ID
1002542
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Jabsco 1673-2001 bronze pedestal pump unit is a flexible impeller water-handling solution for marine and industrial service, supplied as a bare shafted pedestal pump end only without a motor. Its bronze construction with a stainless steel shaft, neoprene impeller, and mechanical seal supports reliable operation in demanding environments, while 1/2 inch NPT ports simplify installation. Self-priming performance lifts up to 10 feet with dry suction and up to 25 feet when wetted, with a nominal flow of 40 litres per minute at 1500 rpm, and the pump can be mounted at any angle and run in either direction.
- Description
- Ask a Question
-
Jabsco 1673-2001 Bronze Pedestal Flexible Impeller Pump Unit
The Jabsco 1673-2001 is a bronze pedestal, flexible impeller pump designed for efficient water pumping in marine and industrial environments. It is described as a 1/2 horsepower bronze pedestal pump, while the catalog listing specifies a bare shafted pedestal pump end only without a motor, making it well suited for installations where the pump end is required as the core pumping element.
Application
- Marine: Engine cooling
- Marine: Pumping bilges
- Marine: Washdowns
- Marine: Circulating water in bait tanks
- Marine: Utility dockside pump
- Industrial: Circulating and transferring
- Industrial: Velocity mixing
- Industrial: Pumping machine tool coolants
- Industrial: Return spill
- Industrial: Sump drainage
- Industrial: Chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, various acids, tanning liquors, glycerine, brine
- Farming: Pumping water for stock
- Farming: Pumping water from shallow wells and cisterns
- Farming: Pumping liquid ballast into tractor tires
- Plumbing and Home Emergency Use: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and pools
Technical Specifications
Catalog Number 1673-2001 Pump Type Flexible impeller pump (diaphragm pumps referenced in listing) Configuration Bare shafted pedestal pump end only (without a motor) Pump Body Material Bronze Shaft Material Stainless steel Impeller Material Neoprene Shaft Seal Mechanical seal Port Size 1/2 inch NPT Nominal Flow Rate 40 litres/min at 1500 rpm Self-Priming Lift Up to 10 feet vertical lift (dry suction); up to 25 feet when wetted Bearings Two single row ball bearings Temperature Range (Neoprene Impeller) 45°F to 180°F (7°C to 82°C)
Product Details
- Bronze body and stainless steel shaft are well suited for marine environments.
- Replaceable cams and wearplates help extend service life.
- Designed with one moving part: a tough, wear-resistant flexible impeller lubricated by the liquid being pumped.
- No foot valve required.
- Can be mounted in any position; intake and discharge ports are determined by the direction of shaft rotation.
- Pumps in either direction with equal efficiency.
Features
- Self-priming and pumps instantly with dry suction
- Handles thin or viscous liquids and can handle more solids in suspension than other types of rotary pumps
- Operates at low or high speeds
- Will not airlock
- Easy to service and maintain
- Inexpensive to buy and operate
- Will tolerate abrasive wear and handles hard and soft solids without clogging
Operating Notes
- Running dry: Do not run dry for more than 30 seconds; lack of liquid will damage the impeller.
- Fluid limitation: Do not pump light fraction petroleum derivatives, solvents, thinners, or highly concentrated or organic acids; damage to the pump may result.
Spare parts available.
-
Popular products
