The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 18753-0606 replacement motor is a 24 Volt DC spare part intended for Jabsco equipment, supporting dependable electrical drive replacement where a compatible DC motor is required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0609 bowl spud and barbed adaptor accessory upgrades Jabsco Series toilet installations with a 19 mm (3/4 in) barbed adaptor. It is listed as compatible with the 37075 Series and 37275 Series, helping enhance performance and functionality of the marine toilet system. This Jabsco spare part is noted as no longer available, with Jabsco 58107-1000 referenced as the closest replacement.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-5032 pressure control switch provides precise pressure regulation up to 60 psi for water system setups, supporting reliable and efficient operation in industrial or residential applications. Built for demanding environments, it delivers consistent performance to help maintain optimal pressure levels where accuracy and durability matter.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18840-0010 self-priming engine cooling pump is a bronze flexible impeller unit supplied with a 6-1/2 inch diameter A belt pulley for dependable marine and industrial cooling duty. It uses a neoprene impeller with a carbon/ceramic mechanical seal, features 1 inch hose ports, and delivers a nominal 8.9 gallons per minute (33 liters per minute) at 1500 rpm while self-priming from dry up to 2.4 m (7.8 ft). Designed for liquids from 45°F to 180°F, it is intended to run lubricated by water and should not be run dry for more than 30 seconds to protect impeller life.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18914-6340 pumphead assembly is a durable Santoprene/EPDM replacement unit built for 3C S/E applications and rated to handle pressures up to 40 PSI. Designed as a spare part for Jabsco pump systems, it supports compatibility across the 31600, 31620, and 31630 model lineups while keeping service and maintenance straightforward.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18916-0025 pressure control switch (model 0292/94) is a dependable component built for accurate pressure regulation in various applications, suitable for both replacement and new installations. Rated at 25 psi and specified as a spare part for Jabsco (for lower pump), it supports durable, consistent pressure control; this part is noted as no longer available, with Jabsco 44814-1000 listed as an alternative.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18916-1070 pressure control switch provides precise on/off regulation for water pump systems with a 70 PSI activation setting to help prevent excessive cycling and maintain consistent pressure. It supports 12V and 24V DC installations and is recommended for freshwater and saltwater applications across marine, RV, and residential water systems. Built for durability with corrosion-resistant components, it is designed for demanding environments and includes an adjustment mechanism for custom pressure settings.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18920-9053 pump service kit is a maintenance solution for Jabsco 31750 and 31755 series pumps, supplying key parts to restore efficient operation in bilge and wastewater applications. It includes a diaphragm, valve kit, lower housing kit, and slide port clips for comprehensive servicing, with an actual weight of 0.19 kg (approximately 0.39 kg packed). Because the Geolast material has been discontinued, the kit notes bilge-application alternatives such as the Santoprene diaphragm (18912-3040) and Viton check valve assembly (18911-7020) to support continued compatibility and performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 21140-2601 bronze pump unit with a flange connection and 080 BSP size is built for efficient fluid handling across marine and industrial applications. Its bronze construction supports durable, reliable performance where dependable fluid transfer is required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 21140-2641 bronze flange pump provides a robust, reliable solution for various pumping applications in marine or industrial settings. Its durable bronze construction and flange design support long-lasting service, while the 080 BSP (British Standard Pipe) thread size helps ensure a suitable connection for efficient pumping performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 22040-0101 bronze pump with a 2 inch connection and 270 flange supports demanding marine and industrial fluid transfer. Its durable bronze construction helps deliver reliable, corrosion-resistant operation across diverse environments, making it suitable for pumping water, chemicals, and other fluids with consistent, efficient performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 22044 bearing housing component is a precision-made spare part designed for pump applications, supporting reliable performance in demanding conditions. Built with durability in mind, it serves as an essential housing element for efficiency-focused operation across various use cases, with installation guidance available through the product documentation or customer support.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 22610-9407 Ballast King DC flexible impeller pump delivers fast ballast water transfer with up to 57 liters per minute (15 gallons per minute) output and self-priming up to 4 ft (1.2 m). Its bronze body and stainless steel shaft enhance corrosion resistance, while the included dry-run impeller helps protect the pump during dry operation. Designed for marine, recreational vehicle, residential, industrial, and ballast-tank applications, it supports 12V DC motor coupling and is also listed for 12V DC or 24V DC system configurations, with a D5 Deutsch connector, 19A maximum current, and a recommended 25A fuse.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 22610-9507 Ballast King DC flexible impeller pump delivers reversible ballast tank filling and emptying using a 12 Volt DC motor with a Reversing Polarity Switch. It pumps up to 15 GPM (57 LPM) and can add 125 pounds of ballast water per minute, while self-priming operation and a dry-run impeller support dependable onboard use. Designed for fresh and saltwater solutions, it operates from -15°C to 60°C and features ports with 1 Inch hose barb and 1/2 Inch BSP internal threaded connections, with installation guidance to keep the motor protected from moisture and to avoid use with petrol or products with a flash point below 37°C.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 22830-2201 flange-mounted pump is a robust fluid transfer unit built from durable 3/8 in bronze and configured as a 10-size pump. BSP threaded ports support a secure, reliable connection, while the flange mounting design helps simplify installation across a range of applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 23020-1101 fluid transfer pump with a brass flange is designed for use with a 60 mm hose, supporting reliable transfer across various applications. Durable construction helps maintain dependable performance, and the 20.00 cm x 20.00 cm x 20.00 cm packaged dimensions make it easier to handle and store.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 23220-2012 Junior Gear Puppy pumping unit delivers versatile 12 V DC fluid transfer for diesel, water, and oil applications. It is a medium duty, continuously rated design capable of up to 13.5 litres/minute (3 gallons/minute) at 5 m head, with self-priming up to 1 m vertical lift for easier operation. A simple construction with few wearing parts, a maximum liquid viscosity of 50 cS, and an included inlet strainer help support reliable performance, while the compact 136 mm x 165 mm x 80 mm size suits tight installations.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 23220-2024 Junior Gear Puppy 24 V DC pump delivers versatile, reliable liquid transfer with a simple design featuring few wearing parts for easier maintenance. It self-primes up to 1 m vertical lift and includes an inlet strainer to help keep pumped liquids clean, while supporting diesel transfer, water, or oil up to 50 cS viscosity (including diesel and light oils). With output up to 13.5 litres/minute (3 gallons/minute) at 5 m head, plus a 5 amp fuse size and 3 amp maximum current, it provides medium duty, continuously rated performance in a compact 136 mm x 165 mm x 80 mm form factor.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 23230-2024 Gear Puppy pump unit is a medium-duty, continuously rated general-purpose transfer pump built for diesel, water, or oil service on 24V DC power. It self-primes up to 1 m vertical lift, uses a simple design with few wearing parts, and handles liquids up to 150 cS viscosity. With 16 mm (5/8 in) bore hose connections, it delivers up to 24 litres/minute (5.3 gallons/minute) at 5 m head while drawing up to 5 amps and using a 7.5 amp fuse, and it includes an inlet strainer for added protection.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 23377-0010 Shaft 080 replacement shaft is a Jabsco spare part designed to support reliable operation in machinery. Described as high-quality and durable, it is built to withstand rigorous use and help maintain optimal performance when servicing compatible Jabsco equipment.
|
Our managers will contact you and clarify the terms of the order
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.