BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 21366-3A000 O-ring is a precision sealing element for the timing chain cover on BUKH S270J marine diesel engines. Installed as part of the timing cover sealing interface, it helps prevent oil leaks and supports clean, reliable operation by maintaining a tight seal where the cover meets the engine.
|
$ 4.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 21378-3A500 hose assembly is a dedicated line used at the timing chain cover area on BUKH S270J marine diesel engines. Designed as an OEM-style replacement, it supports secure fluid routing in this front-engine assembly, helping maintain clean, reliable operation in a marine environment.
|
$ 59.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 21379-3A000 outlet hose assembly is a direct-fit hose unit for the timing chain cover area on BUKH S270J marine diesel engines. Designed to route outlet flow cleanly and securely, it helps maintain dependable circulation through the connected system and supports leak-free operation in the engine compartment.
|
$ 102.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 21440-2F600 oil seal case assembly supports controlled sealing in the crankshaft and piston area on BUKH R210J marine diesel engines. Designed to keep lubricating oil where it belongs, this assembly helps protect rotating components, reduces the risk of oil loss, and supports clean, reliable operation in marine service.
|
$ 55.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 21440-3A501 rear oil seal is a precision sealing component for the timing chain cover on BUKH S270J marine diesel engines. It helps retain lubricating oil inside the engine while keeping contaminants out, supporting clean operation and protecting the timing drive area from leaks during continuous marine duty.
|
$ 70.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 21451-33A02 liquid gasket is a sealing compound used on the oil pan joint for BUKH R210J marine diesel engines. It helps create a secure, oil-tight seal between mating surfaces, supporting clean operation and reducing the risk of leaks in the engine lubrication area.
|
$ 169.46
-
+
| ||
|
1-2 weeks delivery time The Bukh 21510-3A110 upper engine oil pan assembly forms the upper section of the oil pan arrangement on BUKH S270J marine diesel engines. Installed as part of the engine lubrication system, it helps contain and manage engine oil in the sump area for dependable operation in marine service.
|
$ 931.38
-
+
| ||
|
1-2 weeks delivery time The Bukh 21512-41000 nut is a dedicated fastening component for the oil pan on BUKH S270J marine diesel engines. Designed to secure oil pan hardware in place, it helps maintain a tight, stable assembly that supports leak-free operation and dependable engine service in marine environments.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 21514-3A000 oil pan cover is a dedicated engine bottom-end cover for BUKH S270J marine diesel engines, designed to close and protect the oil pan area. Positioned as part of the lubrication system assembly, it helps keep the oil sump section sealed and safeguarded for dependable operation in marine environments.
|
$ 28.39
-
+
| ||
|
1-2 weeks delivery time The Bukh 21515-35701 oil pan bolt is a dedicated fastening component for securing the oil pan on BUKH S270J marine diesel engines. It helps maintain a stable, leak-resistant oil pan installation by keeping the joint clamped correctly under vibration and continuous engine operation.
|
$ 3.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 21516-35710 oil pan bolt is a dedicated fastener used in the oil pan assembly on BUKH R210J and BUKH S270J marine diesel engines. It helps secure the oil pan to maintain a tight, stable joint, supporting leak control and dependable crankcase sealing in harsh marine operation.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 21516-4A010 oil pan fastening bolt is designed to secure the oil pan on BUKH R210J and BUKH S270J marine diesel engines. Installed in the oil pan assembly, it helps maintain a tight, stable joint to support leak-free operation and dependable service in a marine engine room environment.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 21517-3A000 oil pan fastening bolt is built to secure the oil pan on BUKH R210J and BUKH S270J marine diesel engines. Installed in the oil pan assembly, it helps maintain a tight, reliable joint that supports clean, leak-resistant operation in demanding marine service.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 21520-3A000 lower engine oil pan assembly is a dedicated sump component for BUKH S270J marine diesel engines, positioned at the bottom of the lubrication system. It provides a secure reservoir for engine oil and supports clean, reliable oil pickup and circulation, helping protect internal components during continuous marine operation.
|
$ 338.97
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-00052 M6 nut is a marine-grade fastener used on the fuel connection assemblies of BUKH EPA28 and EPA36 engines. It secures fuel-line connections to help maintain a tight, reliable joint that supports clean fuel delivery and reduces the risk of loosening from vibration in marine operation.
|
$ 3.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-00744 locating bolt is an S5 alignment fastener used in the flywheel housing on BUKH EPA28 and EPA36 marine engines. It helps position and secure the flywheel housing accurately during assembly, supporting correct driveline alignment and dependable engine-to-transmission mounting integrity.
|
$ 45.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-03384 hex socket set screw (M10 x 30 mm, 1.25 pitch) is a marine-grade fastener used in the engine support mounting on BUKH EPA48 engines. It helps secure engine support components against vibration and movement, supporting stable alignment and dependable installation in onboard operating conditions.
|
$ 6.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-03974 M6 x 30 mm socket cap head screw is a precision fastener used in the flywheel housing area on BUKH EPA48 marine engines. Designed for secure clamping and reliable retention, it helps keep flywheel housing components properly fixed under vibration and cyclic engine loads.
|
$ 3.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-04719 socket cap head screw (M12 x 25 x 1.25 mm) is a marine-grade fastener used on BUKH EPA48 engines in both the flywheel housing and engine support assemblies. Its hex-socket head design allows secure tightening in confined engine-room spaces, helping keep critical mounting points firmly clamped under vibration and load.
|
$ 11.06
-
+
| ||
|
1-2 weeks delivery time The Bukh 217-99275 M6 spring-lock washer is a vibration-resistant fastener element used across key assemblies on BUKH EPA28, EPA36, and EPA48 marine engines, including fuel connections, the flywheel housing, and engine support points. Its spring action helps maintain clamp load and reduces the risk of fasteners backing off under cyclic engine loads.
|
$ 3.52
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.