BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 212-92270 Murphy S3 speed control elbow is a control-hardware component for the engine support arrangement on BUKH EPA48 marine engines. It provides a clean, guided angle for the speed control interface, helping ensure smooth operation and secure routing within the support assembly.
|
$ 62.64
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97109 equal ended MC105 coupling is a fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine engines. Designed to join matching fuel line ends securely, it supports clean routing and reliable sealing within the fuel connections assembly for dependable fuel system service.
|
$ 85.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97110 equal ended coupling (MC108) is a fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine engines. Designed to join fuel lines with a secure, consistent connection, it supports clean routing and dependable sealing within the engine’s fuel connection layout.
|
$ 60.85
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97112 male stud coupling is a 1/4 BSPT threaded connector used on BUKH EPA28, EPA36 and EPA48 marine diesel engines for both the flywheel housing and fuel connection assemblies. Designed to create a secure, service-friendly joint, it helps ensure tight, dependable threaded connections where a compact stud-style fitting is required.
|
$ 22.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97113 male compression elbow provides a secure 90-degree connection point in the fuel connection layout on BUKH EPA48 marine engines. Built to route fuel lines cleanly in tight engine-room spaces, it supports leak-resistant plumbing and dependable fuel delivery by joining an 8 mm line to a 1/8 BSPT threaded port.
|
$ 55.31
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97114 fuel compression union elbow is a threaded fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed as a 1/4 BSPT elbow (ME108/163), it supports secure routing of fuel lines in tight installations, helping maintain leak-resistant, dependable connections in the engine’s fuel system.
|
$ 44
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-97119 equal elbow ME108 is a fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed to route fuel lines through a right-angle turn while maintaining a matching connection size, it supports clean hose alignment and secure plumbing in the engine’s fuel connection assembly.
|
$ 52
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-99385 threaded male-to-male adapter connects 1/4 in and 3/8 in BSP fittings in the BUKH EPA48 header tank assembly. It provides a secure interface for coolant hose or pipe connections, supporting a tight, service-ready installation in the engine’s cooling system.
|
$ 27.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 212-99403 galvanized 3/8 BSP plug is a compact sealing component used on the header tank of BUKH EPA28, EPA36, and EPA48 marine engines. It closes off a threaded port to help keep the cooling system properly sealed, supporting stable coolant retention and reliable engine temperature control.
|
$ 13.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 21350-3A100 timing chain cover assembly is a dedicated cover unit for the timing chain cover area on BUKH S270J marine diesel engines. It closes off and protects the timing drive section, supporting clean, secure operation of the engine’s front-end timing components in marine service.
|
$ 1,191.69
-
+
| ||
|
1-2 weeks delivery time The Bukh 21352-3A000 sealing component is designed for the timing chain cover on BUKH S270J marine diesel engines. It helps maintain a tight seal at the cover interface, supporting clean, reliable operation by keeping fluids contained and protecting the timing chain area from unwanted ingress in a marine environment.
|
$ 49.64
-
+
| ||
|
1-2 weeks delivery time The Bukh 21353-3A000 sealing element is designed for the timing chain cover on BUKH S270J marine diesel engines. Installed as part of the timing chain cover assembly, it helps maintain a tight seal to keep oil where it belongs and protect the timing area for dependable operation on board.
|
$ 70.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 21354-3A002 left timing chain case cap is a dedicated cover component for the timing chain cover area on BUKH S270J marine diesel engines. It helps close and protect the timing chain case, supporting clean operation and safeguarding internal timing components in a harsh marine engine-room environment.
|
$ 154.12
-
+
| ||
|
1-2 weeks delivery time The Bukh 21355-3A100 right-hand cap assembly for the timing chain cover is designed for BUKH S270J marine diesel engines. Used on the timing chain cover, this component supports a secure, protected enclosure around the timing chain area to help maintain reliable engine operation in marine service.
|
$ 97.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 21356-3A000 timing chain cover bracket provides secure support within the timing chain cover assembly on BUKH S270J marine diesel engines. Designed to hold and stabilize the chain case hardware, it helps maintain correct component alignment and dependable timing drive protection in harsh marine operating conditions.
|
$ 25.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 21358-3A001 oil filler cap provides a secure seal for the oil fill point on the timing chain cover of BUKH S270J marine diesel engines. Designed to close off the oil filler opening, it helps keep the lubrication system protected from contamination while supporting clean, straightforward oil servicing.
|
$ 14.49
-
+
| ||
|
1-2 weeks delivery time The Bukh 21360-3A100 front timing chain cover assembly secures and protects the timing chain cover area on BUKH S270J marine diesel engines. Designed as an OEM-fit cover unit, it helps shield internal timing components from contaminants while supporting a properly enclosed front engine assembly for dependable operation at sea.
|
$ 691.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 21362-3A000 fuel pump cover is a dedicated cover component for the fuel pump area on BUKH S270J marine diesel engines. Installed at the timing chain cover assembly, it helps protect the fuel pump interface and supports a clean, secure engine layout suited to continuous marine operation.
|
$ 47.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 21364-3A000 front oil seal is a precision sealing component for the timing chain cover area on BUKH S270J marine diesel engines. It helps retain engine oil where the rotating shaft passes through the front cover, supporting clean operation and protecting surrounding components from oil leakage in continuous marine service.
|
$ 25.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 21365-3A000 sealing O-ring is a dedicated seal for the timing chain cover on BUKH S270J marine diesel engines. It helps maintain a tight joint at the cover interface, supporting clean, reliable engine operation by keeping fluids contained where they belong.
|
$ 19.66
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.