Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 15717-13113 tapered plug is a precision sealing component used in the cylinder block on BUKH S270J marine diesel engines. Designed to close off designated block passages securely, it helps maintain proper fluid containment and supports dependable engine operation in demanding marine service. |
$ 4.28
-
+
|
|
1-2 weeks delivery time The Bukh 15717-21157B tapered plug is a precision sealing component for the cylinder block on BUKH S270J marine diesel engines. It closes a machined port in the block to maintain proper sealing of internal passages, helping protect the engine against leaks and supporting reliable operation in marine service. |
$ 6.86
-
+
|
|
1-2 weeks delivery time The Bukh 15734-18000 sealing cap is a cylinder head sealing component for BUKH S270J marine diesel engines. Installed on the cylinder head, it helps maintain a secure seal in the head assembly, supporting clean operation and dependable engine service in marine conditions. |
$ 2.58
-
+
|
|
1-2 weeks delivery time The Bukh 15734-20000 sealing cap is a dedicated sealing component used across multiple engine areas on BUKH R210J and S270J marine diesel engines. Applied on the R210J cylinder head and camshaft, and on the S270J cylinder block, it helps close off designated openings to maintain proper sealing and support clean, stable engine operation for engines from March 1, 2010 onward. |
$ 3.45
-
+
|
|
1-2 weeks delivery time The Bukh 15734-25000 sealing cap is a cylinder head sealing component for BUKH R210J and S270J marine diesel engines. Designed to secure and seal the specified cylinder head cap location, it helps maintain a tight, leak-resistant closure where the cylinder head assembly requires a sealed cap interface for reliable engine operation. |
$ 3.45
-
+
|
|
1-2 weeks delivery time The Bukh 15734-28000 sealing cap is a cylinder block sealing component for BUKH S270J marine diesel engines. Installed in the cylinder block assembly, it helps close off a machined opening to maintain proper sealing integrity and support clean, reliable engine operation. |
$ 5.18
-
+
|
|
1-2 weeks delivery time The Bukh 15734-30000 sealing cap is a cylinder block sealing component used on BUKH R210J and S270J marine diesel engines. Installed in the cylinder block assembly, it helps close off a machined opening to support proper sealing and dependable engine operation in marine service. |
$ 5.47
-
+
|
|
1-2 weeks delivery time The Bukh 15734-35000 sealing cap is a dedicated sealing component for the cylinder block on BUKH R210J marine diesel engines. Designed to close off and seal a cylinder block port, it helps maintain proper internal sealing integrity and supports clean, reliable engine operation in marine service. |
$ 6.86
-
+
|
|
1-2 weeks delivery time The Bukh 15841-4250-0 fuel leak-off pipe assembly routes injector overflow fuel in the nozzle holder and glow plug area on BUKH EPA28 and EPA36 marine engines. Supplied as an assembly pipe for the leak-off circuit, it supports clean, controlled fuel return and helps keep the injection system installation tidy and service-friendly. |
$ 42.40
-
+
|
|
1-2 weeks delivery time The Bukh 15841-5135-0 mini series bleed screw is a precision fastener used on the injection pump for BUKH EPA28 and EPA36 marine diesel engines. It supports clean, controlled bleeding of trapped air during service, helping restore consistent fuel delivery and reliable starting after filter changes or fuel system work. |
$ 50.56
-
+
|
|
1-2 weeks delivery time The Bukh 15841-9665-0 injection pump gasket with washer-style sealing profile is built to restore a tight seal in the injection pump assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps prevent fuel seepage at the joint, supports stable injection system operation, and is suited for clean, reliable service after maintenance or overhaul. |
$ 9.90
-
+
|
|
1-2 weeks delivery time The Bukh 15841-9666-0 copper washer gasket for the injection pump bleed point helps seal the fuel system on BUKH EPA28 and EPA36 marine diesel engines. Installed within the injection pump assembly, it supports clean, leak-free bleeding and helps maintain stable fuel delivery by securing a tight seal at the bleed fitting. |
$ 7.92
-
+
|
|
1-2 weeks delivery time The Bukh 16011-12000 steel ball is a precision ball element used within the cylinder head assembly on BUKH R210J and BUKH S270J marine diesel engines. Designed to suit OEM fit and function, it supports correct operation of cylinder head mechanisms where a hardened ball component is required for reliable, repeatable movement and sealing action. |
$ 5.18
-
+
|
|
1-2 weeks delivery time The Bukh 16030-5132-0 joint bolt is a securing fastener used in the injection pump assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps keep the injection pump joint firmly clamped, supporting stable alignment and dependable fuel system operation under marine vibration and load. |
$ 98.79
-
+
|
|
1-2 weeks delivery time The Bukh 16060-5101-0 injection pump assembly is built for the fuel injection system on BUKH EPA36 marine diesel engines. This complete pump unit supports accurate fuel delivery to the engine, helping maintain dependable starting, stable running, and consistent performance under varying marine loads. |
$ 10,371.63
-
+
|
|
1-2 weeks delivery time The Bukh 16222-7284-0 adapter is a precision-fit connection component for the water flange and thermostat assembly on BUKH EPA36 marine engines. It supports correct coolant routing through the thermostat housing area, helping the cooling system maintain stable engine operating temperature and dependable circulation in marine service. |
$ 46.17
-
+
|
|
1-2 weeks delivery time The Bukh 16222-8304-0 thermal switch assembly is a temperature-activated control component used in the water flange and thermostat assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps manage temperature-dependent signaling, supporting stable cooling-system operation and dependable engine protection in marine service. |
$ 290.38
-
+
|
|
1-2 weeks delivery time The Bukh 16239-7343-0 water pump gasket is a sealing element for the water pump assembly on BUKH EPA28 and EPA36 marine engines. Designed to restore a tight joint at the pump interface, it helps prevent coolant leakage and supports stable cooling-system performance, and it is also used within the optional lower gasket kit and optional gasket kit arrangements. |
$ 44.54
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.