Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 16241-0345-0 cylinder head fastener is designed for securing the cylinder head assembly on BUKH EPA28 and EPA36 marine diesel engines. It supports correct clamping of the head to the engine block, helping maintain a stable seal under combustion loads and thermal cycling for dependable operation underway. |
$ 72.54
-
+
|
|
1-2 weeks delivery time The Bukh 16241-0421-2 oil seal is a gearbox sealing component used on BUKH EPA28 and EPA36 gear case applications, also supplied within optional gasket kit and lower gasket kit assemblies. It helps retain lubricating oil where it belongs, reducing the risk of leaks and supporting clean, reliable operation of the gear case in marine service. |
$ 46.68
-
+
|
|
1-2 weeks delivery time The Bukh 16241-2131-0 piston pin is a precision engine internal component used in the piston and crankshaft assembly on BUKH EPA28 and EPA36 marine diesel engines, and it is also used in the optional EPA36 piston kit. It connects the piston to the connecting rod, supporting smooth pivoting motion and dependable power transfer through each combustion cycle. |
$ 85.10
-
+
|
|
1-2 weeks delivery time The Bukh 16241-2133-0 piston pin circlip is a retaining fastener used in the piston and crankshaft assembly of BUKH EPA28 and EPA36 marine diesel engines, and it is also specified for the optional EPA36 piston kit. It secures the piston pin in position, helping maintain correct piston-to-connecting-rod alignment and supporting reliable operation under continuous marine loads. |
$ 12.76
-
+
|
|
1-2 weeks delivery time The Bukh 16241-3507-0 oil pump rotor assembly is a precision gear case component for BUKH EPA28 and EPA36 marine engines, built to support stable oil circulation within the oil pump. Replacing a worn rotor helps restore consistent lubrication flow, protecting loaded gear case components and improving operational reliability underway. |
$ 1,318.53
-
+
|
|
1-2 weeks delivery time The Bukh 16241-3693-0 valve seat is a precision seating component used in the gear case on BUKH EPA28 and EPA36 marine installations. It provides a stable sealing surface for the valve, helping the gear case system operate cleanly and consistently when servicing or replacing worn internal valve components. |
$ 56.93
-
+
|
|
1-2 weeks delivery time The Bukh 16241-7335-0 water return pipe is a cooling-system line used to route returning coolant flow on BUKH EPA28 and EPA36 marine diesel engines. Installed within the water flange and thermostat area (and also used at the oil cooler on EPA28), it supports stable coolant circulation and helps the engine maintain correct operating temperature under continuous marine load. |
$ 59.75
-
+
|
|
1-2 weeks delivery time The Bukh 16241-7336-0 pipe band clamp secures pipe connections within key cooling-related assemblies on BUKH EPA28 and EPA36 marine diesel engines. Used in the water flange and thermostat area and on the oil cooler, it helps keep pipework firmly retained to support leak-free, vibration-resistant operation underway. |
$ 17.11
-
+
|
|
1-2 weeks delivery time The Bukh 16241-9569-0 eye joint is a dedicated connection component for the injection pump on BUKH EPA28 and EPA36 marine diesel engines. Installed within the fuel injection pump assembly, it supports a secure, correctly aligned connection point to help maintain dependable fuel system operation under marine running conditions. |
$ 98.79
-
+
|
|
1-2 weeks delivery time The Bukh 16241-9602-0 gear case plug is a sealing plug designed for the gear case on BUKH EPA28, EPA36, and EPA48 drives. It helps keep the gear case properly closed for clean, reliable operation and is well suited as an OEM replacement during service or repair work. |
$ 53.38
-
+
|
|
1-2 weeks delivery time The Bukh 16251-3513-0 oil pump cover is a gear case component for BUKH EPA28 and EPA36 marine propulsion systems, designed to close and protect the oil pump area. It supports reliable lubrication performance by helping keep the oil pump assembly properly enclosed within the gear case environment. |
$ 146
-
+
|
|
1-2 weeks delivery time The Bukh 16251-7303-4 circulation water pump assembly keeps coolant moving through the engine’s cooling circuit on BUKH EPA28 and EPA36 marine diesel engines. Built for the water pump assembly location, it supports stable operating temperature by maintaining consistent coolant flow, helping protect the engine during continuous marine duty. |
$ 1,837.32
-
+
|
|
1-2 weeks delivery time The Bukh 16261-5214-0 fuel pump gasket is a sealing element for the mechanical fuel pump on BUKH EPA28 marine engines. Installed in the fuel pump assembly, it helps maintain a tight joint to prevent fuel seepage and support consistent low-pressure fuel supply, and it is also used as the fuel pump gasket within the optional lower gasket kit. |
$ 35.59
-
+
|
|
1-2 weeks delivery time The Bukh 16261-6556-0 glow plug cord is a dedicated electrical lead used in the nozzle holder and glow plug assembly on BUKH EPA28 marine diesel engines. It provides a secure connection to the glow plug to support reliable preheating for smoother cold starts and consistent combustion during engine warm-up. |
$ 68.36
-
+
|
|
1-2 weeks delivery time The Bukh 16271-0345-0 cylinder head fastening bolt is designed for securing the cylinder head assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps maintain a stable, clamped joint between the head and engine block to support dependable compression sealing and consistent engine operation in marine service. |
$ 101.28
-
+
|
|
1-2 weeks delivery time The Bukh 16271-3209-2 oil filter cartridge is a replacement filter element for the oil filter assembly on BUKH EPA28 and EPA36 marine diesel engines. Designed to support clean oil circulation, it helps protect internal engine components by capturing contaminants and maintaining stable lubrication performance in marine operation. |
$ 65.57
-
+
|
|
1-2 weeks delivery time The Bukh 16281-6551-0 glow plug is a starting-aid heating element for BUKH EPA28 marine diesel engines, fitted within the nozzle holder and glow plug assembly. It supports reliable cold starts by preheating the combustion area, helping the engine fire cleanly and reducing start-up strain on the electrical and fuel systems. |
$ 393.77
-
+
|
|
1-2 weeks delivery time The Bukh 16292-2105-0 piston ring set is a precision ring assembly for the piston and crankshaft group on BUKH EPA28 and EPA36 marine diesel engines. Designed to restore proper sealing in the cylinder, it supports stable compression, controlled oil behavior, and efficient combustion—ideal for rebuilds, routine overhauls, or piston kit work. |
$ 1,106.31
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.