918 temperature sensor and switch is a 100°C, two-circuit cooling VDO unit used on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 engines. Designed for both keel cooling and electric mains applications, it helps monitor coolant temperature and trigger temperature-related control or alarm functions, making it a dependable replacement for older part number 008E8390. |
$ 408.09
-
+
|
|
1-2 weeks delivery time The Bukh 552J0930 audible alarm is a warning sounder designed for Bukh marine engine monitoring and alarm circuits. It provides a clear audible alert to help draw immediate attention to critical operating conditions, supporting safer operation and faster response onboard. |
$ 416.79
-
+
|
|
1-2 weeks delivery time The Bukh 552J0965 oil pressure transmitter provides oil-pressure monitoring for the main electrical system on BUKH DV36 and DV48 marine diesel engines. Working as an oil pressure switch in the engine’s electrical circuit, it supports dependable warning and protection functions by reacting to changes in engine oil pressure during operation. |
$ 596.37
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.