Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 020D9718 cable set includes two 5000 mm cables for marine system wiring and service work where extended cable length is required. Supplied as a matched two-piece set, it supports clean routing, dependable connections, and straightforward replacement in onboard electrical installations. |
$ 557.98
-
+
|
|
1-2 weeks delivery time The Bukh top mount control with bent handle is intended for marine engine throttle and shift control applications. |
$ 598.77
-
+
|
|
1-2 weeks delivery time The Bukh 020D9723 two-piece 6000 mm cable set is a practical replacement solution for longer cable runs in Bukh marine installations. Supplied as two matching cables, it helps restore reliable connections and tidy routing where full-length reach is required. |
$ 590.53
-
+
|
|
1-2 weeks delivery time The Bukh white SOLAS dashboard is designed for R210 and S270 marine engine instrument panel applications. |
$ 8,019.39
-
+
|
|
1-2 weeks delivery time The Bukh centrifugal weight set is intended for marine diesel governor or rotating assembly service applications. |
$ 404.34
-
+
|
|
1-2 weeks delivery time The Bukh 022D1308 oil pan heater is a 42V, 85W heating element designed for the oil pan on BUKH DV24 marine diesel engines. It helps warm engine oil for easier cold starts and smoother initial lubrication, supporting dependable operation in low-temperature conditions. |
$ 4,246.31
-
+
|
|
1-2 weeks delivery time The Bukh 022D1310 lubricating oil heater assembly (42 V) supports the DV32 engine lubrication system by warming the lubricating oil to promote easier circulation and more stable operation in cold-start conditions. Designed for BUKH DV32 marine diesel engines, it helps reduce start-up wear and improves readiness when the engine is brought online. |
$ 4,246.31
-
+
|
|
1-2 weeks delivery time The Bukh 022D2503 raised rear hand-start component is built for the rear hand-start arrangement, supporting dependable manual starting where a raised rear-mounted setup is used. It is a practical replacement part for maintaining a secure, consistent hand-start function on Bukh marine diesel installations. |
$ 3,354.41
-
+
|
|
1-2 weeks delivery time The Bukh 022D3115 spray pump assembly supports the engine’s spray system on BUKH DV24, DV29, and DV32 marine diesel engines. Designed as an OEM supply unit, it helps deliver consistent spray flow where required within the engine, supporting dependable operation in demanding marine service. This item is orderable only together with a new engine; for separate supply, use the spare parts price list. |
$ 5,850.44
-
+
|
|
1-2 weeks delivery time The Bukh spray pump kit is designed for servicing DV24, DV29, and DV32 marine engine systems. |
$ 8,296.03
-
+
|
|
1-2 weeks delivery time The Bukh 022D3116A attachment kit is designed to support installation of fire pump 022D3116 on BUKH DV24, DV29, and DV32 marine diesel engines. Built as a dedicated mounting and fitting set, it helps secure correct pump placement and dependable operation when a fire-fighting pump is integrated into the engine setup. |
$ 985.20
-
+
|
|
1-2 weeks delivery time The Bukh 022D4102 rear starting handle is a manual engine-start component designed for Bukh marine diesel installations that use a rear-mounted starting handle arrangement. It provides a practical way to turn the engine over by hand for starting support, priming, or emergency operation, making it a dependable replacement part for onboard readiness. |
$ 237
-
+
|
|
1-2 weeks delivery time The Bukh 022D4224 tool and standard and special part set is a purpose-built service kit for BUKH DV24 RME engines. Designed to support correct maintenance and repair tasks, this set brings together the required tools and special parts to help technicians carry out engine work efficiently and consistently. |
$ 1,927.46
-
+
|
|
1-2 weeks delivery time The Bukh 022D4311 water-cooled exhaust manifold is a purpose-built manifold unit for the exhaust system on BUKH DV24 marine diesel engines. By routing exhaust gases through a water-jacketed casting, it helps control under-engine temperatures and supports safe, efficient exhaust flow in marine installations. |
$ 294
-
+
|
|
1-2 weeks delivery time The Bukh 022D6202 combined spring-start and electric-start assembly supports dependable engine starting on BUKH DV24, DV29, and DV32 marine diesel engines. Designed for the starting system, it provides both manual spring-assisted starting capability and electric starter operation to suit different onboard power and operating conditions, and it is supplied for ordering together with a new engine. |
$ 10,590.02
-
+
|
|
1-2 weeks delivery time The Bukh 022D6207 automatic hydraulic start assembly is a complete starting-system unit for BUKH DV24, DV29, and DV32 marine diesel engines. Designed to support dependable engine start-up in marine service, it integrates into the hydraulic starting arrangement as an OEM-matched replacement assembly, with ordering designated for supply with a new engine. |
$ 63,752.08
-
+
|
|
1-2 weeks delivery time The Bukh 022D6208 spring starter assembly is a mechanical starting-system component for BUKH DV24, DV29, and DV32 marine diesel engines. Built to support dependable manual starting through stored spring energy, it provides a practical solution for vessels that rely on a robust, self-contained start arrangement. This assembly is only available when ordered with a new engine; for separate supply, use the spare parts price list. |
$ 9,861.89
-
+
|
|
1-2 weeks delivery time The Bukh 022D6209 spring starter is a spring-powered starting component for Bukh marine engine starter systems. Designed to deliver dependable cranking power through stored mechanical energy, it supports confident engine starting and provides a robust OEM replacement option in demanding onboard operating conditions. |
$ 9,002.47
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.