Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 022D6614 fittings assembly supports the coolant water heater and spring-start arrangement on BUKH DV24, DV29, and DV32 marine diesel engines. Designed to integrate into the heater circuit, it helps ensure correct connection and operation of the coolant heating setup for dependable temperature management and starting support. |
$ 658.47
-
+
|
|
1-2 weeks delivery time The Bukh lifting bracket is designed for DV36 and DV48 marine engine handling and installation applications. |
$ 265.97
-
+
|
|
1-2 weeks delivery time The Bukh 023D1208 heat exchanger conversion kit upgrades the cooling system on BUKH DV36 and DV48 marine diesel engines by converting it from single-circuit to dual-circuit cooling. Designed for a clean, service-friendly retrofit, it supports more controlled temperature management by separating the engine’s coolant loop from the seawater cooling side. |
$ 9,731.97
-
+
|
|
1-2 weeks delivery time The Bukh hand pump is designed for marine engine auxiliary system service applications. |
$ 998.37
-
+
|
|
1-2 weeks delivery time The Bukh 023D1314 lubricating oil heating element is a 42V, 300W heater made for the lubrication system on BUKH DV36 marine diesel engines. It warms engine oil to support easier starts and faster oil circulation, helping reduce cold-start wear and promoting stable lubrication during warm-up. |
$ 4,598.76
-
+
|
|
1-2 weeks delivery time The Bukh 023D1315 electronic lubricating-oil thermostat is a control component used in the lubricating oil heating system and is required for all lubricating oil heaters. It helps regulate oil heating control for dependable warm-up support and stable operation in marine engine installations. |
$ 646.05
-
+
|
|
1-2 weeks delivery time The Bukh 023D2107 deluxe dashboard kit provides a clean, upgraded helm control and instrument interface for BUKH DV36, DV48, EPA28, EPA36, and EPA48 marine engines. Supplied with a 5.5 meter wiring harness, this new-version dashboard supports a tidy installation and reliable signal routing between the engine and the control station. |
$ 2,565.50
-
+
|
|
1-2 weeks delivery time The Bukh electric mains assembly is intended for marine engine electrical supply and connection applications. |
$ 406.72
-
+
|
|
1-2 weeks delivery time The Bukh 023D3116 spray pump kit is a complete service kit for the EPA48 spray pump system, built to restore dependable seawater delivery where a controlled spray is required in marine operation. Ideal for maintenance or overhaul work, it helps keep the spray circuit functioning smoothly for consistent cooling and protection of connected components. |
$ 6,268.64
-
+
|
|
1-2 weeks delivery time The Bukh 023D3117 spray pump assembly is built for BUKH DV36 and DV48 marine diesel engines, supporting the engine’s spray-pump function as part of the onboard system. This unit is supplied for ordering together with a new engine, helping ensure correct configuration for the engine build and installation. |
$ 5,639.42
-
+
|
|
1-2 weeks delivery time The Bukh 023D3120 complete spray pump assembly is a ready-to-install pump unit for BUKH EPA 28 and EPA 36 marine engines, supplied as a complete assembly to support dependable spray delivery within the engine’s system. This item is only orderable together with a new engine; for separate delivery, please use the spare parts price list. |
$ 6,446.65
-
+
|
|
1-2 weeks delivery time The Bukh 023D3121 spray pump kit supports dependable water delivery in the spray pump system for BUKH EPA28-36 marine engines. Supplied as a kit for service and overhaul work, it helps restore proper pump operation to maintain reliable water flow for the engine’s marine cooling and related onboard systems. |
$ 10,139.50
-
+
|
|
1-2 weeks delivery time The Bukh additional parts kit is designed for DV36 marine engine service and installation applications. |
$ 2,724.78
-
+
|
|
1-2 weeks delivery time The Bukh spare parts kit is designed for Hyundai marine engine service and maintenance applications. |
$ 1,240.37
-
+
|
|
1-2 weeks delivery time The Bukh 1000-hour service kit is intended for scheduled DV36 marine diesel maintenance applications. |
$ 493.97
-
+
|
|
1-2 weeks delivery time The Bukh 1000-hour service kit is designed for scheduled Beta75 marine engine maintenance applications. |
$ 477.39
-
+
|
|
1-2 weeks delivery time The Bukh 4 m exhaust rubber hose kit is intended for marine diesel exhaust system installation applications. |
$ 972.84
-
+
|
|
1-2 weeks delivery time The Bukh 023D6203 starter assembly combines spring start and electric start functionality for BUKH DV36 and DV48 marine diesel engines. Designed for dependable engine starting in marine service, it supports both manual spring-assisted starting and electric cranking as part of the engine’s starting system, and is intended to be ordered together with a new engine. |
$ 10,207.40
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.