Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 14331-10130 bushing is a compact mounting component used on BUKH R210J installations for both the engine mount and the alternator. It supports correct fit and alignment while helping to cushion movement and vibration transfer in these mounting points for stable, reliable operation underway. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14331-12160 cylinder block bush is a precision-fit wear component used in the cylinder block of BUKH S270J marine diesel engines. It supports correct alignment of mating parts in the block assembly, helping maintain smooth operation and dependable service life in demanding marine environments. |
$ 2.04
-
+
|
|
1-2 weeks delivery time The Bukh 14331-12180 cylinder block bush is a precision engine component used in the cylinder block of BUKH S270J marine diesel engines. Designed for OEM-fit replacement, it supports correct alignment and controlled wear at its mounting point, helping maintain stable mechanical operation under continuous marine duty. |
$ 6.86
-
+
|
|
1-2 weeks delivery time The Bukh 14720-06806B hose clip is a secure retention component for the fuel line on BUKH S270J marine diesel engines. Designed to hold the hose firmly in place, it supports neat routing, reduces vibration-related movement, and helps maintain a reliable fuel system installation in marine service. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14720-15006B retaining clip secures components across multiple engine assemblies on BUKH R210J and S270J marine diesel engines. Used on the exhaust elbow and pipe, heat exchanger, and expansion tank installations, it helps keep connected parts firmly held in place for reliable operation in a marine environment. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14720-22006B retaining clip secures components in key S270J engine areas, including the timing chain cover, coolant pipe and hose routing, and the expansion tank installation. Designed as an OEM-fit Clip-22, it helps keep the engine bay organized and stable under vibration by holding lines and related hardware in their intended position. |
$ 1.84
-
+
|
|
1-2 weeks delivery time The Bukh 14720-23006 hose clamp secures hose connections in the oil separator system on BUKH S270J marine diesel engines. Designed to maintain a tight, reliable grip, it helps prevent leaks and supports stable crankcase ventilation and oil mist separation under marine operating conditions. |
$ 3.45
-
+
|
|
1-2 weeks delivery time The Bukh 14720-23006B hose clamp secures a hose at the timing chain cover area on BUKH S270J marine diesel engines. Designed for a dependable hold in the engine compartment, it helps maintain proper hose routing and reduces the risk of loosening from vibration and continuous marine operation. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14720-24006B hose clip is a secure retaining component used across multiple BUKH R210J and S270J engine installations, including the coolant pipe and hose routing, the expansion tank area, and the timing chain cover zone. It helps keep hoses and related lines firmly positioned to reduce chafe, prevent vibration-related movement, and support tidy, reliable engine-room routing. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14720-25006B retaining clip is a secure fastening component used across multiple BUKH marine engine assemblies, including the R210J oil pan and expansion tank installations and the S270J coolant pipe and hose routing. It helps keep associated lines and parts properly held in place, supporting tidy installation and reducing the risk of movement from vibration in marine operation. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh Clip-26 retaining clip (14720-26006B) is a practical securing component used across multiple BUKH marine engine installations. It supports neat, vibration-resistant routing by holding lines and related hardware in place on BUKH R210J oil pan applications and on BUKH S270J coolant pipe and hose and expansion tank assemblies. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 14720-28006B retaining clip is a compact fastening component used to secure and support engine hardware on BUKH R210J and S270J marine diesel engines. Installed in the oil pan area on R210J engines and on the coolant pipe and hose routing on S270J engines, it helps keep lines and components properly held in place for clean, reliable installation under vibration. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 15221-0349-0 sealing cap is a dedicated closure component used to seal engine openings on BUKH EPA-series marine diesel engines. Installed in the crankcase on EPA28 and EPA36 engines and on the cylinder head on EPA48 engines, it helps keep the engine internally sealed against oil mist leakage and helps protect the internal space from contamination for clean, reliable operation. |
$ 25.35
-
+
|
|
1-2 weeks delivery time The Bukh 15241-3229-0 pipe joint is a gear case connection component for BUKH EPA36 marine propulsion systems, designed to join and support a pipe run within the gear case assembly. It helps maintain a secure, stable connection so the pipe routing stays correctly aligned and dependable in service. |
$ 117.39
-
+
|
|
1-2 weeks delivery time The Bukh 15261-9601-0 plug is a sealing component used on BUKH EPA-series marine diesel engines, fitted in both the crankcase and cylinder head depending on the engine configuration. It helps close off designated openings in these assemblies to support clean operation and dependable sealing on EPA28, EPA36, and EPA48 installations. |
$ 13.71
-
+
|
|
1-2 weeks delivery time The Bukh 15407-12287B eye bolt is a turbocharger-mounted fastening component for BUKH S270J marine diesel engines. Designed for secure attachment at the turbocharger assembly, it helps maintain stable, reliable connections in a high-vibration marine engine environment. |
$ 10.33
-
+
|
|
1-2 weeks delivery time The Bukh 15471-9153-0 cylinder head stud secures the cylinder head assembly on BUKH EPA48 marine diesel engines. Designed for dependable clamping in the cylinder head joint, it helps maintain a stable, leak-resistant seal under thermal cycling and engine vibration. |
$ 111.85
-
+
|
|
1-2 weeks delivery time The Bukh 15521-9602-0 sealing plug is a crankcase and gear case plug used on BUKH EPA28 and EPA36 marine engines. It helps close off the designated opening in the engine casing, supporting leak control and clean, secure operation in both the crankcase and gear case assemblies. |
$ 53.38
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.