Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 1G065-5390-0 injector nozzle and holder kit supports clean, consistent fuel injection on BUKH EPA28 and EPA36 marine diesel engines. Supplied as an injection set for the nozzle holder assembly, it is suited for service work around the injector nozzle holder and glow plug area, helping restore proper spray formation and dependable combustion performance. |
$ 1,316.03
-
+
|
|
1-2 weeks delivery time The Bukh 1G092-0304-0 complete cylinder head is a direct-fit replacement for the cylinder head assembly on BUKH EPA36 marine diesel engines. Built to restore proper combustion chamber sealing and valve-train alignment, it supports stable compression, efficient running, and dependable operation in demanding marine service. |
$ 14,566.12
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-0331-0 cylinder head gasket (1.20 mm) seals the joint between the cylinder head and engine block on BUKH EPA48 engines. Used in the cylinder head assembly and also specified for the EPA48 upper gasket kit option, it helps maintain compression integrity while keeping combustion gases, coolant, and lubricating oil properly separated for reliable marine operation. |
$ 692.14
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-0360-0 cylinder head gasket (1.15 mm) seals the cylinder head joint on BUKH EPA48 marine diesel engines. Installed in the cylinder head assembly, it helps maintain proper compression and keeps combustion gases, coolant, and oil separated for dependable engine operation. |
$ 692.14
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-0361-0 cylinder head gasket (1.25 mm) is a critical sealing component for the cylinder head assembly on BUKH EPA48 marine diesel engines. It helps maintain proper sealing between the cylinder head and engine block to support stable compression and keep combustion gases, coolant, and oil properly separated during operation. |
$ 692.14
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-0362-0 cylinder head gasket is a 1.30 mm sealing element for the cylinder head assembly on BUKH EPA48 marine diesel engines. It helps maintain proper sealing between the cylinder head and engine block, supporting stable compression and protecting the engine from combustion-gas, coolant, and oil leakage at the head joint. |
$ 692.14
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-0363-0 cylinder head gasket is a 1.35 mm sealing element for the cylinder head assembly on BUKH EPA48 marine diesel engines. It helps maintain a tight seal between the cylinder head and engine block to support stable compression and dependable coolant and combustion-gas separation in demanding marine operation. |
$ 692.14
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-9935-0 upper gasket kit is an optional sealing set for the upper engine area on BUKH EPA48 marine diesel engines. Designed to restore correct sealing after service work, it helps prevent fluid and gas leaks while supporting stable compression and dependable operation. |
$ 2,406.29
-
+
|
|
1-2 weeks delivery time The Bukh 1G464-9936-4 lower gasket kit is a matched sealing set for the lower gasket assembly on BUKH EPA48 marine engines. Supplied as an optional kit, it supports clean, reliable reassembly by restoring proper sealing where the lower section is opened for service, helping protect the engine from leaks and maintaining dependable operation onboard. |
$ 2,062.33
-
+
|
|
1-2 weeks delivery time The Bukh 1G624-0304-2 complete cylinder head assembly is built for the BUKH EPA48 engine cylinder head system, restoring a secure combustion seal and proper valve-train support. Designed as an OEM-grade replacement, it helps maintain compression, efficient combustion, and stable engine operation in marine duty. |
$ 9,923.13
-
+
|
|
1-2 weeks delivery time The Bukh 1G642-7305-0 mechanical seal assembly is a critical water pump sealing component for BUKH EPA28 and BUKH EPA36 marine engines. Installed in the water pump, it helps keep coolant where it belongs by sealing the pump shaft area, supporting stable cooling performance and reducing the risk of leakage during continuous marine operation. |
$ 328.59
-
+
|
|
1-2 weeks delivery time The Bukh 1G675-0304-0 complete cylinder head unit with valve and spring is built for the BUKH EPA28 cylinder head assembly, restoring proper combustion sealing and valvetrain operation. Designed as an OEM-fit replacement, it supports stable compression, efficient gas exchange, and dependable performance in demanding marine duty. |
$ 10,529.85
-
+
|
|
1-2 weeks delivery time The Bukh 1G680-7287-0 water pipe is a cooling-system line for BUKH EPA36 marine engines, routing water through the engine’s water pipe circuit for dependable coolant flow. Designed as an OEM-grade replacement, it supports stable operating temperature by maintaining clean, consistent circulation where the water pipe is installed. |
$ 165.84
-
+
|
|
1-2 weeks delivery time The Bukh 1G778-6556-0 glow plug rail cord is an electrical distribution component for the nozzle holder and glow plug assembly on BUKH EPA48 marine diesel engines. It connects and feeds the glow plug circuit so the preheating system can warm the combustion area for more dependable cold starting and smoother initial running. |
$ 100.93
-
+
|
|
1-2 weeks delivery time The Bukh 1G986-9936-2 lower gasket kit provides the sealing elements used in the lower engine area on BUKH EPA36 marine diesel engines. This optional gasket kit is ideal for service work where dependable sealing is critical to maintain clean, leak-free operation and proper assembly integrity. |
$ 1,185.46
-
+
|
|
1-2 weeks delivery time The Bukh 1G994-9935-0 upper gasket kit is a complete upper-end sealing set for BUKH EPA36 marine diesel engines. Designed as an OEM-style replacement kit, it supports clean, reliable reassembly by sealing key upper-engine joints to help maintain proper compression, fluid separation, and stable operation after service work. |
$ 2,136.23
-
+
|
|
1-2 weeks delivery time The Bukh 1G995-9935-3 upper gasket set is a sealing kit for the upper section of the BUKH EPA28 marine diesel engine. Designed to restore tight, reliable joints during service work, it helps prevent fluid and gas leaks in the upper engine area and supports clean, stable operation in marine duty. |
$ 1,619.63
-
+
|
|
1-2 weeks delivery time The Bukh 1G995-9936-6 lower gasket set provides a matched sealing kit for the lower section of BUKH EPA28 marine diesel engines. Designed to support clean, reliable reassembly, this gasket kit helps maintain proper sealing between lower-engine mating surfaces during service work and overhauls, and is supplied as an optional lower gasket kit. |
$ 1,185.46
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.