Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 030D5013 gearbox kit for the Baysan M60 with a 2.5:1 ratio is a complete kit intended for servicing or replacing the marine reduction gearbox setup. Designed around the Baysan M60 gearbox specification, it supports dependable power transmission and correct reduction ratio matching for marine propulsion drivetrains. |
$ 6,839.98
-
+
|
|
1-2 weeks delivery time The Bukh 030D5020 transmission conversion kit upgrades a 2-cylinder marine engine installation from an older BW7/Baysan gearbox to a PRM125A transmission with a 3:1 ratio. Designed to streamline repower and drivetrain modernization work, this kit supports a cleaner conversion path while highlighting the changed installation requirement that the engine must be mounted 10 mm higher, in line with Bukh technical information SI1703_2. |
$ 6,839.98
-
+
|
|
1-2 weeks delivery time The Bukh 030D5021 transmission conversion kit upgrades 2-cylinder BUKH installations by converting from the older BW7 gearbox to the newer PRM125A with a 2.5:1 ratio. Designed to support a clean drivetrain modernization, it provides a practical path to a current gearbox setup while accounting for the changed installation position, including the requirement to mount the engine 10 mm higher as referenced in Bukh technical information si1703_2. |
$ 6,839.98
-
+
|
|
1-2 weeks delivery time The Bukh 030D6508 keel cooling pipe is a 1574mm cooling line designed for marine keel cooling systems. Built for dependable coolant circulation through the keel cooler circuit, it supports stable engine operating temperatures and is well-suited for replacement during cooling-system service or refits. |
$ 1,890.17
-
+
|
|
1-2 weeks delivery time The Bukh 030D6510 keel cooling pipe is a dedicated cooling-system line for BUKH EPA 28 marine diesel engines, used to route coolant through the keel-cooling circuit for steady temperature control under continuous load. Supplied in a 1270 mm length, this pipe supports a clean, engine-matched installation and is intended to be ordered together with a new engine. |
$ 1,525.43
-
+
|
|
1-2 weeks delivery time The Bukh U-type keel cooling pipe is intended for marine engine keel cooling system applications. |
$ 2,296.78
-
+
|
|
1-2 weeks delivery time The Bukh 030D6514 keel cooling pipe assembly (1150 mm) is designed for the keel-cooling circuit on BUKH EPA 28 and EPA 36 marine engines, providing a dedicated coolant flow path for stable temperature control during continuous operation. This item is supplied only when ordered with a new engine; for separate supply, use the spare parts price list selection. |
$ 2,531.63
-
+
|
|
1-2 weeks delivery time The Bukh U-type keel cooling pipe is intended for marine engine keel cooling system applications. |
$ 1,887.35
-
+
|
|
1-2 weeks delivery time The Bukh 030D6518 keel-cooling pipe assembly is a dedicated cooling-system line for BUKH EPA 28, EPA 36, and EPA 48 marine diesel engines. With a 955 mm length, it supports the keel-cooling circuit by routing coolant through the system for stable operating temperatures and dependable heat management on board. |
$ 2,035.15
-
+
|
|
1-2 weeks delivery time The Bukh 030D6560 two-circuit circulation pump is a cooling-system pump designed for BUKH DV36 marine diesel engines, helping keep coolant moving through a dual-circuit setup for stable operating temperature control. Supplied as a direct replacement for the earlier part number 008E6560, it supports dependable cooling performance for marine duty. |
$ 3,394.38
-
+
|
|
1-2 weeks delivery time The Bukh automatic stern tube lubrication system is intended for marine stern tube maintenance applications. |
$ 137.99
-
+
|
|
1-2 weeks delivery time The Bukh cooling water pump is intended for marine diesel engine cooling system applications. |
$ 1,315.10
-
+
|
|
1-2 weeks delivery time The Bukh painted double starter bracket is designed for marine engine starter mounting applications. |
$ 3,581.59
-
+
|
|
1-2 weeks delivery time The Bukh 031D4202 cylinder head gasket set is designed for BUKH DV10ME marine diesel engines, supporting a secure seal between the cylinder head and engine block. Used during cylinder head service, this set helps maintain proper compression and keeps combustion gases, coolant, and lubricating oil separated for dependable engine operation. |
$ 372.82
-
+
|
|
1-2 weeks delivery time The Bukh 032D1308 lubricating oil heater is a 42 V, 85 W heating element designed for the lubrication system on BUKH DV24 and DV29 marine diesel engines. By warming the lubricating oil, it supports smoother starts and more consistent oil flow during cold conditions, helping protect critical engine components from start-up wear. |
$ 4,598.76
-
+
|
|
1-2 weeks delivery time The Bukh 032D1310 lubricating oil heater is a 42V, 85W heating element for BUKH DV32 marine diesel engines, designed to warm the lubrication oil for easier starting and smoother operation in cold conditions. Installed in the lubricating oil system, it helps reduce start-up wear by promoting faster oil flow and more consistent lubrication during preheat and initial running. |
$ 4,790.41
-
+
|
|
1-2 weeks delivery time The Bukh 032D1402 complete return line kit restores a clean, leak-resistant return circuit on BUKH DV24, DV29, and DV32 marine diesel engines. Supplied as a complete set with the leak oil pipe, banjo bolts, hollow screw, nipple, and sealing gaskets, it supports correct routing and secure sealing of the return line connections during service or overhaul. |
$ 366.29
-
+
|
|
1-2 weeks delivery time The Bukh 032D2213 start pilot unit is a dedicated starting-aid component for BUKH DV24 and DV32 marine diesel engines, supporting more confident cold starts and smoother engine pickup during cranking. This part replaces the earlier 022D2211 reference and is intended for installation in the engine starting system where a start pilot device is used. |
$ 1,777.55
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.