Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 000C1508 stop solenoid spring is a precision spring used within the stop solenoid on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports correct solenoid movement and return action to help ensure dependable engine shutdown control and consistent operation of the stop mechanism. |
$ 24.09
-
+
|
|
1-2 weeks delivery time The Bukh 000C8679 zinc rod plug is a sealing component fitted in the crankcase and front end cover on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to close off the zinc rod port securely, it supports clean, leak-controlled operation and makes routine corrosion-protection service straightforward with an OEM-correct fit. |
$ 36.96
-
+
|
|
1-2 weeks delivery time The Bukh 000D8496 cylinder head sealing gasket is designed for the BUKH DV10ME engine’s cylinder head joint, helping maintain proper compression while sealing coolant and oil passages between the cylinder head and engine block. It’s an OEM-grade replacement choice for dependable head-to-block sealing in marine service. |
$ 127.16
-
+
|
|
1-2 weeks delivery time The Bukh 000D8497 pre-chamber gasket is a sealing element designed for the engine pre-chamber area, helping maintain proper combustion sealing and stable engine operation. As a precise replacement gasket, it supports clean assembly and dependable sealing where the pre-chamber interfaces with surrounding components. |
$ 26.70
-
+
|
|
1-2 weeks delivery time The Bukh 000D8504 special locking nut is a secure, engine-internal fastener used within the crankshaft and rotating assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to hold critical components firmly in place under vibration and cyclic loads, it supports reliable alignment and long service life across the crankshaft, bearing, connecting rod, piston, and cylinder liner assembly group. |
$ 192.87
-
+
|
|
1-2 weeks delivery time The Bukh 000D8505 special locking plate is a secure locking element used in the crankshaft and rotating-assembly area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to help keep critical fasteners locked in position, it supports dependable retention for components within the crankshaft, bearing, connecting rod, piston, and cylinder liner assembly group during continuous marine operation. |
$ 42.57
-
+
|
|
1-2 weeks delivery time The Bukh 000D8619 threaded plug provides a secure seal for critical oil and camshaft-related passages on BUKH DV29RME and DV32 marine diesel engines. Used within the camshaft and lubrication system area, it helps maintain proper lubricating oil containment around the lubricating oil pump and lubricating oil filter circuits for dependable engine operation. |
$ 26.52
-
+
|
|
1-2 weeks delivery time The Bukh 000D8836 front gearwheel is a precision drivetrain component used in the crankshaft and rotating assembly of BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports accurate gear-to-gear timing and dependable power transfer within the front gear train, helping keep the engine’s internal rotation synchronized for smooth, reliable operation. |
$ 581.77
-
+
|
|
1-2 weeks delivery time The Bukh 000D9127 valve cover sealing gasket is designed for BUKH DV10ME marine diesel engines, forming a tight seal between the valve cover and the cylinder head. It helps prevent oil seepage, supports clean operation in the top end, and is a practical OEM-style replacement when servicing the valve train area. |
$ 81.15
-
+
|
|
1-2 weeks delivery time The Bukh 000D9196 sealing gasket (reference 39196) is designed for the crankcase and front end cover joint on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed between mating surfaces, it helps maintain a tight seal to support clean, reliable engine operation and proper protection of the front end and crankcase area. |
$ 34.56
-
+
|
|
1-2 weeks delivery time The Bukh 000D9197 sealing gasket (reference 39197) is designed for the rear end cover and rotating weights area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed as part of the end cover sealing stack, it helps maintain a tight joint to reduce leakage and protect internal components during continuous marine operation. |
$ 38.57
-
+
|
|
1-2 weeks delivery time The Bukh 000D9227 journal is a precision support component used across key mechanical assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the governor and regulating handle system and, on DV24RME engines, within the camshaft and lubricating oil pump and filter assembly, it helps maintain controlled movement and stable alignment for dependable regulation and lubrication performance. |
$ 19.96
-
+
|
|
1-2 weeks delivery time The Bukh 000D9261 center main bearing standard shell set supports stable crankshaft rotation in the crankshaft and bearing assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Supplied as a matched pair of bearing shells (one smooth and one with a groove and bore), it helps maintain correct oil distribution and bearing support for reliable bottom-end operation. |
$ 225.36
-
+
|
|
1-2 weeks delivery time The Bukh 000D9309 pipe collar is a securing clamp used on BUKH DV24RME, DV29RME, and DV32 marine diesel engines in assemblies including the governor and regulating handle and the camshaft lubrication group. It helps keep piping properly supported and aligned, reducing movement and supporting reliable operation of related engine control and lubrication components. |
$ 200.38
-
+
|
|
1-2 weeks delivery time The Bukh 000D9312 sealing gasket is designed for key engine assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines, including the governor and regulating handle area and, on DV24RME, the camshaft, lubricating oil pump, and lubricating oil filter. It helps maintain a tight seal across mating surfaces to support clean operation and dependable engine performance. |
$ 16.09
-
+
|
|
1-2 weeks delivery time The Bukh 000D9417 spring is a precision engine component used in the camshaft and lubricating oil system on BUKH DV29RME and DV32 marine diesel engines. Installed within the camshaft, lubricating oil pump, and lubricating oil filter assemblies, it provides the required spring force to support stable operation and dependable lubrication performance underway. |
$ 10.43
-
+
|
|
1-2 weeks delivery time The Bukh 000D9462 centrifugal governor spring is a precision control component used in the camshaft, lubricating oil pump, and lubricating oil filter assembly on BUKH DV29RME and BUKH DV32 marine diesel engines. It supports stable governor operation for dependable engine speed control, helping the engine respond smoothly to load changes underway. |
$ 24.09
-
+
|
|
1-2 weeks delivery time The Bukh 000D9507 axial stop screw is a precision fastener used as a bearing stop point in key control and timing-related assemblies on BUKH DV24RME, DV29RME, and DV32 marine engines. Installed in locations including the governor and regulating handle and, on DV24RME, the camshaft, lubricating oil pump, and lubricating oil filter group, it helps maintain correct axial positioning for stable operation and consistent adjustment. |
$ 82.75
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.