- Description
- Ask a Question
-
Circuit Control is a key component of our digital load management system. In addition to the connected buttons, the loads can be controlled by the "virtual buttons" of the Web Devices from NMEA 2000 Wi-Fi Gateway, or automatically from our sensors. Use Switch to set up additional control posts with duplicate physical buttons and indication Control YDSC-04. Loads can also be controlled from all plotters with CZone support: these are all modern plotters Garmin, B&G, Lowrance, Simrad, Furuno and the latest Raymarine models (Axiom, eS, gS).
Circuit Control Electrical Specifications:
- four channels: two with normally open contact (ON-OFF) and two with switching;
- bistable relays consume electricity only during switching, and remain in the same state when the power is turned off;
- maximum direct current 10A per channel, peak 20A (4 seconds, 10% cycle);
- possibility to control loads of DC and AC voltage (up to 400 volts);
- high-voltage isolation with load, 5000 VRMS;
- average consumption current 30 mA.
Circuit Control and Switch Control are compatible with displays and switching equipment from Oceanic Systems, Offshore Systems, Chetco Digital, Maretron and Carling Tech; as well as other NMEA 2000 devices controlled by standard NMEA 2000 PGN 127501 "Binary State Report" and 127502 "Binary Switch Control" messages.
The device has passed NMEA certification. Supply voltage (from NMEA 2000 mains): 7.. 16 volts. Consumption current (average/peak): 30/130 mA. Overall dimensions (including connectors), DhShV: 92x72x38 mm.
Yacht Devices: YDCC-04N. -
Ask a Question
Popular products