BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 202-07182RP aft port engine support is a mounting component for the engine support arrangement on BUKH EPA48 marine engines. Positioned at the rear on the port side, it helps secure the engine to its foundation, supporting alignment and reducing unwanted movement under load for dependable operation onboard.
|
$ 518.62
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07182RS starboard aft engine support is a rear mounting support for the engine support system on BUKH EPA48 marine engines. It helps carry engine weight at the aft end, stabilizes the installation, and supports correct drivetrain alignment to reduce vibration and movement under load.
|
$ 760.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07252FS engine support foot set is a handed pair designed for the engine support arrangement on BUKH EPA36 marine engines, positioned on the starboard front support point. It helps secure the engine to its mounting foundation, maintaining alignment and reducing unwanted movement under load for smoother, more reliable operation.
|
$ 580.83
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07252RS engine support foot is a handed mounting component used in the engine support arrangement on BUKH EPA36 marine engines. Designed for secure alignment and stable support, it helps keep the engine properly seated on its mounts to reduce movement and protect drivetrain and coupling alignment under load.
|
$ 580.83
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07357-C 8 mm fuel line pipe is built for the fuel connections on BUKH EPA48 marine diesel engines, providing a secure route for fuel flow between system components. Designed as a direct-fit replacement, it supports clean, dependable fuel delivery and helps maintain a tight, orderly installation in the engine’s fuel plumbing.
|
$ 311.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07358-A fuel return line is a 5 mm leak-off pipe designed for the fuel connection system on BUKH EPA36 and EPA48 marine diesel engines. It routes excess fuel from the injector leak-off/return circuit back through the fuel system, supporting clean, controlled fuel handling and dependable engine operation.
|
$ 291.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07358-D copper fuel leak-off pipe is designed for the fuel connections on BUKH EPA36 marine diesel engines. Built as Fuel Pipe A, it returns leak-off fuel from the injection system to help keep fuel routing controlled, tidy, and dependable in marine service, with an 8 diameter line size for the specified connection.
|
$ 311.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07358-E copper fuel pipe is a fuel leak-off line designed for the fuel connections on BUKH EPA36 marine diesel engines. Built to route excess fuel back from the injection system, it supports clean, controlled return flow and helps keep the fuel system operating reliably.
|
$ 216.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07358-F fuel leak-off pipe is a return line used in the fuel connections system on BUKH EPA36 marine diesel engines. It routes excess or leakage fuel back from the injection components in a controlled way, helping keep the fuel system tidy, reliable, and ready for consistent engine operation.
|
$ 291.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-08664 front port engine support foot secures the front port-side mounting point on BUKH EPA28 marine engines. Built for stable alignment and vibration control at the engine support assembly, it helps keep the powertrain firmly positioned to protect couplings and driveline components during operation.
|
$ 331.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-08665 front starboard engine support foot provides a secure mounting point in the engine support system for BUKH EPA28 marine engines. Designed for the starboard-front position, it helps stabilize the engine on its mounts, supporting proper alignment and reducing unwanted movement under load and vibration.
|
$ 331.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-09842-A thick-wall copper fuel line (8 mm) is designed for the fuel connection layout on BUKH EPA28 marine diesel engines. Built to route fuel cleanly and securely between system components, this rigid pipe supports reliable fuel delivery and a tidy, service-friendly installation in the engine’s fuel connections assembly.
|
$ 158.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-09842-B thick-wall copper fuel pipe is a rigid 8 mm fuel line designed for the fuel connection assembly on BUKH EPA28 marine diesel engines. Built to route fuel cleanly and securely between fuel system components, it supports dependable flow and helps maintain a tidy, vibration-resistant installation in the engine’s fuel connections area.
|
$ 158.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-61350 1 1/2 BSP exhaust flange is a keel-water-cooled exhaust connection flange used on the header tank arrangement for BUKH EPA28, EPA36, and EPA48 engines. It provides a secure interface for the exhaust line, supporting a tight, reliable joint in the exhaust cooling and discharge routing.
|
$ 194.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-62160 Super 5 fuel filter mounting bracket secures the fuel filter in the fuel connections assembly on BUKH EPA28 and EPA36 marine diesel engines (Super 5 Standard Heat Exchanger configuration). It provides a stable, service-friendly mounting point that helps keep the fuel system neatly supported for dependable onboard operation.
|
$ 536.87
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-94100 gear cable bracket is a flywheel-housing mounting console for the remote control gear cable on BUKH EPA48 marine engines. It secures and supports the cable run to help maintain clean alignment and dependable shifting control in marine propulsion installations.
|
$ 255.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-97630 fuel filter mounting bracket secures the fuel filter in the fuel connections assembly on BUKH EPA48 marine engines. It provides a stable mounting point to help keep fuel lines and the filter properly supported, improving serviceability and maintaining an orderly, reliable fuel system layout onboard.
|
$ 258.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 206-03981 PRM150 DS15 damper plate is a flywheel-housing driveline component for BUKH EPA48 marine engines. Installed at the engine-to-gearbox connection, it helps smooth torsional vibration and provides a controlled transfer of torque, supporting quieter operation and protecting the drivetrain under changing loads.
|
$ 2,212.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 208-62300 flywheel housing is a bell housing unit for the flywheel end of BUKH EPA48 marine diesel engines. It supports correct alignment and protection around the flywheel area, helping maintain a secure, stable interface between the engine and connected drivetrain components in marine service.
|
$ 1,936.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 209-01306 keel-cooled header tank is a dedicated header tank for the BUKH EPA36 cooling system. Designed for keel-cooled installations, it supports stable coolant management by providing a header tank point in the circuit, helping maintain consistent engine operating temperature and reliable long-duration running.
|
$ 5,023.52
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.