BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 1G464-9936-4 lower gasket kit is a matched sealing set for the lower gasket assembly on BUKH EPA48 marine engines. Supplied as an optional kit, it supports clean, reliable reassembly by restoring proper sealing where the lower section is opened for service, helping protect the engine from leaks and maintaining dependable operation onboard.
|
$ 2,062.33
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G624-0304-2 complete cylinder head assembly is built for the BUKH EPA48 engine cylinder head system, restoring a secure combustion seal and proper valve-train support. Designed as an OEM-grade replacement, it helps maintain compression, efficient combustion, and stable engine operation in marine duty.
|
$ 9,923.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G642-7305-0 mechanical seal assembly is a critical water pump sealing component for BUKH EPA28 and BUKH EPA36 marine engines. Installed in the water pump, it helps keep coolant where it belongs by sealing the pump shaft area, supporting stable cooling performance and reducing the risk of leakage during continuous marine operation.
|
$ 328.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G675-0304-0 complete cylinder head unit with valve and spring is built for the BUKH EPA28 cylinder head assembly, restoring proper combustion sealing and valvetrain operation. Designed as an OEM-fit replacement, it supports stable compression, efficient gas exchange, and dependable performance in demanding marine duty.
|
$ 10,529.85
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G680-7287-0 water pipe is a cooling-system line for BUKH EPA36 marine engines, routing water through the engine’s water pipe circuit for dependable coolant flow. Designed as an OEM-grade replacement, it supports stable operating temperature by maintaining clean, consistent circulation where the water pipe is installed.
|
$ 165.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G778-6556-0 glow plug rail cord is an electrical distribution component for the nozzle holder and glow plug assembly on BUKH EPA48 marine diesel engines. It connects and feeds the glow plug circuit so the preheating system can warm the combustion area for more dependable cold starting and smoother initial running.
|
$ 100.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G986-9936-2 lower gasket kit provides the sealing elements used in the lower engine area on BUKH EPA36 marine diesel engines. This optional gasket kit is ideal for service work where dependable sealing is critical to maintain clean, leak-free operation and proper assembly integrity.
|
$ 1,185.46
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G994-9935-0 upper gasket kit is a complete upper-end sealing set for BUKH EPA36 marine diesel engines. Designed as an OEM-style replacement kit, it supports clean, reliable reassembly by sealing key upper-engine joints to help maintain proper compression, fluid separation, and stable operation after service work.
|
$ 2,136.23
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G995-9935-3 upper gasket set is a sealing kit for the upper section of the BUKH EPA28 marine diesel engine. Designed to restore tight, reliable joints during service work, it helps prevent fluid and gas leaks in the upper engine area and supports clean, stable operation in marine duty.
|
$ 1,619.63
-
+
| ||
|
1-2 weeks delivery time The Bukh 1G995-9936-6 lower gasket set provides a matched sealing kit for the lower section of BUKH EPA28 marine diesel engines. Designed to support clean, reliable reassembly, this gasket kit helps maintain proper sealing between lower-engine mating surfaces during service work and overhauls, and is supplied as an optional lower gasket kit.
|
$ 1,185.46
-
+
| ||
|
1-2 weeks delivery time The Bukh 200-01133 water temperature switch sensor (95°C, SW/SNO) is a header tank-mounted temperature sensing component for BUKH EPA28, EPA36, and EPA48 marine engines. It monitors coolant temperature in the header tank and provides a switching signal at the rated temperature to support reliable overtemperature warning and protection in the engine cooling system.
|
$ 341.75
-
+
| ||
|
1-2 weeks delivery time The Bukh 200-91730 V-belt pulley is an 80 mm diameter, 70 amp-rated pulley for the engine support arrangement on BUKH EPA48 marine engines. It provides the correct belt drive interface to keep the accessory drive running smoothly, helping maintain dependable charging and stable belt tracking in marine operation.
|
$ 138.30
-
+
| ||
|
1-2 weeks delivery time The Bukh 201-58920/01 small button spacer is a positioning component used in the fuel connection assembly on BUKH EPA48 marine engines. It helps maintain correct spacing and alignment of fuel-line connection hardware, supporting a secure, stable fit in a vibration-prone marine environment.
|
$ 29.07
-
+
| ||
|
1-2 weeks delivery time The Bukh Super 5 short manifold stud (201-62110/01) is a dedicated fastening component for the header tank assembly on BUKH EPA28 and EPA36 marine engines. It provides secure, vibration-resistant clamping where the manifold hardware is mounted, helping maintain a tight, reliable joint in the engine’s cooling-related header tank installation.
|
$ 27.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 201-90330 Super 3 inertia ring is a flywheel housing component for BUKH EPA48 marine engines, supporting smooth rotational stability in the flywheel area. Designed as an OEM replacement part, it helps maintain consistent drivetrain behavior and dependable engine operation under marine load changes.
|
$ 1,216.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-01460 fuel connector block is a fuel distribution element used on BUKH EPA-series marine engines, supporting clean, organized routing at the fuel connection points. Installed in the fuel connections assembly on EPA28, EPA36, and EPA48 engines—and also used at the flywheel housing on EPA28—it helps keep fuel lines securely connected and properly managed for dependable operation.
|
$ 106.50
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-06189 front lifting eye is a dedicated lifting point used to safely handle and position engine-related assemblies on BUKH installations. Applied on the EPA28 engine support and also used with the EPA48 header tank, this component supports secure hoisting during service work on S5 and S3M engine configurations.
|
$ 73.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-06194 throttle cable bracket secures and supports the throttle cable mounting on BUKH EPA48 marine engines. Used in the engine support area, this remote-control mounting console helps keep cable routing stable for smooth, predictable throttle operation and reliable control response underway.
|
$ 180.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07182FP front port engine support is a mounting support used in the engine support arrangement on BUKH EPA48 marine engines. It helps secure the engine at the front mounting point, maintaining correct alignment while supporting the load and reducing transmitted vibration into the hull structure.
|
$ 482.30
-
+
| ||
|
1-2 weeks delivery time The Bukh 202-07182FS front starboard engine support provides secure mounting support in the engine support system for BUKH EPA48 marine diesel engines. Positioned on the front starboard side, it helps stabilize the engine in the bed, reducing movement and supporting correct alignment under load for smoother operation in marine service.
|
$ 482.30
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.