VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SP4163 male field connector assembly is a replacement 3-pin male connector intended for use with certain Muir and Maxwell anchor winch remote controls in auto anchor systems. It is referenced by manufacturer codes Maxwell SP4163 and Muir F801092, and is supplied to restore or maintain electrical connection integrity for compatible remote-control installations aboard marine vessels. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus SP4189 anchor winch motor assembly is a 12V, 500W replacement unit specified as a direct replacement for Maxwell RC6 12Volt 500W winches. Identified by manufacturer code SP4189, it is intended to restore operation of anchor winch systems on marine vessels where this RC6 12V 500W motor specification is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus SP4495 bow roller component is a black spare roller specified at 74mm outer diameter and 74mm length, intended for Vetus/Maxwell Maxset bow roller assemblies. It is designed to fit a bow roller assembly using an M12 bolt size. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STE9524D retractable bow thruster unit is specified at 1050N (105kgf) thrust and operates on 24V DC for installation on boats in the 12 to 17 meter range. The retractable configuration is intended to provide thrust without permanently increasing draft, using a flush lid design to minimize drag when stowed, with design elements aimed at reduced noise and vibration and an optimized tunnel length to minimize energy loss; listed functions include automatic extension/retraction, a child lock, a patented fulcrum design for smooth rotation, and protective/intelligent systems to help prevent jamming and overloading. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STELLA12H underwater lighting unit (Stella type) is rated for 12 V operation with a 50 W output to provide powerful illumination in marine environments. It is described as a robust, durable light intended to withstand harsh marine conditions while improving visibility and ambiance for underwater use, including night dive scenarios. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STM2680 coolant temperature switch is a replacement thermo switch for Vetus M2.05, M3.10, and M4.14 Yellow Engines, specified with a G3/8 threaded connection and a single spade terminal. Intended as a direct replacement in the engine cooling system, it supports accurate temperature sensing for correct cooling system operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STM2697 fuel return pipe assembly is a fuel-system component intended to support smooth and reliable fuel return in a marine engine installation. Supplied as a Vetus-manufactured replacement/upgrade part, it is used for renewing or improving the engine’s fuel return circuit to maintain consistent operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STM5255 transmission unit is specified for use with the Vetus ZF25MA-2.74R gearbox configuration and is supplied with a stated ratio of 2.74R. It is identified as a Vetus transmission component intended for marine power transmission applications where compatibility with the ZF25MA-2.74R gearbox is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STM6852 is an end cap specifically designed for use with thermostats, ensuring proper sealing and functionality. It contributes to the efficient regulation of temperature within the system, offering reliability and durability in various applications, including marine and industrial settings. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus STM9196 temperature sensing transmitter is a 2-pin engine temperature monitoring component calibrated to trigger at 75 degrees Celsius for marine engine applications. It is intended to provide temperature-based alert signaling to help prevent overheating conditions within a vessel’s engine monitoring system. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VB200T inflatable boat unit from the V-Quipment Traveler range (VIB series) is supplied as a complete package with an inflatable bottom and a gray with blue color scheme. Standard supplied equipment includes a carry/storage bag, foot pump with pressure gauge, repair kit with spare pump connector, aluminum oars, and an aluminum bench; the specified overall length is 200 cm. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VB230E V-Quipment Explorer inflatable boat assembly is a 230 cm watercraft configured with an aluminum bottom, a pressurized air deck (grey and blue), and a deep V keel for stability and performance. The design incorporates angled stern tubes, trim flaps at the transom for increased planing surface, a folding aluminum deck arrangement, and reinforced protection including a continuous rubbing strake and additional PVC fabric protection on the side tubes. It includes multiple D rings for towing and hoisting, integrated oar storage with a quick storage clamp, flexible bench positioning with provision for an optional second bench, and grab handles at the transom and driver’s position. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VB300E inflatable boat assembly is a 300 cm V-Quipment Explorer (E-Series) tender in PVC construction with a foldable aluminum bottom and a grey/blue Air Deck. It is specified at 300 cm length x 154 cm width with a 42 cm tube diameter, folded dimensions of 115 x 70 x 38 cm, and a boat weight of 44 kg. Rated capacity is 485 kg with a maximum of 3 + 1 child, and the maximum outboard power is 10 hp; supplied with a storage bag, foot pump with pressure gauge, repair kit, and paddles. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VCAPB peaked cap is an apparel accessory intended for casual wear and outdoor activities. It is described as being made with high-quality materials to provide durability and comfort for all-day use, and it is used for sun protection during activities such as being out on the water or exploring the shore. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VD6210622A integrated marine propulsion package combines a Deutz VD6210 engine with a ZF gearbox as supplied, with the gearbox specification stated as ZF63 ratio 1:1.93 and also referenced as ZF68 in the product text. The engine is rated at 210PS/155.0kW at 2400 rpm and features a 6-cylinder configuration with 6060 cm³ displacement. Electrical equipment includes a 12V/160A alternator and a CANbus interface compliant with SAEJ1939, and the package includes a 2-circuit cooling system, MPA34CANBS2l instrument panel, 6 m wiring harness, and flexible LMX140 engine mount; engine technology is described as direct injection, 4-stroke turbo, intercooler common rail, and EMR 3. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VDOORM door mat accessory is a marine-use mat with durable construction intended for boat entrances, providing a protective barrier against dirt, debris, and moisture. Identified as model VDOORM and manufactured by Vetus, it features an elegant design with the Vetus logo for onboard use. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VDR221355 constant-velocity joint assembly is a Type 2 VDR-series driveline component (Joint 21) specified for a 35 mm shaft diameter and a 5 in flange. It integrates a self-aligning axial bearing with a double-acting constant-velocity joint and incorporates a thrust bearing for absorbing propeller thrust, with a stated maximum thrust capacity up to 21,000 N. Construction materials are listed as stainless, black passivated steel, and heavy-duty rubber, and the unit is described as interchangeable within the Vetus VDR series with optional adapter flanges available for Volvo, Yanmar, and Kanzaki gears. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus VDR430455 CV joint assembly is a VETUS DRIVE Type 4 constant-velocity coupling for marine propulsion systems, specified for 45 mm and 50 mm shaft diameters and a 5 in flange connection. It integrates a self-aligning axial bearing with a double-acting constant-velocity joint to absorb propeller thrust, enabling the use of softer engine mounts to reduce vibration and noise. Construction materials are stainless steel, black passivated steel, and heavy-duty rubber, and the unit is stated as suitable for maximum thrust up to 24,000 N; special adapter flanges (including customer-specific versions) are available for compatibility with Volvo, Yanmar, and Kanzaki gears. |
Our managers will contact you and clarify the terms of the order
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.