The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 53081-2003-110 utility flexible-impeller pump delivers dependable self-priming performance for a wide range of pumping tasks, powered by a 110V, 1-phase, 50Hz AC motor. It provides up to 80 litres per minute at a 3-meter head, with rapid self-priming from dry up to 3 meters and built-in dry-running protection for up to 30 minutes after the initial prime. Durable materials—including a corrosion-resistant bronze body, stainless steel shaft, and nitrile oil-resistant impeller—support long service life, while IP55 protection and 1 1/2 inch BSP internal threaded ports simplify reliable installation.
|
$ 2,075.62
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2003-230 Utility 80 self-priming flexible impeller pump delivers heavy-duty fluid transfer for marine, industrial, and agricultural use with output up to 80 liters per minute and self-priming up to 3 meters from dry conditions. A corrosion-resistant bronze body, stainless steel shaft, nitrile oil-resistant impeller, and carbon-ceramic mechanical shaft seal support long service life, while built-in dry-running protection for up to 30 minutes after initial priming helps protect the pump during demanding operation. Powered by a 230V AC single-phase 50Hz continuously rated IP55 motor, it uses 1-1/2" BSP internal threaded ports and can handle hard and soft solids up to 8 mm.
|
$ 1,722.96
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2003-400 Utility 80' self-priming flexible impeller pump delivers high-performance transfer with a 400 V, 3-phase, 50 Hz AC motor and IP55 protection for challenging environments. It provides up to 80 liters per minute at a 3 m head and supports rapid self-priming from dry conditions up to 3 m, with built-in dry-running protection for up to 30 minutes after initial priming. Durable construction includes a corrosion-resistant bronze body, stainless steel shaft, nitrile oil-resistant impeller, and a carbon-ceramic mechanical shaft seal, plus 1 1/2" BSP internal threaded ports and a simple, serviceable design with few wearing parts.
|
$ 1,605.06
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2053-110 utility pump is built for lubrication oil transfer with a self-priming flexible impeller and a 110-volt, 1-phase, 50Hz AC electric motor for dependable operation. It provides secure 1½” BSP internal threaded ports, delivers up to 40 litres per minute, and self-primes from dry up to 3 meters, while built-in dry-running protection supports up to 30 minutes after initial prime. A corrosion-resistant bronze body, stainless steel shaft, and carbon-ceramic mechanical shaft seal enhance durability, and the simple, fully serviceable design keeps wearing parts to a minimum.
|
$ 2,286.75
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2053-230 utility flexible-impeller pump delivers efficient lube oil transfer with a 230 V AC motor (1-phase, 50 Hz, IP55) and a nitrile oil-resistant impeller. It provides up to 40 litres per minute through 1 1/2 inch BSP internal threaded ports, and its corrosion-resistant bronze body with a stainless steel shaft supports dependable operation in demanding environments. Built-in dry-running protection (up to 30 minutes after initial priming), rapid self-priming up to 3 meters, and a fully serviceable design with minimal wearing parts help reduce downtime.
|
$ 2,108.99
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2061-230 Utility 80 self-priming pump is a high-performance AC unit built for efficient toilet waste handling with 230V, 1-phase, 50Hz power. It uses 1 1/2 in BSP internal threaded inlet and discharge ports, delivers up to 75 litres per minute, and supports a maximum recommended total head of 16 m. Self-priming from dry conditions up to 2.5 m, a dry-run protection body design, and a thermal overload cut-out with manual reset help protect the motor during heavy, continuous-rated use, while the integral carrying handle and compact 240 mm x 200 mm x 320 mm dimensions simplify handling and installation planning.
|
$ 3,135.73
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53081-2063-230 self-priming utility pump delivers reliable handling of toilet waste in demanding marine applications with 230V AC power (1 phase, 50Hz). It features 1-1/2 in BSP internal threaded inlet and discharge ports, supports self-priming from dry up to a 3 m vertical lift, and provides up to 75 L/min at a 3 m total head with a maximum recommended total head of 16 m. A dry-running protection body design, manually reset thermal overload cut-out, continuously rated motor, and integral carrying handle help improve safety, durability, and day-to-day usability, while the compact 240 x 200 x 320 mm footprint aids installation. This model is noted as not available anymore, with alternatives listed as Jabsco 53081-2003-230 and Jabsco 53082-0060.
|
$ 2,525.95
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53082-0000 cam plate is a genuine replacement component for Jabsco 53080 and 53081 series flexible impeller utility pumps, where it deforms the impeller blades to help ensure consistent liquid flow. As a wear item, it should be inspected regularly and replaced when necessary to maintain optimal pump performance. It is compatible with multiple Jabsco pump models and has a shipping weight of 0.30 kg, with listed alternatives to VW 065.121.273 and 065.121.122 part numbers.
|
$ 47.64
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53082-0060 fingerless full cam is a Jabsco spare part designed for utility pump service, offering a dedicated cam (1/1) replacement for compatible pump assemblies. It is listed as compatible with, among others, utility pumps in the 53080 series and 53081 series, and is supplied with a shipping weight of 0.25 kg.
|
$ 188.39
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53085-0000 end cover plate assembly is a replacement component for 53080 Series Jabsco Utility Puppy flexible impeller cooling pumps, designed to securely house and protect internal pump components for reliable performance and long service life. With an approximate 97.0 mm diameter, 3.0 mm thickness, and a 4-hole pattern on an approximately 85.0 mm center-to-center circle, it supports proper fitment and maintenance and is often used with gasket or O-ring options including Jabsco 18753-0263 and X4020-269.
