Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 200-01133 water temperature switch sensor (95°C, SW/SNO) is a header tank-mounted temperature sensing component for BUKH EPA28, EPA36, and EPA48 marine engines. It monitors coolant temperature in the header tank and provides a switching signal at the rated temperature to support reliable overtemperature warning and protection in the engine cooling system. |
$ 341.75
-
+
|
|
1-2 weeks delivery time The Bukh 200-91730 V-belt pulley is an 80 mm diameter, 70 amp-rated pulley for the engine support arrangement on BUKH EPA48 marine engines. It provides the correct belt drive interface to keep the accessory drive running smoothly, helping maintain dependable charging and stable belt tracking in marine operation. |
$ 138.30
-
+
|
|
1-2 weeks delivery time The Bukh 201-58920/01 small button spacer is a positioning component used in the fuel connection assembly on BUKH EPA48 marine engines. It helps maintain correct spacing and alignment of fuel-line connection hardware, supporting a secure, stable fit in a vibration-prone marine environment. |
$ 29.07
-
+
|
|
1-2 weeks delivery time The Bukh Super 5 short manifold stud (201-62110/01) is a dedicated fastening component for the header tank assembly on BUKH EPA28 and EPA36 marine engines. It provides secure, vibration-resistant clamping where the manifold hardware is mounted, helping maintain a tight, reliable joint in the engine’s cooling-related header tank installation. |
$ 27.28
-
+
|
|
1-2 weeks delivery time The Bukh 201-90330 Super 3 inertia ring is a flywheel housing component for BUKH EPA48 marine engines, supporting smooth rotational stability in the flywheel area. Designed as an OEM replacement part, it helps maintain consistent drivetrain behavior and dependable engine operation under marine load changes. |
$ 1,216.99
-
+
|
|
1-2 weeks delivery time The Bukh 202-01460 fuel connector block is a fuel distribution element used on BUKH EPA-series marine engines, supporting clean, organized routing at the fuel connection points. Installed in the fuel connections assembly on EPA28, EPA36, and EPA48 engines—and also used at the flywheel housing on EPA28—it helps keep fuel lines securely connected and properly managed for dependable operation. |
$ 106.50
-
+
|
|
1-2 weeks delivery time The Bukh 202-06189 front lifting eye is a dedicated lifting point used to safely handle and position engine-related assemblies on BUKH installations. Applied on the EPA28 engine support and also used with the EPA48 header tank, this component supports secure hoisting during service work on S5 and S3M engine configurations. |
$ 73.77
-
+
|
|
1-2 weeks delivery time The Bukh 202-06194 throttle cable bracket secures and supports the throttle cable mounting on BUKH EPA48 marine engines. Used in the engine support area, this remote-control mounting console helps keep cable routing stable for smooth, predictable throttle operation and reliable control response underway. |
$ 180.52
-
+
|
|
1-2 weeks delivery time The Bukh 202-07182FP front port engine support is a mounting support used in the engine support arrangement on BUKH EPA48 marine engines. It helps secure the engine at the front mounting point, maintaining correct alignment while supporting the load and reducing transmitted vibration into the hull structure. |
$ 482.30
-
+
|
|
1-2 weeks delivery time The Bukh 202-07182FS front starboard engine support provides secure mounting support in the engine support system for BUKH EPA48 marine diesel engines. Positioned on the front starboard side, it helps stabilize the engine in the bed, reducing movement and supporting correct alignment under load for smoother operation in marine service. |
$ 482.30
-
+
|
|
1-2 weeks delivery time The Bukh 202-07182RP aft port engine support is a mounting component for the engine support arrangement on BUKH EPA48 marine engines. Positioned at the rear on the port side, it helps secure the engine to its foundation, supporting alignment and reducing unwanted movement under load for dependable operation onboard. |
$ 518.62
-
+
|
|
1-2 weeks delivery time The Bukh 202-07182RS starboard aft engine support is a rear mounting support for the engine support system on BUKH EPA48 marine engines. It helps carry engine weight at the aft end, stabilizes the installation, and supports correct drivetrain alignment to reduce vibration and movement under load. |
$ 760.72
-
+
|
|
1-2 weeks delivery time The Bukh 202-07252FS engine support foot set is a handed pair designed for the engine support arrangement on BUKH EPA36 marine engines, positioned on the starboard front support point. It helps secure the engine to its mounting foundation, maintaining alignment and reducing unwanted movement under load for smoother, more reliable operation. |
$ 580.83
-
+
|
|
1-2 weeks delivery time The Bukh 202-07252RS engine support foot is a handed mounting component used in the engine support arrangement on BUKH EPA36 marine engines. Designed for secure alignment and stable support, it helps keep the engine properly seated on its mounts to reduce movement and protect drivetrain and coupling alignment under load. |
$ 580.83
-
+
|
|
1-2 weeks delivery time The Bukh 202-07357-C 8 mm fuel line pipe is built for the fuel connections on BUKH EPA48 marine diesel engines, providing a secure route for fuel flow between system components. Designed as a direct-fit replacement, it supports clean, dependable fuel delivery and helps maintain a tight, orderly installation in the engine’s fuel plumbing. |
$ 311.77
-
+
|
|
1-2 weeks delivery time The Bukh 202-07358-A fuel return line is a 5 mm leak-off pipe designed for the fuel connection system on BUKH EPA36 and EPA48 marine diesel engines. It routes excess fuel from the injector leak-off/return circuit back through the fuel system, supporting clean, controlled fuel handling and dependable engine operation. |
$ 291.93
-
+
|
|
1-2 weeks delivery time The Bukh 202-07358-D copper fuel leak-off pipe is designed for the fuel connections on BUKH EPA36 marine diesel engines. Built as Fuel Pipe A, it returns leak-off fuel from the injection system to help keep fuel routing controlled, tidy, and dependable in marine service, with an 8 diameter line size for the specified connection. |
$ 311.77
-
+
|
|
1-2 weeks delivery time The Bukh 202-07358-E copper fuel pipe is a fuel leak-off line designed for the fuel connections on BUKH EPA36 marine diesel engines. Built to route excess fuel back from the injection system, it supports clean, controlled return flow and helps keep the fuel system operating reliably. |
$ 216.28
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.