Johnson Pump, part of SPX Flow, specializes in a wide range of pump technologies designed for various liquid handling applications. Their centrifugal pumps are ideal for moving liquids in different sectors, offering efficient fluid circulation and transfer. Internal gear pumps are a cornerstone for handling viscous liquids with precision, making them perfect for industrial processes. Positive displacement pumps from Johnson Pump provide reliable performance with consistent flow, ensuring optimal suction capabilities. Known for their interchangeability and global market presence, Johnson Pump solutions are essential for applications requiring dependable and efficient liquid movement.
|
1-2 weeks delivery time The Johnson Pump 10-13406-08 Aqua-Jet WPS 5.2 pressure pump is a 24V, five-chamber water pressure unit for small boats and recreational vehicles, delivering up to 20 L/min (5.2 GPM) with a 2.8 bar (41 PSI) cut-off via an integrated pressure switch. It self-primes up to 2.5 m, can run dry without damage, and uses a heavy-duty PP housing with a Santoprene diaphragm and EPDM valves for durable service. Supplied with snap-in ports and designed for straightforward installation, it draws 5.5 A and specifies an 8 A fuse for protected operation.
|
$ 415.13
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13407-07 Aqua Jet 5.2 wash down pump delivers a quiet, pulsation-free five-chamber diaphragm system for fast cleaning of leisure equipment. Its 12V setup provides up to 20 l/min (5.2 GPM) with a 5 bar (70 PSI) cut-off pressure, supported by a 185 W motor with built-in overheating protection. Supplied as a complete kit with a spray gun, PUMProtector inlet filter, and connectors for 1/2 in hoses, it also supports BSP and NPT connection standards for flexible installation in marine washdown systems.
|
$ 403.58
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13407-08 Aqua Jet WD 5.2 wash down pump kit delivers high-pressure water flow for efficient marine clean-up, running on a 24 VDC, 185 W motor with built-in thermal protection and an integrated pressure switch for automatic on/off control. A five-chamber positive displacement diaphragm design provides smooth, quiet operation with up to 20 l/min (5.0 GPM) flow and cut-in/cut-out pressure of 50–70 PSI (3.7–5.0 bar), while self-priming up to 3 m and dry-running capability support reliable real-world washdown use. Durable materials and multiple connection options (including 1/2" NPT and 3/4" hose/GHT interfaces) help simplify installation across common washdown setups.
|
$ 437.20
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet WD 5.2 deck wash pump (10-13407-17) delivers quiet, low-pulsation cleaning performance using a five-chamber diaphragm system. With up to 20 L/min output and an automatic cut-off at approximately 5 bar, it helps make washdown faster and easier, while the self-priming design lifts up to 3 m. Built for marine and general cleaning use, it supports dry running without damage, includes a 40 mesh strainer, and runs on 12V with a motor featuring an integrated overheating protection switch.
|
$ 393.57
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet WD 5.2 deck wash diaphragm pump (10-13407-18) delivers quiet, low-pulsation washdown performance with up to 20 L/min flow and an automatic cut-off at approximately 5 bar. Its five-chamber, self-priming design lifts up to 3 m, tolerates dry running without damage, and uses a pressure switch to cycle on and off as the spray nozzle opens and closes. Built for 24V systems, it features a motor with an integrated overheating protection switch and is supplied with a 40 mesh strainer for added system protection.
|
$ 427.22
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13408-01 Aqua Jet Uno 3.5 pressurized water system delivers dependable onboard water pressure for boats and RVs with 12V operation and up to 100W power. It provides up to 2.8 bar (40–41 PSI) cut-out pressure with a 2-liter accumulator tank for smoother flow, and it uses polypropylene pump-body and valve-housing materials plus Santoprene valves and diaphragm for durability. Built-in thermal protection, ISO 8846 ignition protection, and intermittent-duty operation up to 20 minutes help support reliable service in demanding installations.
|
$ 664.55
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13408-02 Aqua Jet UNO pressure water system delivers stable, on-demand water pressure for onboard and mobile installations with a 12 or 24 VDC motor and built-in thermal protection. It supports Aqua Jet UNO 3.5 and 5.2 flow variants (13 L/min or 19.4 L/min) with cut-in pressure of 25 PSI (1.7 bar) and cut-out pressure of 40 PSI (2.8 bar), and includes a 2-liter tank for smoother water delivery. Polypropylene pump components combined with Santoprene valves and diaphragm provide seawater-compatible operation, while ISO 8846 ignition protection and an intermittent duty cycle (max 20 minutes) support safe, reliable use.
|
$ 664.55
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13408-03 Aqua Jet UNO 5.2 pressurized water system delivers efficient onboard water distribution with 12 VDC operation and a maximum pressure of 2.8 bar. It provides high-flow performance (listed as 20 l/min and 5.1 GPM / 19.4 L/min), using Santoprene valves and a Santoprene diaphragm for consistent pressure control. Durable polypropylene components, a 2-liter accumulator tank, and built-in thermal and ignition protection to ISO 8846 support reliable service in harsh marine environments and small craft installations.
|
$ 855.19
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet UNO 5.2 10-13408-04 pressure water system provides a reliable way to maintain onboard water pressure on boats or small craft, using a 24VDC motor with built-in thermal protection and ISO 8846 ignition protection. It delivers up to 2.8 bar (40–41 PSI) shut-off pressure and is listed with a capacity around 19.4–20 L/min (5.1–5.2 GPM), supported by a 2-liter accumulator tank. Polypropylene pump body and valve housing, plus Santoprene valves and diaphragm, help ensure durable performance in marine or mobile installations with intermittent duty operation (maximum 20 minutes).
