The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 11870-0005 electromagnetic 12V clutch water pump is a high-performance, self-priming unit built to handle water-like and medium viscosity liquids for industrial, marine, and automotive use. A bronze pump body, nitrile impeller, and carbon/ceramic mechanical seal support durable operation in demanding environments, including dirty water with small solid contaminants. With 1-1/4 inch NPT ports and a 62 GPM flow rate at 12V DC, it delivers efficient water transfer, cooling, and circulation while remaining compact and service-friendly.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 12573-3000 accumulator tank with internal bladder helps optimize yacht water systems by delivering smoother flow and quieter operation. Its internal rubber membrane is designed to reduce maintenance needs and supports universal mounting, while the pressurized 1 Quart (1L) capacity helps improve hot water temperature control. Snap-in port fittings simplify installation on both new and existing systems.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 14281-0001 replacement impeller delivers efficient, consistent fluid transfer for marine and industrial pump systems using a 12-blade neoprene design. Its double flat drive hub helps ensure a secure fit, while seawater and oil resistance supports dependable operation in demanding environments such as engine cooling, bilge pumping, and HVAC applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 14470-0001 engine cooling pump unit supports reliable engine cooling with a durable neoprene impeller and 1-1/4 in. hose ports for efficient flow. Built as a direct replacement for the Eaton Pump 1103940, it helps maintain optimal engine temperature and performance across various marine engine applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 15010-0675 sanitary pump unit is a high-quality, reliable solution for sanitary applications, supporting efficient and safe operation in industries where hygiene is paramount. Its robust construction is built for durability and exceptional performance, helping meet the stringent requirements of sanitary pumping systems.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 15170-0005 bulkhead-mounted milk tanker pedestal pump end delivers sanitary, stainless-steel fluid transfer for demanding transport service. Built with a 316 stainless steel pump body, sanitary neoprene impeller, and sanitary carbon face seal, it supports high hygiene requirements while providing up to 90 GPM flow, self-priming from dry up to 7.8 ft, and pressure up to 21.7 psi. The bare shaft pedestal end (no motor) uses 2-inch ACME threaded ports, handles soft solids up to 0.7 inch, minimizes shear on thixotropic fluids, and is certified to US 3A standard 02-11; it now ships under catalog number 15170-7365.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 15500-0000 float switch module provides precise liquid level control for marine, industrial, and other fluid-handling systems. Its durable construction supports long-lasting use, while the design emphasizes dependable performance and straightforward installation and maintenance for reliable level management in boats, machinery, and general fluid systems.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 15780-0100 engine cooling pump is a bronze, bare-shaft marine diesel seawater cooling unit for Cummins K38, K50, KTA38, and KTA50 engines. Its two-impeller design combines a self-priming flexible impeller with a bronze centrifugal impeller to deliver high flow up to 400 GPM while maintaining strong priming performance at low or high speeds. Built from marine-quality bronze and stainless steel with flanged ports, it is engineered for durability, easy service, and reliable operation when suction lines are airtight, with an important limitation of not running dry for more than 30 seconds.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 16400-3350 drum pump tube is a 35-1/2 in (90 cm) long polypropylene transfer tube built to move liquids from containers, carboys, drums, and vats. Its 1 in (25 mm) diameter and slip-on hose discharge ports support straightforward hose connection, while the polypropylene construction makes it well-suited for corrosive liquids. The motor is sold separately, and the updated manufacturer catalog reference is Lutz Pumps 0110-205.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 16400-3400 drum pump tube is a 40 in (102 cm) long polypropylene tube built to empty containers, carboys, drums, and vats while handling corrosive liquids. It uses 1 in (25 mm) diameter slip-on hose discharge ports, and the motor is sold separately. The manufacturer has updated the catalog reference, and it now ships under Lutz Pumps catalog number 0110-205.