BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 209-01789 Super 5 thermostat housing is a cooling-system component used on the header tank arrangement for BUKH EPA28 and EPA36 marine diesel engines. It supports correct thermostat installation and coolant routing, helping the engine reach and maintain the intended operating temperature for dependable performance underway.
|
$ 679.02
-
+
| ||
|
1-2 weeks delivery time The Bukh 209-01926 keel-cooling header tank (BV2203) supports stable coolant level control for BUKH EPA48 marine diesel engines. Installed in the header tank section of the cooling system, it provides a dependable reservoir point for the closed-loop circuit to help maintain consistent engine temperature during operation.
|
$ 8,318.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 209-02167 cast-type filler neck provides a secure, service-friendly coolant fill point for the header tank and related heat exchanger filler neck arrangement used on BUKH BETA, EPA28, EPA36, and EPA48 marine engines. Designed to suit the 209-01 tank filler neck application, it supports clean filling and reliable sealing as part of the engine’s cooling system.
|
$ 319.19
-
+
| ||
|
1-2 weeks delivery time The Bukh 209-02323 13 PSI pressure cap is a cooling-system sealing and pressure-control component for BUKH BETA, EPA28, EPA36, and EPA48 header tanks. By maintaining the correct system pressure, it helps raise the coolant boiling point, supports stable operating temperature, and protects the closed-loop cooling circuit during warm-up and load changes.
|
$ 130.89
-
+
| ||
|
1-2 weeks delivery time The Bukh 209-90290 S3 thermostat housing is a cooling-system component for BUKH EPA48 marine engines, installed at the header tank assembly. It supports correct thermostat mounting and coolant routing, helping the engine reach and maintain stable operating temperature in demanding marine service, and it is suited for pre-20 S3 configurations.
|
$ 679.02
-
+
| ||
|
1-2 weeks delivery time The Bukh 20910-2FH00 engine overhaul gasket kit is a complete sealing set intended for major service work on BUKH R210J marine diesel engines. Used during an engine overhaul, it helps restore proper sealing across key engine joints to control fluid leaks, maintain compression integrity, and support reliable operation after rebuild.
|
$ 1,328.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 20910-3AC00 engine overhaul gasket kit is a complete sealing kit for BUKH S270J marine diesel engines, intended for engine rebuild and overhaul work. It helps restore proper sealing across key engine joints, supporting stable compression, controlled fluid passages, and clean, leak-free operation after service.
|
$ 1,328.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-2F901 crankshaft bearing pair set is a matched bearing set for the crankshaft and piston assembly on BUKH R210J marine diesel engines. Designed to support smooth crankshaft rotation under load, it helps reduce friction and maintain stable operation, making it an ideal OEM-style replacement during crankshaft service or rebuild work.
|
$ 58.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-2F902 crankshaft bearing pair set is a matched bearing set for the crankshaft and piston assembly on BUKH R210J marine diesel engines. Built to support smooth crankshaft rotation under load, it helps maintain stable oil film control and dependable bottom-end operation in continuous marine service.
|
$ 58.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-3A902 standard crankshaft bearing pair set supports smooth, stable crankshaft rotation in the crankshaft and piston assembly of BUKH S270J marine diesel engines. Designed as a matched pair for correct fit and load distribution, it helps maintain proper oil film control and reduces wear in high-load marine operating conditions.
|
$ 92.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-3A912 standard crankshaft bearing pair set provides the correct bearing surfaces for the crankshaft in BUKH S270J marine diesel engines. Supplied as a matched pair for the crankshaft and shaft bearing positions within the crankshaft and piston assembly, it supports smooth rotation, stable oil film control, and dependable bottom-end operation under continuous marine loads.
|
$ 92.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-3A922 crankshaft bearing pair set is a matched bearing set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. Designed to support the crankshaft under load, it helps maintain smooth rotation, stable oil clearance behavior, and reliable bottom-end operation in continuous-duty marine service.
|
$ 90.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-3A932 crankshaft bearing pair set is a standard-size bearing set for the crankshaft and shaft arrangement in the BUKH S270J crankshaft and piston assembly. It supports smooth crankshaft rotation under load, helping maintain stable oil film control and dependable bottom-end operation in marine service.
|
$ 92.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 21020-3A942 crankshaft bearing pair set is a standard-designation (STD-E) replacement bearing set for the crankshaft system on BUKH S270J marine diesel engines. Installed within the crankshaft and piston assembly, it supports smooth crankshaft rotation under load and helps maintain stable, reliable operation across the engine’s working range.
|
$ 92.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 21021-3A902 crankshaft center bearing pair set is a standard-size replacement bearing set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. It supports the crankshaft at the center journal to promote smooth rotation, stable oil film control, and dependable bottom-end operation under continuous marine load.
|
$ 297.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 21021-3A912 standard center main crankshaft bearing pair set is built for the crankshaft and piston assembly on BUKH S270J marine diesel engines. This matched bearing set supports the crankshaft at the center main position, promoting stable rotation and controlled oil film clearance for smooth, reliable operation under marine load.
|
$ 297.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 21021-3A922 standard center crankshaft bearing pair set is a matched replacement bearing set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. Designed to support the crankshaft at the center main journal, it helps maintain stable rotation and consistent oil-film lubrication for smooth, dependable engine operation.
|
$ 297.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 21021-3A932 standard crankshaft center bearing pair set supports smooth, stable crankshaft rotation in the crankshaft and piston assembly of BUKH S270J marine diesel engines. Supplied as a matched pair, it helps maintain correct shaft alignment and reliable oil-film support, reducing wear and supporting consistent engine operation under marine load.
|
$ 297.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 21021-3A942 crankshaft center bearing pair set in standard size supports smooth, stable crankshaft rotation in BUKH S270J marine diesel engines. Designed for the crankshaft and piston assembly, this matched bearing pair helps maintain correct oil film control at the center main journal, reducing friction and supporting dependable bottom-end operation under marine load.
|
$ 297.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 21030-2F900 center crankshaft bearing pair set is a precision-fit replacement for the crankshaft and piston assembly on BUKH R210J marine diesel engines. Positioned at the crankshaft center support, it helps maintain correct crankshaft alignment and smooth rotation under load for dependable engine operation.
|
$ 16.75
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.