Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 202-07358-F fuel leak-off pipe is a return line used in the fuel connections system on BUKH EPA36 marine diesel engines. It routes excess or leakage fuel back from the injection components in a controlled way, helping keep the fuel system tidy, reliable, and ready for consistent engine operation. |
$ 291.93
-
+
|
|
1-2 weeks delivery time The Bukh 202-08664 front port engine support foot secures the front port-side mounting point on BUKH EPA28 marine engines. Built for stable alignment and vibration control at the engine support assembly, it helps keep the powertrain firmly positioned to protect couplings and driveline components during operation. |
$ 331.90
-
+
|
|
1-2 weeks delivery time The Bukh 202-08665 front starboard engine support foot provides a secure mounting point in the engine support system for BUKH EPA28 marine engines. Designed for the starboard-front position, it helps stabilize the engine on its mounts, supporting proper alignment and reducing unwanted movement under load and vibration. |
$ 331.90
-
+
|
|
1-2 weeks delivery time The Bukh 202-09842-A thick-wall copper fuel line (8 mm) is designed for the fuel connection layout on BUKH EPA28 marine diesel engines. Built to route fuel cleanly and securely between system components, this rigid pipe supports reliable fuel delivery and a tidy, service-friendly installation in the engine’s fuel connections assembly. |
$ 158.03
-
+
|
|
1-2 weeks delivery time The Bukh 202-09842-B thick-wall copper fuel pipe is a rigid 8 mm fuel line designed for the fuel connection assembly on BUKH EPA28 marine diesel engines. Built to route fuel cleanly and securely between fuel system components, it supports dependable flow and helps maintain a tidy, vibration-resistant installation in the engine’s fuel connections area. |
$ 158.03
-
+
|
|
1-2 weeks delivery time The Bukh 202-61350 1 1/2 BSP exhaust flange is a keel-water-cooled exhaust connection flange used on the header tank arrangement for BUKH EPA28, EPA36, and EPA48 engines. It provides a secure interface for the exhaust line, supporting a tight, reliable joint in the exhaust cooling and discharge routing. |
$ 194.48
-
+
|
|
1-2 weeks delivery time The Bukh 202-62160 Super 5 fuel filter mounting bracket secures the fuel filter in the fuel connections assembly on BUKH EPA28 and EPA36 marine diesel engines (Super 5 Standard Heat Exchanger configuration). It provides a stable, service-friendly mounting point that helps keep the fuel system neatly supported for dependable onboard operation. |
$ 536.87
-
+
|
|
1-2 weeks delivery time The Bukh 202-94100 gear cable bracket is a flywheel-housing mounting console for the remote control gear cable on BUKH EPA48 marine engines. It secures and supports the cable run to help maintain clean alignment and dependable shifting control in marine propulsion installations. |
$ 255.59
-
+
|
|
1-2 weeks delivery time The Bukh 202-97630 fuel filter mounting bracket secures the fuel filter in the fuel connections assembly on BUKH EPA48 marine engines. It provides a stable mounting point to help keep fuel lines and the filter properly supported, improving serviceability and maintaining an orderly, reliable fuel system layout onboard. |
$ 258.60
-
+
|
|
1-2 weeks delivery time The Bukh 206-03981 PRM150 DS15 damper plate is a flywheel-housing driveline component for BUKH EPA48 marine engines. Installed at the engine-to-gearbox connection, it helps smooth torsional vibration and provides a controlled transfer of torque, supporting quieter operation and protecting the drivetrain under changing loads. |
$ 2,212.67
-
+
|
|
1-2 weeks delivery time The Bukh 208-62300 flywheel housing is a bell housing unit for the flywheel end of BUKH EPA48 marine diesel engines. It supports correct alignment and protection around the flywheel area, helping maintain a secure, stable interface between the engine and connected drivetrain components in marine service. |
$ 1,936.09
-
+
|
|
1-2 weeks delivery time The Bukh 209-01306 keel-cooled header tank is a dedicated header tank for the BUKH EPA36 cooling system. Designed for keel-cooled installations, it supports stable coolant management by providing a header tank point in the circuit, helping maintain consistent engine operating temperature and reliable long-duration running. |
$ 5,023.52
-
+
|
|
1-2 weeks delivery time The Bukh 209-01789 Super 5 thermostat housing is a cooling-system component used on the header tank arrangement for BUKH EPA28 and EPA36 marine diesel engines. It supports correct thermostat installation and coolant routing, helping the engine reach and maintain the intended operating temperature for dependable performance underway. |
$ 679.02
-
+
|
|
1-2 weeks delivery time The Bukh 209-01926 keel-cooling header tank (BV2203) supports stable coolant level control for BUKH EPA48 marine diesel engines. Installed in the header tank section of the cooling system, it provides a dependable reservoir point for the closed-loop circuit to help maintain consistent engine temperature during operation. |
$ 8,318.59
-
+
|
|
1-2 weeks delivery time The Bukh 209-02167 cast-type filler neck provides a secure, service-friendly coolant fill point for the header tank and related heat exchanger filler neck arrangement used on BUKH BETA, EPA28, EPA36, and EPA48 marine engines. Designed to suit the 209-01 tank filler neck application, it supports clean filling and reliable sealing as part of the engine’s cooling system. |
$ 319.19
-
+
|
|
1-2 weeks delivery time The Bukh 209-02323 13 PSI pressure cap is a cooling-system sealing and pressure-control component for BUKH BETA, EPA28, EPA36, and EPA48 header tanks. By maintaining the correct system pressure, it helps raise the coolant boiling point, supports stable operating temperature, and protects the closed-loop cooling circuit during warm-up and load changes. |
$ 130.89
-
+
|
|
1-2 weeks delivery time The Bukh 209-90290 S3 thermostat housing is a cooling-system component for BUKH EPA48 marine engines, installed at the header tank assembly. It supports correct thermostat mounting and coolant routing, helping the engine reach and maintain stable operating temperature in demanding marine service, and it is suited for pre-20 S3 configurations. |
$ 679.02
-
+
|
|
1-2 weeks delivery time The Bukh 20910-2FH00 engine overhaul gasket kit is a complete sealing set intended for major service work on BUKH R210J marine diesel engines. Used during an engine overhaul, it helps restore proper sealing across key engine joints to control fluid leaks, maintain compression integrity, and support reliable operation after rebuild. |
$ 1,328.20
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.