ID
1349881
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D3635B7011 Duplex II diaphragm pump is a 115V AC demand-duty unit with a 100 PSI pressure switch and a high-pressure cam. It has a polypropylene pump body with a Buna diaphragm and Buna check valve, plus 3/8 inch NPT female inlet and discharge ports. The pump is self-priming up to 8 ft (2.4 m), can run dry without damage, operates on 50/60 Hz power, has a maximum fluid temperature of 140°F, and weighs 5 lbs.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump With Pressure Switch
The Flojet D3635B7011 is a Duplex II series diaphragm pump built for general industrial fluid handling such as transfer, spraying, cooling, circulation, filtration, and dispensing. It is configured with a pressure switch for automatic on/off demand operation and is designed to self-prime and tolerate intermittent run-dry conditions.
Technical Specifications
Series Duplex II Pump Type Diaphragm pump Motor Voltage 115 Volts AC Frequency 50/60 Hz Pressure Switch Setting (Off Set Point) 100 PSI Body Material Polypropylene Diaphragm Material Buna Check Valve Material Buna Cam High pressure cam Self-Priming Up to 8 ft (2.4 m) Inlet Port 3/8 inch NPT female Discharge Port 3/8 inch NPT female Maximum Fluid Temperature 140°F Weight 5 lbs
Features
- Demand-duty operation: pressure switch shuts the pump off when the discharge valve is closed and pressure reaches 100 PSI, and restarts when pressure drops
- Self-priming up to 8 ft (2.4 m)
- Run-dry capable without damage (intermittent duty)
- Diaphragm and valve design intended to support higher dry vacuum capability
- Pump head can be rotated in 90-degree increments to simplify plumbing
Product Details
- Typical uses include liquid transfer, spraying, cooling, circulation, filtration, and dispensing (general industrial applications).
- Do not use to pump flammable fluids (gasoline, kerosene, fuel oil, etc.) and do not use in an explosive environment.
- Inlet pressure must not exceed 30 PSI (2.1 bar).
- If a check valve is installed in the plumbing, it must have a cracking pressure of no more than 2 PSI (0.14 bar).
- Use a minimum 40 mesh strainer or filter in the inlet line to reduce debris entering the pump.
- Available part: 20914-001A check valve assembly kit (Duplex II series pumps, 115 VAC).
-
Popular products
