Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 009R2010 R1/8 locking screw plug is a threaded closure fastener used to securely seal an R1/8 port in Bukh marine engine and onboard system assemblies. It helps prevent fluid or pressure leakage at service points and supports clean, reliable maintenance work with an OEM-style fit. |
$ 57.35
-
+
|
|
1-2 weeks delivery time The Bukh 009R6010 capsule nut is a protective fastening component used to secure threaded studs and bolts while shielding exposed threads in marine environments. Its capped design helps support clean, reliable assemblies on Bukh equipment where a closed-end nut is preferred for safety, durability, and a finished installation. |
$ 15.36
-
+
|
|
1-2 weeks delivery time The Bukh DIN120 flange is designed for marine gearbox and shaft connection applications. |
$ 861.85
-
+
|
|
1-2 weeks delivery time The Bukh 01-42401 cover gasket is a sealing element for the F5B cover, designed to help maintain a tight, leak-resistant joint where the cover meets its mating surface. Matched to Bukh reference 610G0503, it supports clean, reliable operation by keeping fluids contained and protecting the assembly from air or moisture ingress. |
$ 8.63
-
+
|
|
1-2 weeks delivery time The Bukh accelerator position sensor assembly is designed for marine engine throttle control applications. |
$ 1,497.38
-
+
|
|
1-2 weeks delivery time The Bukh trim wiring assembly is designed for marine trim system electrical connection applications. |
$ 488.30
-
+
|
|
1-2 weeks delivery time The Bukh digital instrument panel is designed for marine engine monitoring and control applications. |
$ 919.83
-
+
|
|
1-2 weeks delivery time The Bukh 020D2141 tachometer with cable is an engine speed gauge kit supplied with a 5.5 m cable for BUKH DV24, DV29, and DV32 marine diesel engines. Designed to transmit engine speed to the instrument for clear RPM monitoring at the helm, it supports accurate operation, smoother throttle control, and dependable engine management underway. |
$ 1,653.88
-
+
|
|
1-2 weeks delivery time The Bukh 020D2142 speedometer kit with 5.5 m cable provides a reliable mechanical readout for BUKH DV36, DV48, EPA28, EPA36, and EPA48 marine diesel engines. Supplied as a speedometer with matching cable, it supports accurate monitoring at the helm for confident engine operation and routine checks underway. |
$ 1,653.88
-
+
|
|
1-2 weeks delivery time The Bukh control board is designed for marine engine control system applications without instruments. |
$ 487.17
-
+
|
|
1-2 weeks delivery time The Bukh 020D2165 SOLAS instrument panel is an updated panel assembly for Bukh DV series and Beta series marine engines, supplied as the new version referenced to Service Information 1204. Designed to support clear, standardized engine instrumentation in SOLAS-focused installations, it provides a straightforward replacement option when updating or renewing the vessel’s engine control and monitoring station. |
$ 1,580.16
-
+
|
|
1-2 weeks delivery time The Bukh 020D2166 deluxe dashboard is an instrument panel solution for BUKH DV24, DV29, and DV32 marine diesel engines, providing a clean, organized station for engine monitoring and control. Designed as a dedicated dashboard assembly, it supports reliable operator oversight of key engine functions from the helm. |
$ 2,690.73
-
+
|
|
1-2 weeks delivery time The Bukh 020D2322 freshwater-cooling temperature sensor helps maintain dependable engine temperature control in BUKH single-circuit cooling installations. Fitted in the freshwater cooling circuit, it provides the temperature signal needed for monitoring and protection, supporting stable operating conditions and reliable marine service. |
$ 427.98
-
+
|
|
1-2 weeks delivery time The Bukh 020D4103 starting crank is a manual starting tool for BUKH DV10 and DV20 marine diesel engines, providing a dependable way to turn the engine over during servicing or when conventional starting support is unavailable. It is the updated replacement for the earlier article number 008E0059 and is intended to match the original Bukh fit and function. |
$ 547.72
-
+
|
|
1-2 weeks delivery time The Bukh 020D4105 tool kit is a practical service kit intended for maintenance work on Bukh marine equipment. Ideal for onboard use or workshop servicing, it helps keep routine repairs and adjustments organized with a single, dedicated kit matched to Bukh applications. |
$ 288.63
-
+
|
|
1-2 weeks delivery time The Bukh marine air filter is intended for marine diesel intake air filtration applications. |
$ 486.56
-
+
|
|
1-2 weeks delivery time The Bukh cabin heater is designed for onboard heating applications with 42V 150W electrical supply. |
$ 1,689.13
-
+
|
|
1-2 weeks delivery time The Bukh control cable set is intended for marine throttle and shift control system installation applications. |
$ 508.29
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.