|
$ 855.19
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet DUO 10.4 water pressure system combines two pumps in parallel to deliver a high-capacity, low-noise pressurized water supply for onboard uses where low amperage and sound levels matter, including showers and galleys. It supports both fresh and sea water operation, runs on 12 VDC (also specified with a 12 or 24 VDC motor with built-in thermal protection), and reaches a maximum cut-out pressure of 2.8 bar (41 PSI). The system includes a 2-liter accumulator tank and an inline strainer/suction filters for pump protection, and the ignition-protected motor design meets ISO 8846 for small craft electrical device safety.
|
$ 1,293.60
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13409-02 Aqua-Jet WPS Duo 10.4 dual-pump water pressure system delivers pressurized water using two Aqua-Jet WPS 5.2 pumps for up to 40 L/min flow, supported by a 2-liter pressure tank for steadier supply. 24V operation (also listed as 24V/200W) with a pressure switch cutout at 2.8 bar (40 PSI) helps maintain consistent pressure, while integrated suction filters and an inline strainer protect against debris. Self-priming up to 2.5 m head, run-dry capability, check valves at the outlets, and a dual-pump configuration that can continue operating if one pump becomes inoperable make it a reliable choice for marine water systems with 19 mm (3/4 in) hose connections.
|
$ 1,349.26
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13410-01 WPS Uno Max 2.9 pressurized water system delivers reliable onboard water supply with 12V operation and 90W power. It provides 11 l/min flow (output listed as 11 or 13 l/min) and a 2.8 bar (41 PSI) switch-off pressure for consistent pressure water performance. A PUMProtector inlet filter and a 2-liter storage tank are included, and the unit is mounted on a lightweight wooden panel for easy installation, with connection sizes listed as 1/2 inch and 3/4 inch hose connection.
|
$ 583.47
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet Uno Max WPS 2.9 pressure water system delivers quiet, reliable pressurized water supply for 24V marine or mobile applications, combining an 11 l/min flow rate with up to 2.8 bar maximum pressure. A 90W motor (5A) supports consistent performance, while the integrated 2-liter tank and included PUMProtector inlet filter help maintain smooth operation in medium-demand installations.
|
$ 669.64
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13411-01 pressurized water system combines a single Aqua Jet water pressure unit with a 2-liter storage tank and PUMProtector™ inlet filter to support medium-sized onboard demand. Powered by 12V / 100W, it delivers up to 13 l/min (3.5 GPM) with a 2.8 bar (41 PSI) switch-off pressure for consistent water supply, and comes mounted on a wooden panel for lightweight, efficient installation.
|
$ 583.47
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Aqua Jet Uno Max WPS 3.5 water pressure system delivers steady pressurized water at 24V/100W with a 13 l/min flow rate and up to 2.8 bar maximum pressure. An integrated 2 L tank supports stable water delivery for various marine or mobile systems, while the listed 5 A current rating and compact, panel-mounted system design help simplify installation.
|
$ 669.64
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13449-11 bronze impeller pump is a self-priming cooling water unit in size F6B-905 built for durable marine service, featuring a bronze pump body for flange mounting and a belt-driven pulley. It includes an MC97 impeller, uses 38 mm hose connections, and is commonly used on multiple Volvo Penta D3 engine variants, with references provided for predecessor and alternative part numbers.
|
$ 911.96
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13517-11 self-priming impeller pump is built for engine cooling duties in size F9 and features an F9B-9 configuration with a 1/1 cam design. Its bronze pump body supports flange mounting with flange connections via a flange adapter, while helical drive gear actuation helps ensure dependable operation. Supplied with a neoprene impeller, it is frequently fitted to Scania D13 engines and can be used as an alternative to the listed Scania and Johnson Pump reference parts.
|
$ 2,735.86
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump Viking Universal 10-13530-01 manual bilge pumping unit delivers a powerful, self-priming solution with Ø38 mm (1 1/2 in) connections and flexible installation via a universal bracket for horizontal or vertical mounting. It supports space-saving customization, allows easy flow-direction changes by switching valves and connections, and includes KlickTite straight and 90° hose connectors for adaptable routing. Built to meet ISO 15083 requirements for bilge pumping systems, it provides 60 L/min (16 GPM) at 45 strokes/min at 1 m (3.28 ft) head (10 kPa / 1.45 PSI), and it can also be used to suction black water and grey water.
|
$ 258.24
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 10-13567-11 self-priming cooling water impeller pump delivers dependable seawater flow for Volvo Penta engine cooling with an F5B-9 fit. Its bronze pump body, serpentine pulley mounting, and lip seal support durable operation, while pulley drive via crankshaft pulley mounting ensures consistent performance. The pump features 32 mm hose connections (1-1/4 in port size) and is supplied with an MC97 impeller plus replacement impeller kit 09-1027B-10.
|
$ 659.17
-
+
| ||
|
1-2 weeks delivery time The Johnson Pump 66101356713 self-priming bronze cooling water impeller pump delivers dependable raw-water flow for Volvo Penta 8.1-liter early model engines. It uses 1-1/4" hose barbs on both inlet and outlet with 32 mm hose connections specified, and includes a stamped flat metal support bracket to help stabilize the installation. A crankshaft/pulley drive with crankshaft pulley mounting, spline-drive impeller hub, and an included MC97 impeller support reliable cooling-water circulation in demanding marine operation.
|
$ 731.51
-
+
| ||
How does the design of Johnson Pump ensure reliability and efficiency in marine systems?
The design of Johnson Pump ensures reliability and efficiency in marine systems by incorporating robust materials and engineering tailored for harsh marine environments. Different pumps, including circulation pumps, are built to handle various marine applications efficiently, ensuring smooth operation and longevity. With a focus on durability and performance, Johnson Pump products are well-suited for many different marine systems, providing consistent and reliable functionality.