BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 211-60210 fuel filter element is a filtration component for the fuel connections system on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed to trap contaminants and water-borne debris before they reach sensitive fuel-system components, it helps support clean fuel delivery, stable engine operation, and dependable protection for pumps and injectors.
|
$ 104.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 21114-3A000 bearing cap bolt is a cylinder block fastener for BUKH S270J marine diesel engines, used to secure the bearing cap hardware in place. Built for dependable clamping in the lower engine structure, it helps maintain stable bearing alignment and supports smooth, reliable operation under marine duty cycles.
|
$ 17.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 21116-3A000 knock bushing is a precision-fit bushing used in the cylinder block of BUKH S270J marine diesel engines. It supports accurate location and secure seating of mating components in the block assembly, helping maintain proper alignment and dependable service life during engine operation.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 21118-3A000 O-ring is a precision sealing element for the cylinder block on BUKH S270J marine diesel engines. It helps maintain a tight, leak-resistant joint where the cylinder block requires an O-ring seal, supporting stable operation and protecting the engine from fluid loss in marine service.
|
$ 10.33
-
+
| ||
|
1-2 weeks delivery time The Bukh 21119-3A000 cylinder block bolt is a dedicated fastener for securing components on the cylinder block of BUKH S270J marine diesel engines. Designed for correct fit in the engine’s block assembly, it helps maintain reliable clamping force under vibration and thermal cycling in marine operation.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 21120-3A000 bolt is a dedicated fastener used on BUKH S270J marine diesel engines to secure key sealing surfaces on the oil pan and the timing chain cover. It supports dependable clamping force to help maintain leak-tight joints and stable component alignment in the engine assembly.
|
$ 9.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 21124-21000 knock bush is a precision bushing used in the cylinder block assembly of BUKH R210J marine diesel engines. It supports accurate alignment and secure seating of related cylinder block components, helping maintain stable fitment and dependable engine operation in marine service.
|
$ 6.23
-
+
| ||
|
1-2 weeks delivery time The Bukh 21126-4A000 orifice is a precision flow-restriction component used in the cylinder head on BUKH S270J marine diesel engines. Installed as part of the cylinder head assembly, it helps manage internal fluid or gas flow where controlled passage is required, supporting stable engine operation and consistent performance.
|
$ 12.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 21140-3A000 check valve assembly is a cylinder block-mounted non-return valve for BUKH S270J marine diesel engines. It helps maintain correct one-way flow within the block’s internal passages, supporting stable system operation and protecting connected components from reverse flow during changing engine loads and shutdown.
|
$ 39.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 21150-3A002 oil jet assembly is a precision lubrication component for the cylinder block on BUKH S270J marine diesel engines. It helps direct engine oil to critical internal areas, supporting stable lubrication under load and promoting long service life in demanding marine operation.
|
$ 39.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 21151-2F000 oil jet assembly supports dependable lubrication and cooling performance in the cylinder block of BUKH R210J marine diesel engines. Designed to deliver a targeted oil spray where it is needed most, this OEM-grade component helps maintain stable operation under continuous marine duty.
|
$ 48.98
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-00066 stainless steel hose clip is a 30–40 mm clamping fastener for securing coolant hoses on the header tank installation used on BUKH EPA28, EPA36, and EPA48 marine engines. It provides a firm, corrosion-resistant hold to help prevent hose movement and leaks in the engine cooling system.
|
$ 25.62
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-00135 8 mm compression olive is a precision sealing ferrule used on BUKH EPA-series marine diesel installations, supporting secure line retention and leak-tight joints in fuel connection points and associated assemblies. Sized for Ø8 mm tubing, it helps maintain dependable fuel system integrity on EPA28, EPA36, and EPA48 engines, and is also referenced for EPA28 flywheel housing-related fittings.
|
$ 5.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-00135/N 8 mm compression nut is a Ø8 line-fitting fastener used on BUKH EPA28 engines in the flywheel housing and fuel connections, and on EPA36 and EPA48 engines in the fuel connections. It secures compression-type joints to help keep fuel line connections tight and dependable in marine engine installations.
|
$ 5.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-01653 stud coupling is a 1/4 BSPT threaded connector used in the fuel connection assembly on BUKH EPA28, EPA36, and EPA48 engines. Built for secure, leak-resistant fuel line joining, this MC105/163 coupling supports dependable routing and service-friendly replacement in marine fuel systems.
|
$ 24.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-04355 1/8 BSPT 90-degree male-to-female elbow is a galvanized pipe fitting used on the header tank connection points for BUKH EPA28 and EPA36 engines. Its right-angle design supports clean hose and pipe routing in tight engine-room spaces while helping maintain secure, leak-resistant plumbing in the cooling system.
|
$ 42.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-05076 blanking plug is a sealing component used in the thermostat housing on BUKH EPA48 marine engines within the header tank assembly. It closes off the designated port to maintain a leak-tight cooling system, supporting stable coolant circulation and dependable engine temperature control.
|
$ 38.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-06564 test point fitting is a 1/8 BSP connection designed for the header tank on BUKH EPA48 marine engines. It provides a dedicated test point interface to support straightforward system checks and maintenance work on the cooling circuit.
|
$ 33.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-06565 copper sealing washer for 1/8 BSP connections supports leak-free joints in the header tank assembly on BUKH EPA48 marine engines. Designed to compress evenly under fastening load, it helps maintain a secure seal in the cooling system where reliable pressure retention and fluid control matter most.
|
$ 3.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-09293 injection pump inlet (8 mm) is a fuel-connection fitting used at the injection pump on BUKH EPA28 and EPA36 marine diesel engines. It supports a secure, correctly sized fuel feed into the injection pump, helping maintain steady fuel delivery and clean, reliable operation in the engine’s fuel system.
|
$ 119.87
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.