The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 18510-0001 Centri Puppy centrifugal pump unit is built for general pumping duties where a flooded intake condition exists, including livewell filling, circulation, and diesel fuel transfer (not gasoline). It runs on 24V DC at 4 amps with a 5A fuse, and uses a bronze body and impeller with a Viton lip seal and stainless steel shaft for durable service. A 3/4" NPT internal port supports straightforward plumbing, while the fully enclosed, ignition-protected permanent magnet motor helps deliver reliable operation; this pump is not self-priming.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18590-0001 self-priming waste pump unit is built for reliable and efficient waste pumping in marine and RV environments. Its self-priming capability supports consistent performance in tough conditions, and this model has been replaced by Jabsco 18590-2094, which continues the same high-quality standards.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18590-1001 macerator pump unit with a 24 V motor delivers robust waste management performance, providing 46 liters per minute at 0 meters head and 28 liters per minute at 6 meters head. It uses an oil-resistant nitrile impeller, a stainless wearplate, and a stainless steel cutter that reduces particle size to a maximum of 3 mm, while self-priming up to 1.2 meters and supporting short-term dry running for added reliability. With a 38 mm inlet and 25 mm outlet, 8 A current draw, a required 15 A fuse, and compact dimensions of 9.2 cm (H) × 11.9 cm (W) × 29.4 cm (L), it fits demanding installations where consistent maceration and transfer are essential.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18590-1090 macerator pump is a robust marine sanitation pump designed to handle waste disposal reliably. It runs on 12 Volt power and is equipped with a CE Listed EMC motor for compliance-focused operation. A standard 1-1/2 inch inlet supports straightforward installation, and this model is noted as replaced by Jabsco 18590-2092.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18670-6127 Water Puppy commercial-duty electric water pump delivers robust, reliable water pumping for heavy-duty environments using a 12V power supply. Built for commercial use in marine and industrial applications, it features Electromagnetic Compatibility (EMC) to help ensure stable, interference-free operation on boats, commercial vessels, and industrial equipment.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18680-1000 reversible rotary vane pump delivers efficient 12V DC fluid transfer for diesel fuel and other non-flammable liquids in marine environments. Its self-priming design supports up to 3 ft vertical lift, provides reversible flow via a built-in on/off reversing switch, and is engineered for intermittent duty with a 30-minute maximum operating cycle at 10 ft head. Durable bronze construction, a nitrile lip shaft seal, and compliance with USCG 183.410 and ISO 8846 marine standards help ensure reliable, ignition-protected operation on gasoline-powered vessels.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0060 bowl component is a household-size spare part intended for a Jabsco regular-size toilet, built for durable, reliable performance and efficient everyday use. It is listed as no longer available, with Jabsco 29126-0000 noted as an alternative part number.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0073 rotor is a precision-engineered spare part designed for reliable performance in pump systems and confirmed compatibility with the 45700 Series. Its durable construction supports long-lasting operation and helps maintain pump efficiency across marine and industrial applications where dependable performance is essential.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0095 switch kit is a durable upgrade component designed for 18220-series pumps, helping ensure smooth pump operation and precise onboard control. Built to handle harsh marine conditions, it supports reliable water management tasks such as draining bilge water or circulating fresh water, while its easy installation helps maintain overall pump efficiency and performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0180 switch kit provides on/off control for compatible Jabsco search lights, helping ensure convenient and dependable operation on the water. It includes the necessary components to manage search light on/off functionality and is designed for use with the Jabsco Model 61050-0012 and 60020 Series search lights.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0181 toilet hinge set is a compact marine accessory designed to securely attach a toilet seat on compact marine boat toilets. Built from high-quality materials for durability, it helps resist corrosion and wear in demanding marine environments and installs easily for a stable, reliable connection that supports everyday onboard convenience.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0287 12V bulb kit is designed to restore proper illumination and functionality in Jabsco 42440 Series marine lighting systems. It includes a reliable 12V bulb and uses quality construction to help ensure consistent performance and maintain optimal visibility on the water.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0320 12V blower motor is a durable replacement component built to support efficient, consistent operation of a Jabsco pump. Designed to optimize pump performance, it delivers dependable airflow and reliable 12 Volt DC operation for applications where steady performance is essential.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0321 24V blower motor delivers consistent, efficient ventilation performance for a range of environments, including marine and industrial use. Its durable construction is built to withstand challenging conditions, and the 24-volt DC power requirement supports reliable operation when dependable airflow is essential.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0351 sealed-beam replacement lighting unit delivers a flood beam with 12-volt compatibility for dependable illumination. Built for durability and reliable performance, it provides a trusted replacement option and is listed as compatible with the Jabsco 45960-0000 12-volt floodlight. Shipping weight is 0.62 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0437 compact seat and cover set provides a durable, comfort-focused solution for space-restricted installations. Built from robust materials with an ergonomic design, it supports reliable everyday use while remaining easy to install. Intended as a spare part for Jabsco applications, it is designed to fit seamlessly with Jabsco products used in marine toilets, RVs, and similar compact spaces.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0438 toilet upgrade set combines a seat, lid, and hinge hardware to improve comfort and day-to-day usability on a regular marine toilet. Built with quality materials for durability and long service life, it is supplied as a complete set for straightforward installation. This item is listed as no longer available, with Jabsco 29127-1000 noted as an alternative.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0522 lip seal kit is a precision-engineered replacement component built for reliability and durability, using high-quality materials to help ensure a secure seal. Designed for specific applications, it supports marine and industrial uses and helps enhance equipment functionality while extending machinery service life.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0582 motor unit is a 12V EMC-rated motor from Jabsco that is listed as no longer available, with Jabsco 18753-0554 provided as the alternative replacement reference.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 18753-0605 continuous-duty 12 VDC blower motor kit is a spare part for Jabsco systems, designed for the 35770 model to deliver reliable, consistent ventilation. Built for marine and RV applications, it supports efficient air circulation with durable construction intended for continuous operation.
|
Our managers will contact you and clarify the terms of the order
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.