Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 00500-BS122 intake manifold adapter is a dedicated connection component for the intake manifold system on BUKH S270J marine diesel engines. It helps create a secure, correctly aligned interface within the air intake path, supporting smooth airflow delivery to the engine for consistent running and dependable marine performance. |
$ 1,167.40
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS124 air filter connector is a dedicated intake connection component for the BUKH S270J engine air filter assembly. It helps route and secure the airflow path to the filter, supporting a tight, stable installation that promotes clean, consistent air delivery to the engine. |
$ 1,167.40
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS141 intake pipe is a dedicated air-intake connection for the intercooler on BUKH S270J marine diesel engines. Designed to route charge air cleanly and securely through the intercooler assembly, it supports stable airflow, proper system sealing, and dependable boost-air delivery in demanding marine operation. |
$ 502.02
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS151 intake manifold cover is a closing cover designed for the intake manifold on BUKH S270J marine diesel engines. Positioned as part of the air intake assembly, it helps maintain a secure, well-sealed manifold setup for dependable engine breathing and consistent operation. |
$ 46.63
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS152 support closer cover is a dedicated intake manifold cover for BUKH S270J marine diesel engines. Designed to protect and close off the relevant intake manifold section, it helps maintain a secure, well-contained intake assembly for reliable engine operation in marine service. |
$ 88.80
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS170 air filter element is a dependable intake filtration component for BUKH S270J marine diesel engines. Designed for the engine air filter assembly, it helps keep airborne dirt and salt-laden particles out of the intake path, supporting stable combustion and protecting internal engine components in marine service. |
$ 537.25
-
+
|
|
1-2 weeks delivery time The Bukh 00500-BS191 sealing O-ring is made to secure a tight, leak-resistant joint in the intercooler assembly on BUKH S270J marine diesel engines. Installed where intercooler components mate, it helps maintain correct air-charge cooling performance and supports stable engine operation in harsh marine environments. |
$ 4.64
-
+
|
|
1-2 weeks delivery time The Bukh 00600-2R133 exhaust bellows is a flexible connector used in the exhaust elbow and pipe assembly on BUKH R210J marine diesel engines. Designed to accommodate movement and vibration in the exhaust run, it helps maintain a secure, properly aligned exhaust connection for dependable operation onboard. |
$ 532.50
-
+
|
|
1-2 weeks delivery time The Bukh 00600-BS1C2 left-hand exhaust pipe heat protector is designed for the exhaust manifold area on BUKH S270J marine diesel engines. Positioned to shield surrounding components from exhaust-pipe heat, it supports safer engine-room operation and helps reduce heat exposure around the exhaust routing on the left-hand side. |
$ 1,307.55
-
+
|
|
1-2 weeks delivery time The Bukh 00700-2R103 accelerator position sensor assembly is a control-system component for BUKH R210J marine engines, designed to monitor throttle demand and support accurate engine response. Built to suit the R210J control setup, it helps maintain smooth, predictable acceleration input for dependable operation underway. |
$ 545.90
-
+
|
|
1-2 weeks delivery time The Bukh 00700-5S123 accelerator position sensor assembly provides accurate throttle position feedback for the control system on BUKH R210J and S270J marine diesel engines. Designed as a direct replacement for earlier part number 00110-5S102, it supports smooth throttle response and stable engine control by delivering a consistent accelerator position signal. |
$ 1,804.70
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS110 ECU case is a dedicated housing component for the ECU and case assembly on BUKH S270J marine diesel engines. It helps protect the engine control electronics in the marine environment, supporting secure installation and dependable operation of the engine management system. |
$ 817.14
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS115 upper ECU damper bracket secures and supports the ECU mounting within the ECU and case assembly on BUKH S270J marine diesel engines. Built to help stabilize the control unit against engine and hull vibration, it promotes reliable ECU retention and consistent electrical system performance in marine operation. |
$ 116.73
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS116 lower ECU damper bracket is a mounting component for the ECU and case assembly on BUKH S270J marine diesel engines. It supports secure ECU installation while helping isolate vibration, protecting the control unit and improving durability in the marine engine environment. |
$ 116.73
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS150 main bracket is a structural mounting component for BUKH S270J marine diesel engines. Designed to provide stable support within the main bracket arrangement, it helps keep attached engine hardware securely positioned and aligned in demanding onboard conditions. |
$ 4,669.57
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS155 shift cable support bracket secures and stabilizes the shift cable routing on BUKH S270J marine engines within the power steering assembly. By holding the cable in the correct position, it helps maintain smooth, consistent shift operation and reduces unwanted movement from vibration and engine motion. |
$ 233.42
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS156 support bracket secures the accelerator position sensor within the control system on BUKH S270J marine diesel engines. By keeping the sensor firmly aligned and protected from vibration-related movement, it helps maintain stable throttle signal pickup for smooth, predictable engine response. |
$ 163.46
-
+
|
|
1-2 weeks delivery time The Bukh 00700-BS157 upper ECU box support bracket secures the ECU box within the power steering installation on BUKH S270J marine engines. Designed to provide stable mounting and vibration-resistant support, it helps keep the control hardware properly positioned for reliable operation in marine conditions. |
$ 93.40
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.