Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 030D0304 piston ring set is a matched ring pack for the piston and cylinder assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. This set supports strong compression sealing, controlled oil film on the cylinder liner, and stable combustion performance—ideal for restoring correct piston-to-liner sealing during an overhaul. |
$ 275.93
-
+
|
|
1-2 weeks delivery time The Bukh 030D0402 adjusting screw kit provides a secure, service-ready solution for setting and locking mechanical adjustments on BUKH marine engine components. Supplied as a set with adjusting screw 000E0700 and lock nut 000E1089, it helps hold the chosen setting firmly in place under vibration and continuous operation. |
$ 100.28
-
+
|
|
1-2 weeks delivery time The Bukh 030D0607 delivery pump conversion kit supports a dependable upgrade of the fuel supply system on BUKH DV10 and DV20 marine diesel engines, within the specified engine-number ranges. Designed as a conversion solution for the delivery pump arrangement, it helps ensure consistent low-pressure fuel feed to the engine for stable operation and reliable starting. |
$ 718.96
-
+
|
|
1-2 weeks delivery time The Bukh 030D0608 delivery pump conversion kit supports a correct delivery-pump upgrade on BUKH DV10, DV20, and DV24 marine diesel engines within the specified engine-number ranges. Designed for the engine’s fuel supply system, it helps ensure dependable low-pressure fuel feed to the injection equipment for stable starting and consistent running under marine operating conditions. |
$ 410.47
-
+
|
|
1-2 weeks delivery time The Bukh 030D1301 complete oil relief valve is a pressure-regulating component used in the camshaft lubrication circuit alongside the lubricating oil pump and lubricating oil filter on BUKH DV29RME and DV32 marine diesel engines. It helps control oil system pressure by relieving excess pressure, supporting stable lubrication and protecting critical engine components during operation. |
$ 128.57
-
+
|
|
1-2 weeks delivery time The Bukh 030D1302 lubricating oil pump unit, supplied complete with O-rings, restores dependable oil circulation on BUKH DV10, DV20, DV24, DV29, DV29RME, and DV32 marine diesel engines. Installed in the camshaft and lubricating oil pump and filter assembly, it helps maintain stable lubrication flow to protect internal engine components during continuous marine operation. |
$ 1,478.19
-
+
|
|
1-2 weeks delivery time The Bukh 030D4727 coolant circulation pump is a complete pump unit for BUKH DV10, DV20, DV24, DV29, and DV32 marine diesel engines with a 32 mm water connection. It keeps coolant moving through the engine’s cooling circuit to help maintain stable operating temperature and dependable performance at sea, and it replaces earlier pump references 008E4727 and 000E8256. |
$ 1,699.82
-
+
|
|
1-2 weeks delivery time The Bukh 030D5008 clutch plate set is an alternative replacement for the saildrive and the BW7 old-type gearbox clutch pack. Designed to restore positive engagement and smooth power transfer, this plate set supports reliable propulsion performance and is referenced as an alternative to part number 030D5007. |
$ 1,285.67
-
+
|
|
1-2 weeks delivery time The Bukh 030D5947 thermostat cover is a thermostat housing cover for DV8-24 seawater cooling systems, helping secure and protect the thermostat area for stable temperature regulation. Designed for a clean OEM-style fit, it supports reliable coolant flow control so the engine reaches and maintains proper operating temperature in marine service. |
$ 1,074.27
-
+
|
|
1-2 weeks delivery time The Bukh 030D9724 operating unit is a control component used to manage engine operation from the vessel’s control station. Built for marine use and OEM-fit replacement, it supports dependable command of key operating functions for Bukh installations where this operating unit is specified. |
$ 762.84
-
+
|
|
1-2 weeks delivery time The Bukh 031D4201 sealing kit is designed for service work on BUKH DV10ME marine diesel engines, helping restore leak-tight joints during engine maintenance and reassembly. Used as a matched set of seals for the DV10ME platform, it supports dependable operation by keeping critical engine interfaces properly sealed. |
$ 1,047.40
-
+
|
|
1-2 weeks delivery time The Bukh 032D0211 front bearing-cap style front end cover with journals supports accurate crankshaft alignment at the front of the engine while closing and protecting the front end area. Used in the crankcase and front end cover assembly, it is a correct-fit replacement for BUKH DV20, DV24, DV24RME, DV29, DV29RME, and DV32 marine diesel engines. |
$ 2,061.77
-
+
|
|
1-2 weeks delivery time The Bukh 032D0216 crankcase unit, complete with cylinder lining and rear main bearing liner, forms the structural foundation of the engine for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used in the crankcase and front end cover assembly, it supports precise alignment of internal rotating components while providing a robust housing designed for dependable marine operation. |
$ 8,671.55
-
+
|
|
1-2 weeks delivery time The Bukh 032D0411 rocker arm shaft is a valve train component for BUKH DV20 marine diesel engines, supporting smooth, accurate rocker arm movement to maintain consistent valve operation. Built for OEM-style fit in the cylinder head assembly, it helps preserve stable engine performance and dependable top-end operation. |
$ 462.85
-
+
|
|
1-2 weeks delivery time The Bukh 032D4201 gasket set is a sealing kit for BUKH DV20 marine diesel engines, intended for service work where multiple gaskets are replaced together. It helps restore tight, leak-resistant joints across the engine’s mating surfaces, supporting reliable operation after maintenance or overhaul. |
$ 1,361.64
-
+
|
|
1-2 weeks delivery time The Bukh 032D4202 cylinder head gasket set is designed for sealing the cylinder head on BUKH DV20 marine diesel engines. It supports dependable compression sealing and helps maintain a tight, stable joint between the head and engine block—ideal for quality repairs during head removal or overhaul work. |
$ 521.86
-
+
|
|
1-2 weeks delivery time The Bukh 032D4215 complete gasket set provides a comprehensive sealing solution for BUKH DV24, DV29, and DV32 marine diesel engines. Designed for dependable reassembly during servicing and overhauls, it helps restore tight joints across key engine interfaces to control leaks and maintain proper engine integrity in marine operation. |
$ 1,186.87
-
+
|
|
1-2 weeks delivery time The Bukh 032D6303 water pump repair kit is designed to support reliable maintenance of your Bukh water pump by providing a matched set of service parts for a proper overhaul. Ideal for restoring cooling-system dependability, this kit helps keep coolant circulation consistent and reduces the risk of downtime caused by worn water-pump components. |
$ 373.91
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.