|
$ 80.42
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53270-2011 flexible impeller pump head kit delivers self-priming, non-pulsating flow for marine and general circulation duties, with seawater-suitable bronze and stainless steel construction. It is designed to fit an IEC 71 standard D100 frame motor and uses 2 inch BSP ports, providing up to 270 litres per minute at a 3 m head (at 1500 rpm) with self-priming from dry up to 4.5 m. A carbon/ceramic mechanical seal and a neoprene impeller support durable, gentle pumping across liquid temperatures from 4°C to 82°C.
|
$ 1,819.46
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53270-2011E3 flexible impeller motor pump unit combines a 2 inch B270 bronze pump end with bronze and AISI 316 stainless steel wetted parts for durable, seawater-resistant service. Powered by a 1.5 kW electric motor (400 V, 3 phase, 50 Hz), it delivers up to 270 litres per minute at 3 m head at 1500 rpm, self-primes from dry up to 4.5 m, and provides a non-pulsating, gentle flow suitable for shear-sensitive products across a 4°C to 82°C operating range.
|
$ 2,913.65
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53270-2011H3 flexible impeller motor pump unit delivers efficient liquid transfer with a durable 2 inch B270 bronze and AISI 316 stainless steel build for seawater resistance. It runs on a 400V, 3 phase, 50Hz electric motor at 1430 rpm and uses a neoprene impeller with nitrile seal trim plus a carbon and ceramic mechanical seal for reliable operation. With 2 inch BSP ports, self-priming up to 4.5 m from dry, non-pulsating flow, and a liquid temperature range of 4°C to 82°C, it supports demanding transfer duties with an IE3 high-efficiency motor.
|
$ 2,882.82
-
+
| ||
|
1-2 weeks delivery time The Jabsco 53270-2013 bronze flexible impeller pump head is a self-priming size 270 unit built for Jabsco 53270 series motor-pump units, delivering up to 270 liters per minute with self-priming up to 4.5 m. A bronze pump body with flange adapter supports IEC 71 electric motor installations, while the included stainless steel shaft extension, mechanical seal, 1/1 eccentric, and oil-resistant nitrile impeller help ensure dependable operation. 2" BSP female threaded connections accept a matching male-thread fitting (not included), and the listed shipping weight is 9.00 kg.
|
$ 1,819.46
-
+
| ||
|
1-2 weeks delivery time The Jabsco 5616-0001-B Impeller is constructed from neoprene and is specifically designed to enhance water circulation in Jabsco pumps. Its precise dimensions and durable construction ensure reliable performance in marine environments.
|
$ 98.28
-
+
| ||
|
1-2 weeks delivery time The Jabsco 5616-0001B neoprene impeller is a durable spare-part component built for efficient fluid movement in marine and industrial use. It features a 2-inch outside diameter and 7/8-inch depth with a 6-blade Type G profile, plus a brass insert for dependable fit and wear resistance. Designed for transmission type 6 systems, it fits a 1/2-inch shaft diameter to support reliable operation in demanding applications.
|
$ 98.28
-
+
| ||
|
1-2 weeks delivery time The Jabsco 58005-0000 pressure monitoring gauge provides a dependable way to track system pressure across various applications, featuring a 0–4 bar range and compatibility with Pump Type 24. Supplied as 1 piece, it is identified by EAN 8720193015521 and supports clear pressure monitoring where a reliable gauge is required.
|
$ 24.87
-
+
| ||
|
1-2 weeks delivery time The Jabsco 58020-3012 deluxe electric marine toilet delivers a household-style flush on 12V DC power with an angled 17-inch back for installations against slanted bulkheads. It combines a soft-close seat and lid with a hygienic vitreous china bowl and a powerful macerator discharge pump to break up waste and evacuate efficiently. Built for fresh water flushing, it can be mounted up to 1 meter (3 feet) below the waterline and includes solenoid valve and siphon breaker assemblies for pressurized water systems, with low water usage stated as 1 litre per complete rinse.
|
$ 1,523.28
-
+
| ||
|
1-2 weeks delivery time The Jabsco 58020-3024 deluxe electric marine toilet delivers 24V operation with an angled back for mounting against angled bulkheads, plus a quiet soft-close seat and lid for a more home-like onboard feel. It connects to an existing pressurized fresh water system for flushing and uses a one-touch control panel, while a powerful macerator discharge pump helps break up waste for effective evacuation. Built around a hygienic white vitreous china bowl with concealed plumbing and wiring, it supports 19 mm inlet and 38 mm discharge connections and is rated at 1 litre per complete rinse (also listed as approximately 1.0–2.5 L per flushing), with installation up to 1 meter below the waterline and supplied with a solenoid valve and siphon breaker assembly.
|
$ 1,523.28
-
+
| ||
|
1-2 weeks delivery time The Jabsco 58028-1000 DF angled toilet bowl is a marine spare part designed to upgrade onboard restroom comfort with an approximately 44 cm (17 in) height to the top of the closed lid. Built for harsh marine environments, it is compatible with Jabsco Deluxe Flush models 58020 and 58220 and features an angled back for fitment in marine installations. Its sleek design and efficient flushing mechanism support a modern, reliable marine lavatory setup.
|
$ 714.79
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.