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 16450-0115 drum pump electric motor delivers efficient liquid transfer and dispensing with a stated flow rate of 26 GPM (100 LPM). It operates on 115 VAC, 60 Hz, single-phase power and includes a self-aligning drive coupling, a built-in power switch safety guard, and an integral circuit breaker with manual reset for dependable operation. Designed for use with Jabsco D100 size drum pump tubes, it features a 20-foot oil-resistant power cord and is intended for various liquid chemicals, but it is not suitable for flammable liquids or explosive environments.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 1673-2001 bronze pedestal pump unit is a flexible impeller water-handling solution for marine and industrial service, supplied as a bare shafted pedestal pump end only without a motor. Its bronze construction with a stainless steel shaft, neoprene impeller, and mechanical seal supports reliable operation in demanding environments, while 1/2 inch NPT ports simplify installation. Self-priming performance lifts up to 10 feet with dry suction and up to 25 feet when wetted, with a nominal flow of 40 litres per minute at 1500 rpm, and the pump can be mounted at any angle and run in either direction.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 17020-0001 epoxy pump unit delivers durable transfer and circulation performance for industrial and laboratory use, using a glass-filled epoxy pump body to reduce corrosion and metallic contamination. It features a 3/8" NPT internal port size, 5.5 GPM flow at 10 feet of head (1750 RPM), and 21.6 PSI maximum pressure, with impeller options in neoprene, nitrile, or Viton. A corrosion-resistant steel shaft with an epoxy drive sleeve and a mechanical carbon-on-ceramic shaft seal support reliable service, while the 115Vac single-phase motor (1/4 HP) includes overload protection and capacitor start.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 17246-0000 macerator motor is a 12-volt drive unit built specifically for the 18590 pump, delivering reliable and efficient operation for marine waste management systems. Engineered for durability, it supports smooth, consistent performance and is well-suited for system upgrades or maintenance to keep the pump running at its best.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 17366-1000 pump shaft is a 316 stainless steel replacement shaft for Jabsco 17360-1001 raw water engine cooling pumps, providing a durable fit for marine cooling service. It is suitable for Caterpillar D-343 and Detroit Diesel V-71 and V-92 engines, and cross-references to Caterpillar 3N5692 and Detroit Diesel 8927572. This shaft also fits multiple Jabsco pump models including 17360-1001, 18760-0001 through 18760-0013, and 18760-3000.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 17867-0000 oil change hose kit supports efficient, mess-free oil changes for marine engines and other machinery. Its durable, high-quality construction is built for long-term reliability, and the user-friendly design helps simplify routine maintenance. Supplied as a complete hose kit, it includes the essential components needed for a seamless oil-changing experience across a range of applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 17906-0000 bearing housing kit is a reliable spare-part component designed to support smooth, efficient operation and help maintain machinery performance and longevity, backed by Jabsco precision engineering for durable service.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18220-1123 ballast pump and motor unit delivers reversible water ballasting for boats using a flexible impeller design with a nitrile (Buna) impeller and lip type seal. Its 12 VDC motor, self-priming non-airlocking operation, and integrated run-dry protection help support fast, reliable fill and drain control, including filling a typical 40-gallon ballast tank in under 5 minutes. With 1/2 inch NPT and 1 inch external hose barb ports, a stated flow rate of 9 GPM (34 LPM), and compliance with USCG 183.410 and ISO 8846 marine standards, it is built for durable intermittent-duty ballast tank service and includes a double throw reversing switch for convenient operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18328-0012 motor kit with crank arm delivers reliable power for marine applications with a 12 Vdc supply. Built to support efficient performance and durability, it helps ensure smooth operation and provides a dependable, long-lasting upgrade for marine equipment.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18510-0000 Centri Puppy centrifugal pump is a non-self-priming DC motor pump for general marine pumping duties where a flooded intake is present. It uses a 3/4 in. NPT internal port and delivers flow up to 20 GPM, making it suitable for livewell filling and circulation and for diesel fuel transfer (not gasoline). This model has been superseded by Jabsco 50830-0012 with the same performance and dimensions and a complete stainless steel construction; orders placed for 18510-0000 are supplied as 50830-0012.
|
Our managers will contact you and clarify the terms of the order
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.